18181 | 스파이럴 용접강관 제조공정의 유한요소 해석 = Finite element analysis for manufacturing process of spiral seam welding pipeslink 김완재; Kim, Wan-Jae; et al, 한국과학기술원, 2006 |
18182 | 스파이크 발화 기반 뉴론 모델을 이용한 인공 신경회로망 구조 설계 = Design of an artificial neural network architecture based on a spike inspired neuron modellink 김진기; 명현; et al, 한국과학기술원, 2018 |
18183 | 스파크 방전과 탄화수소 응축을 이용한 모형 디젤 입자 발생과 모형입자에 대한 오존 영향 = Generation of model diesel particles by spark discharge and hydrocarbon condensation and ozone effect on model particleslink 김학준; Kim, Hak-Joon; 김상수; 김진호; et al, 한국과학기술원, 2006 |
18184 | 스파크 플러그형 압력센서에서 연결관로의 동적특성과 압력왜곡의 보상에 관한 연구 = A study on dynamic characteristics in extension tube and correction of pressure transducer for S/P type pressure transducerslink 한승국; Han, Seung-Kook; et al, 한국과학기술원, 1991 |
18185 | 스파터 방법으로 증착된 Cr 박막의 두께가 $Al_2O_3$ 기판과의 접착성에 미치는 효과 = The effect of sputter-deposited Cr film thickness on the adhesion of $Al_2O_3$ substratelink 김용식; Kim, Yong-Sic; 강석중; 유진; 김영호; Kang, Suk-Jung L.; et al, 한국과학기술원, 1990 |
18186 | 스파터법으로 제조한 $(Cu/Co/Cu/NiFe)_2O$ 다층막의 자기저항효과에 관한 연구 = A study on the magnetoresistance of $(Cu/Co/Cu/NiFe)_2O$ multilayer thin filmslink 나덕주; Na, Duk-Ju; et al, 한국과학기술원, 1993 |
18187 | 스퍼터 증착한 CoCrTa/Cr박막의 증착조건 및 후 열처리조건에 따른 자기적 특성 = Effects of deposition and post heat treatment conditions on magnetic properties of sputtered CoCrTa/Cr thin filmslink 권세한; Kwon, Se-Han; et al, 한국과학기술원, 1994 |
18188 | 스퍼터링 방법으로 증착된 Al-doped ZnO 박막의 투과전자현미경 분석 = A transmission electron microscopy characterization on the microstructure of Al-doped ZnO films deposited by sputtering methodlink 한준희; Han, Jun-Hee; et al, 한국과학기술원, 2009 |
18189 | 스퍼터링 방법으로 증착된 Sb-Se-Te 박막의 결정화에 관한 투과전자현미경 연구 = A transmission electron microscopy study on the crystallization of sb-se-te thin films deposited by sputtering methodlink 윤종문; Yoon, Jong-moon; et al, 한국과학기술원, 2008 |
18190 | 스퍼터링법으로 증착한 알루미늄 박막의 잔류응력에 따른 결정 배향성이 전기적성질에 미치는 영향 = Effect of crystallographic orientation affected by residual stress on electrical property of Al thin films deposited by sputteringlink 김석필; Kim, Suk-Pil; et al, 한국과학기술원, 1997 |
18191 | 스퍼터링으로 증착한 Cr 박막과 Co/Cr 다층박막의 표면응력변화 실시간측정 = In-situ measurements of the surface stress evolution during sputtering deposition of Cr and Co/Cr thin filmslink 하걸욱; Ha, Gul-Wook; et al, 한국과학기술원, 2004 |
18192 | 스펀지형 마찰 층을 가진 고성능 마찰 전기 나노 발전기에 관한 연구 = (A) study on the high-performance triboelectric nanogenerator with the sponge-like frictional layerlink 황세웅; 윤기완; et al, 한국과학기술원, 2023 |
18193 | 스펙트럼 분할 ASE 주입형 RSOA 기반 WDM PON의 반사 내성에 관한 연구 = High reflection tolerance of RSOA-based WDM PON employing spectrum-sliced ASE sourcelink 전현채; Jeon, Hyeon-Chae; et al, 한국과학기술원, 2009 |
18194 | 스포츠 감성 화질 = Affective image quality for sports contentlink 홍민선; 석현정; et al, 한국과학기술원, 2018 |
18195 | 스프링의 충격 하중에 관한 연구 = Dynamic loading on helical coil springlink 이성근; Lee, Sung-Gun; et al, 한국과학기술원, 1975 |
18196 | 스플라인 유한요소법을 이용한 3차원 형상최적설계에 대한 연구 = A study on the 3D shape optimization using isogeometric analysislink 허준영; Hur, Jun-Young; et al, 한국과학기술원, 2012 |
18197 | 스플라인 유한요소법을 이용한 제어점의 위치 및 가중치를 설계변수로 하는 2차원 형상최적설계 연구 = A study on the 2D isogeometric shape optimization considering both control point positions and weights as design variableslink 송여울; Song, Yeo-Ul; et al, 한국과학기술원, 2013 |
18198 | 스플라인 함수를 이용한 공정 독립적인 비정적 상태의 대신호 모델 = Process independent non-quasi static large signal model using spline functionlink 고경민; Koh, Kyoung-Min; et al, 한국과학기술원, 1999 |
18199 | 스피치 인터페이스를 통해 나타나는 개인용 서비스 로봇의 개성 선호 연구 = A study on the preference of personal service robot\'s personality expressed through speech interfacelink 소희선; So, Hee-Seon; et al, 한국과학기술원, 2006 |
18200 | 스피커 어레이에 음향 밝기대조 제어 방법을 적용한 개인용 음향 시스템의 구현 = A practical realization of personal audio system by applying acoustic contrast control with loudspeaker arraylink 이찬희; Lee, Chan-Hui; et al, 한국과학기술원, 2008 |
18201 | 스피커의 주관적인 평가와 객관적 측정 사이의 상관관계에 대한 연구 = A study on the correlation between subjective and objective data of loudspeakerslink 신성환; Shin, Sung-Hwan; et al, 한국과학기술원, 1999 |
18202 | 스핀 코팅 유동에서의 점성의 온도 의존성의 영향 = Effects of temperature dependency of viscosity on spin coating flowlink 김태성; Kim, Tae-Sung; et al, 한국과학기술원, 1999 |
18203 | 스핀들 회전정도 측정에 관한 연구 = A digital measurement system for spindle accuracylink 박윤창; Park, Yun-Chang; et al, 한국과학기술원, 1988 |
18204 | 스핀코팅 방법으로 합성된 구리산화물 박막의 구조적 특성 연구와 박막트랜지스터 제조 = Structural characterization and TFT application of copper oxide thin films synthesized by spin coatinglink 김상윤; Kim, Sang-Yun; et al, 한국과학기술원, 2012 |
18205 | 스핀코팅법으로 Cu를 흡착시킨 LPCVD 비정질 실리콘 박막의 고상결정화 = Solid phase crystallzation of LPCVD a-Si films adsorbed with Cu by spin coatinglink 조성우; Cho, Seong-Woo; et al, 한국과학기술원, 1995 |
18206 | 스핀코팅법으로 금속을 흡착시킨 PECVD 비정질 실리콘 박막의 저온 결정화에 관한 연구 = A study on the low-temperatue crystallization of PECVD amorphous silicon thin films adsorbed from metal solution by spin coatinglink 박상원; Park, Sang-Won; et al, 한국과학기술원, 1998 |
18207 | 스필오버 수소의 촉매적 기능 연구를 위한 모델 촉매 제안 및 연구 = Development of model catalyst for studying hydrogen spilloverlink 장혜윤; Jang, Hae-Youn; et al, 한국과학기술원, 2014 |
18208 | 슬라이딩 모드 제어기법을 이용한 무단변속기의 슬립과 기어 비 동시 제어 = Slip and gear ratio simultaneous control of a continuously variable transmission using sliding mode controllink 김광희; Kim, Kwang-Hui; et al, 한국과학기술원, 2008 |
18209 | 슬래그 입도가 슬래그 혼합물의 결정화와 기포형성에 미치는 영향 = The effects of the slag particle size on the crystallization and the foam-formation in slag-contained batchlink 박기형; Park, Kee-Hyung; et al, 한국과학기술원, 1976 |
18210 | 슬러리 반응기내의 메탄올 합성 반응 속도 모델링 = Kinetic modeling of methanol synthesis in the slurry reactorslink 김종선; Kim, Jong-Seon; et al, 한국과학기술원, 1995 |
18211 | 슬러리 액적의 미소 폭발 현상에 관한 이론적 해석 = Theoretical consideration on microexplosion ofa slurry dropletlink 조주형; Cho, Ju-Hyeong; et al, 한국과학기술원, 1996 |
18212 | 슬러지 처리를 고려한 하수처리장의 운전 및 설계인자의 종합적인 최적 기준설정에 관한 연구 = Study on optimal criteria of operational and design parameter for integrated sewage and sludge managementlink 박중재; Park, Joong-Jae; et al, 한국과학기술원, 1993 |
18213 | 슬롯 레스트릭터 공기 저어널 베어링에 대한 연구 = A study on slot restrictor air journal bearinglink 박정구; Park, Jeong-Koo; et al, 한국과학기술원, 1994 |
18214 | 슬립이 발생하는 환경에서의 이동 로보트의 자기위치 추정에 관한 연구 = A study on position estimation of mobile robot in slippery environmentlink 최동엽; Choi, Dong-Yup; et al, 한국과학기술원, 1993 |
18215 | 슬립조건을 가지는 홈이 져 있는 마이크로 채널의 전단 구동 유동 = Shear-driven flow in a micro grooved channel with slip conditionlink 박종후; Park, Jong-Hwoo; et al, 한국과학기술원, 2004 |
18216 | 슬릿 임팩터의 입자 부착 효율에 관한 연구 = An experimental study on the collection efficiency of the slit impactorlink 황창덕; Hwang, Chang-Duk; et al, 한국과학기술원, 1988 |
18217 | 슬릿광을 이용한 삼차원 형상측정 = Three-dimensional profile measurement using slit beam projectionlink 김명철; Kim, Myung-Cheol; et al, 한국과학기술원, 1994 |
18218 | 슬릿을 갖는 무한평판 근방에서의 2차원의 느린 점성류 = 2-dimensional slow viscous flow near the infinite flat plates with a slitlink 박선홍; Park, Sun-Hong; et al, 한국과학기술원, 2000 |
18219 | 습기조건과 온도조건하에서 EMC의 파괴인성치 측정 = Measurement of fracture toughness of EMC under various moisture and temperature conditionslink 이창우; Lee, Chang-Woo; et al, 한국과학기술원, 1996 |
18220 | 습식 화학물 처리에 의한 그래핀의 도핑 제어와 그래핀의 구리 확산 방지막으로의 응용 = Doping control of graphene by wet chemical treatments and application of graphene to cu diffusion barrierlink 봉재훈; Bong, Jae-Hoon; et al, 한국과학기술원, 2014 |
18221 | 습식화학방법에 의한 안정화된 $ZrO_2$ 제조 및 특성에 관한 연구 = A study on the preparation and characterization of CaO-stabilized $ZrO_2$ by chemical methodslink 전승범; Jeon, Seung-Beom; et al, 한국과학기술원, 1979 |
18222 | 습증기를 포함한 연소가스의 폐열 회수를 위한 열교환기 성능 예측 = Performance prediction of heat exchanger for waste heat recovery from humid flue gaseslink 정동운; Jeong, Dong-Woon; et al, 한국과학기술원, 2000 |
18223 | 승객중량의 영향을 고려한 승용차 현수장치의 최적 설계와 타당성 연구 = Optimization for the suspension system of a passenger car associated with the effect of passengers and study of validitylink 국금환; Kuk, Kum-Hoan; et al, 한국과학기술원, 1979 |
18224 | 승마 로봇 시뮬레이터를 위한 확률모델 기반의 사용자 인터페이스 개발 = User interface based on probabilistic model for horse-riding robot simulatorlink 서지원; Seo, Ji-Won; et al, 한국과학기술원, 2014 |
18225 | 승용차 멀티링크 현가장치의 준정적 해석 = Quasi-static analysis of vehicle multi-link suspensionlink 이규영; Lee, Kyue-Young; et al, 한국과학기술원, 2000 |
18226 | 승용차 전방유리면의 성에제거에 관한 열/유동 해석 = Prediction of automotive windshield defrosting phenomena using a conjugate heat transfer analysislink 이상돈; Lee, Sang-Don; et al, 한국과학기술원, 1997 |
18227 | 승용차 현가 장치의 기구학적 민감도 해석 및 최적 설계 = Kinematic sensitivity analysis and optimization of automotive suspension systemlink 진종학; Jin, Jong-Hak; et al, 한국과학기술원, 1998 |
18228 | 승용차 현가 장치의 설계변수가 조향계수에 미치는 영향에 대한 연구 = Study of influence on understeer gradient by design variables of automotive suspension systemlink 김영태; Kim, Young-Tae; et al, 한국과학기술원, 1999 |
18229 | 승용차량의 인체-좌석계 진동 승차감 해석 및 평가 방법에 관한 연구 = A study on the ride value assessement for human-seat system of passenger vehiclelink 우춘규; Woo, Chun-Kyu; et al, 한국과학기술원, 1997 |
18230 | 승용차용 교류발전기에서 회전자 이 수와 고정자 슬롯 수 관계가 소음에 미치는 영향 분석 = An analysis on noise of automotive alternator considering the number of rotor segments and stator slotslink 송진섭; Song, Jin-Seob; et al, 한국과학기술원, 1999 |
18231 | 승용차용 완충기 기인 소음에 대한 실험 연구 = An experimental study on shock absorber originated structure-borne noise of a passenger carlink 오경; Oh, Kyoung; et al, 한국과학기술원, 2001 |
18232 | 승차감 향상을 위한 차량 현수 장치의 최적 설계 = Optimal design of a vehicle suspension system for ride quality improvementlink 이세정; Lee, Se-Jeong; et al, 한국과학기술원, 1982 |
18233 | 승차감과 차량전복안정성 향상을 위한 예견 제어 = Preview control of vehicle suspensions for improving ride comfort and rollover stabilitylink 김형진; Kim, Hyung-Jin; et al, 한국과학기술원, 2008 |
18234 | 시.공간 정보를 포함하여 구조화된 데이터 생성을 위한 오토엔코딩 대립적 오토엔코더 = Autoencoding adversarial autoencoder for generating highly-structured data including spatio-temporal informationlink 박찬우; 김종환; et al, 한국과학기술원, 2017 |
18235 | 시/청각적 촉감 인터페이스 디자인에 관한 연구 : 시각과 청각을 이용한 촉감 구현을 중심으로 = A study on the design of visualauditory haptic interface : with emphasis on embodying haptics using visual and auditory perceptionlink 백승화; Paik, Seung-Hwa; et al, 한국과학기술원, 2001 |
18236 | 시각 기반 이족 보행 로봇의 항법을 위한 하이브리드 제어 구조 = Hybrid control architecture for eye-leg coordinated biped robot navigationlink 김기표; Kim, Ki-Pyo; et al, 한국과학기술원, 2004 |
18237 | 시각 대상 추적 임무 수행 시 자세 제어 전략 변화 연구 = The study of postural control strategy change with visual target tracking tasklink 김주형; Kim, Ju-Hyung; et al, 한국과학기술원, 2012 |
18238 | 시각 로봇트를 이용한 그림 짜맞추기에 관한 연구 = A study on the jipsaw puzzle matching by robot visionlink 이지홍; Yi, Ji-Hong; et al, 한국과학기술원, 1985 |
18239 | 시각 센서를 이용한 벨로우즈 생산용 레이저 용접 시스템 = Laser welding system for bellows using vision sensorlink 이승기; Lee, Seung-Key; 유중돈; 나석주; et al, 한국과학기술원, 1998 |
18240 | 시각 정보를 이용한 이동 로보트의 항법 = Mobile robot navigation using vision informationlink 조동권; Cho, Dong-Kwon; et al, 한국과학기술원, 1989 |