Browse "College of Engineering(공과대학)" by Type Article
Showing results 18121 to 18180 of 62306
| Effect of cholesterol nanodomains on monolayer morphology and dynamics Kim, KyuHan; Choi, Siyoung Q.; Zell, Zachary A.; Squires, Todd M.; Zasadzinski, Joseph A., PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, v.110, no.33, pp.3054 - 3060, 2013-08 |
| EFFECT OF CHROMIUM IN SUBSTRATE STEEL ON THE CHEMICAL VAPOR-DEPOSITION OF TIC YOON, SG; Kim, Ho Gi; CHUN, JS, JOURNAL OF MATERIALS SCIENCE, v.22, no.7, pp.2629 - 2634, 1987-07 |
| Effect of circumferential variation of sidewall temperature on buoyant convection in a vertical cylinder Chung, KH; Hyun, Jae Min, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.44, no.13, pp.2583 - 2587, 2001-07 |
| Effect of Closure Approximation on Fiber Orientation Distribution in Injection Molding Han, Kyeong-Hee; Im, Yong-Taek, INTERNATIONAL JOURNAL OF FORMING PROCESS, v.3, no.3-4, pp.213 - 234, 2000-01 |
| Effect of CNT Agglomeration on the Electrical Conductivity and Percolation Threshold of Nanocomposites: A Micromechanics-based Approach Yang, Beomjoo; Cho, K. J.; Kim, Gwangmok; Lee, Haeng-Ki, CMES-COMPUTER MODELING IN ENGINEERING SCIENCES, v.103, no.5, pp.343 - 365, 2014-12 |
| Effect of CNT functionalization on crack resistance of a carbon/epoxy composite at a cryogenic temperature Kim, Myung-Gon; Moon, Jin-Bum; Kim, Chun-Gon, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, v.43, no.9, pp.1620 - 1627, 2012-09 |
| Effect of CNTs on precipitation hardening behavior of CNT/Al-Cu composites Nam, Dong H.; Kim, Yun-Kyoung; Cha, Seung-IL; Hong, Soon-Hyung, CARBON, v.50, no.13, pp.4809 - 4814, 2012-11 |
| EFFECT OF CO AND CO2 ADDITION TO THE CF4/O-2 GAS SYSTEM ON THE ETCHING OF A LOW-PRESSURE CHEMICAL-VAPOR-DEPOSITION TUNGSTEN FILM KWON, SK; KIM, KN; NAM, CW; Woo, Seong-Ihl, JOURNAL OF VACUUM SCIENCE TECHNOLOGY B, v.13, no.3, pp.914 - 917, 1995-05 |
| Effect of CO on NO oxidation over platinum based catalysts for hybrid fast SCR process Irfan, Muhammad Faisal; Goo, Jeong Hoi; Kim, Sang Done; Hong, Sung Chang, CHEMOSPHERE, v.66, no.1, pp.54 - 59, 2007 |
| Effect of co-deformation of ceramic layer in Ag/Al-doped ZnO nanolayered composites Kang, Dong Gyu; Nam, Hyeon Gyun; Kim, Dae Ho; Han, Seung Min Jane, EXTREME MECHANICS LETTERS, v.43, pp.101171, 2021-02 |
| Effect of CO2 gasification reaction on char particle combustion in oxy-fuel conditions Kim, Dae Hee; Choi, Sangmin; Shaddix, Christopher R.; Geier, Manfred, FUEL, v.120, pp.130 - 140, 2014-03 |
| Effect of CO2 hydrate formation on seismic wave velocities of fine-grained sediments Kim, Hak-Sung; Cho, Gye-Chun; Kwon, Tae-Hyuk, GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS, v.14, no.6, pp.1787 - 1799, 2013-06 |
| Effect of CO2 partial pressure on the cathode lithiation in molten carbonate fuel cells Youn, Ju-Young; Ryu, Bo-Hyun; Shin, Mi-Young; Kang, Hyun-Woo; Kim, Hee-Nam; Chang, In-Gab; Lee, Tae-Won; et al, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.37, no.24, pp.19289 - 19294, 2012-12 |
| Effect of coal type on gasification in pressurized drop tube furnace Cho, HC; Cho, KW; Lee, YK; Shin, Hyun Dong; Ahn, DH, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.25, no.5, pp.427 - 438, 2001-04 |
| Effect of cobalamin(III) reduction by sulfide on the reductive dechlorination of tetrachloroethene Amir, Amnorzahira; Lee, Woo-Jin, ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, v.242, 2011 |
| Effect of Color Coding on a Jack Board-type Display 박경수, 대한인간공학회지, v.1, no.2, 1982-12 |
| Effect of compacted wear debris on the tribological behavior of carbon/epoxy composites Lee, HG; Kim, Seong Su; Lee, Dai Gil, COMPOSITE STRUCTURES, v.74, no.2, pp.136 - 144, 2006-07 |
| Effect of compatibilizer on the crystallization kinetics and mechanical properties of nylon 6/LDPE blends Kim, Hak Kil; Kim, Sung Chul, POLYMERS FOR ADVANCED TECHNOLOGIES, v.1, no.0, pp.325 - 334, 1990-09 |
| Effect of compatibilizer on the crystallization, rheological, and tensile properties of LDPE/EVOH blends Lee, Sang Young; Kim, Sung Chul, JOURNAL OF APPLIED POLYMER SCIENCE, v.68, no.8, pp.1245 - 1256, 1997-10 |
| Effect of complex nitrogen source on the synthesis and accumulation of poly(3-hydroxybutyric acid) by recombinant Escherichia coli in flask and fed-batch cultures Lee, SangYup; Chang, Ho Nam, JOURNAL OF ENVIRONMENTAL POLYMER DEGRADATION, v.2, no.3, pp.169 - 176, 1994-07 |
| Effect of composition and synthetic route on the microstructure of biodegradable diblock copolymer, poly(epsilon-caprolactone-co-L-lactide)-b-poly(ethylene glycol) Min, Younjin; Lee, Seongnam; Park, Jung-Ki; Cho, Kuk Young; Sung, Shi-Joon, MACROMOLECULAR RESEARCH, v.16, no.3, pp.231 - 237, 2008-04 |
| Effect of Composition on Dehydrogenation of Mesoporous Silica/Ammonia Borane Nanocomposites Zhao, Yu; Zhang, Junshe; Akins, Daniel L.; Lee, Jae Woo, INDUSTRIAL ENGINEERING CHEMISTRY RESEARCH, v.50, no.17, pp.10024 - 10028, 2011-09 |
| Effect of compositionally graded configuration on the optical properties of BaxSr1-xTiO3 thin films derived from a solution deposition route Tian, HY; Choi, J; No, Kwangsoo; Luo, WG; Ding, AL, MATERIALS CHEMISTRY AND PHYSICS, v.78, no.1, pp.138 - 143, 2003-02 |
Effect of compressibility and non-uniformity in flow on the scattering pattern of acoustic cloak Ryoo, Hyeonbin; Jeon, Wonju, SCIENTIFIC REPORTS, v.7, pp.2125, 2017-05 |
| Effect of compressibility on flow field and fiber orientation during the filling stage of injection molding Lee, SC; Yang, Dong-Yol; Ko, J; Youn, JR, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.70, pp.83 - 92, 1997 |
| Effect of Compressibility on Flow Field Orientation During the Filling Stage of Injection Molding Lee, S. C.; Yang, D. Y.; Ko, J.; Youn, J. R., Journal of Materials Processing Technology, Volume 70, Issues 1-3, October 1997, Pages 83-92, 1997-10 |
| Effect of condensate of food waste (CFW) on nutrient removal and behaviours of intercellular materials in a vertical submerged membrane bioreactor (VSMBR) Chae, SR; Shin, Hang-Sik, BIORESOURCE TECHNOLOGY, v.98, pp.373 - 379, 2007-01 |
| Effect of conductive particle properties on the reliability of anisotropic conductive film for chip-on-glass applications Yim, MJ; Chung, CK; Paik, Kyung-Wook, IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, v.30, pp.306 - 312, 2007-10 |
| Effect of confinement on heat transfer characteristics of a microscale impinging jet Youn, Young-Jik; Choo, Kyo-Sung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.54, no.1-3, pp.366 - 373, 2011-01 |
| Effect of Constriction on Phonon Transport in Silicon Thin Films and Nanowires Dulhani, Jay; Lee, Bong Jae, SMART SCIENCE, v.4, no.4, pp.173 - 179, 2016 |
| Effect of contact angle on contact morphology and Vickers hardness measurement in instrumented indentation testing Kang, Seung-Kyun; Kim, Young-Cheon; Lee, Jin-Woo; Kwon, Dongil; Kim, Ju-Young, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.85, pp.104 - 109, 2014-08 |
| Effect of continuous hybrid process on mechanical and electrical properties of rectangular pure copper wire Joo, Ho Seon; Hwang, Sun Kwang; Kim, Yong Nam; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.244, pp.51 - 61, 2017-06 |
| Effect of cooling rate on growth of the intermetallic compound and fracture mode of near-eutectic Sn-Ag-Cu/Cu pad: Before and after aging Jeong, SW; Kim, JH; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.33, no.12, pp.1530 - 1544, 2004-12 |
| Effect of cooperative and selection relaying schemes on multiuser diversity in downlink cellular systems with relays Kang, Min Suk; Jung, Bang Chul; Sung, Dan Keun, JOURNAL OF COMMUNICATIONS AND NETWORKS, v.10, no.2, pp.175 - 185, 2008-06 |
| Effect of copper on zerovalent iron-based oxidation for the degradation of trichloroethylene Choi, Kyunghoon; Lee, Woojin, ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, v.240, 2010-08 |
| Effect of counter- and co-swirl on low-frequency combustion instabilities of Jet A-1 spray flames Ahn, Byeonguk; Kim, Kyu Tae, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER, v.144, no.10, 2022-10 |
| Effect of Coupling Between Multiple Transmitters or Multiple Receivers on Wireless Power Transfer Ahn, Duk-Ju; Hong, Song-Cheol, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.60, no.7, pp.2602 - 2613, 2013-07 |
| Effect of Cr and Si additions on the continuous-cooling-transformation kinetics of gamma-based Ti-45 at.% Al alloy Lee, CY; Park, Joong Keun, PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, v.81, no.10, pp.2415 - 2426, 2001-10 |
| Effect of Cr Content on Magnetic Properties and Microstructure in CoCr Films of 0.1micrometer Thick Lee, Taek Dong, JOURNAL OF THE MAGNETICS SOCIETY OF JAPAN, v.13, no.1, pp.685 - 690, 1989-01 |
| Effect of Crack Closure on Magnitude of Modulated Wave Lee, Sang Eon; Hong, Jung-Wuk, INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, v.20, no.13, pp.2041018, 2020-12 |
| Effect of Cracking on Drying Permeability and Diffusivity of Concrete Kim, Jin-Keun, ACI MATERIALS JOURNAL, v.84, no.5, pp.351 - 357, 1987-09 |
| Effect of cross-link density and hydrophilicity of PU on blood compatibility of hydrophobic PS hydrophilic PU IPNs Roh, H.W.; Song, M.J.; Han, D.K.; Lee, D.S.; Ahn, J.H.; Kim, Sung Chul, JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION, v.10, no.1, pp.123 - 143, 1999 |
| Effect of crystal morphology transition of polypropylene on interfacial properties of carbon fiber-reinforced composites through AlOOH surface treatment See, Seung Jin; Han, Song Hee; Jeong, Kwang Un; Bae, Il Joon; Hong, Ik Pyo; Choi, Su Kang; Kim, Seong Su, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, v.78, pp.362 - 370, 2015-11 |
| Effect of crystallinity and nonstoichiometric region on dielectric properties of SrTiO3 films formed on Ru Kim, Ja-Yong; Ahn, Ji-Hoon; Kang, Sang-Won; Kim, Jin-Hyock; Roh, Jae-Sung, APPLIED PHYSICS LETTERS, v.91, no.9, 2007-08 |
| Effect of Cu content on the mechanical reliability of Ni/Sn-3.5Ag system Kim, JY; Sohn, YC; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.22, no.3, pp.770 - 776, 2007-03 |
| Effect of Cu content on the photovoltaic properties of Cu(In,Ga)Se-2 solar cells prepared by the evaporation of binary selenide sources Lee, DY; Kim, MS; Larina, L; Ahn, Byung Tae, ELECTRONIC MATERIALS LETTERS, v.4, no.1, pp.13 - 18, 2008-03 |
| Effect of Cu inserted layer between the IrMn and CoFeB interface on magnetic properties of CoFeB Joo, SJ; Hong, DH; Lee, Taek Dong, JOURNAL OF APPLIED PHYSICS, v.95, no.11, pp.7522 - 7524, 2004 |
| Effect of CuIn3Se5 layer thickness on CuInSe2 thin films and devices Kwon, SH; Park, SC; Ahn, Byung Tae; Yoon, KH; Song, JS, SOLAR ENERGY, v.64, no.1-3, pp.55 - 60, 1998-09 |
| Effect of CxNy Molecular Species on Carbon Nitride Thin Films Deposited by Radio Frequency Magnetron Sputtering Roh, Kimin; Na, Byung-Keun; Choi, Si-Kyung; Kim, Jung-Hyung; Seong, Dae-Jin; Kim, Jung-Won, JAPANESE JOURNAL OF APPLIED PHYSICS, v.47, no.11, pp.8530 - 8533, 2008-11 |
| Effect of cyclic strain rate and sulfides on environmentally assisted cracking behaviors of SA508 GR.1a low alloy steel in deoxygenated water at 310 degrees C Jang, Hun; Cho, Hyun-Chul; Jang, Chang-Heui; Kim, Tae-Soon; Moon, Chan-Kook, NUCLEAR ENGINEERING AND TECHNOLOGY, v.40, no.3, pp.225 - 232, 2008-04 |
| Effect of cyclic strain rate on environmental fatigue behaviors of SA508 Gr.1a low alloy steel in 310°C deoxygenated water Cho, H.; Jang, H.; Kim, B.K.; Kim, I.S.; Jang, Changheui, ADVANCED MATERIALS RESEARCH, v.24-25, no.0, pp.1121 - 1124, 2007 |
| Effect of Decarburization Heat Treatment and Chromium Addition on Corrosion Behavior of Carbon Steel Shin, HS; Kim, SW; Kim, HP; Park, Joong Keun, CORROSION, v.65, no.5, pp.326 - 331, 2009-05 |
| Effect of Decarburization Heat Treatment and Chromium Addition on Intergranular Embrittlement of SA-106 Carbon Steel Shin, Ho Sang; Park, Joong Keun, ISIJ INTERNATIONAL, v.51, no.2, pp.291 - 298, 2011 |
| Effect of defects on reaction of NiO surface with Pb-contained solution Kim, Jongjin; Hou, Binyang; Park, Changyong; Bahn, Chi Bum; Hoffman, Jason; Black, Jennifer; Bhattacharya, Anand; et al, SCIENTIFIC REPORTS, v.7, 2017-03 |
| Effect of deformation route on the mechanical properties of CP-Ti deformed by Equal Channel Angular Pressing (ECAP) Chon, S.H.; Liu, S.M.; Kim, T.N.; Park, Joong Keun, KEY ENGINEERING MATERIALS, v.345-346 I, no.0, pp.125 - 128, 2007 |
| Effect of degassed elements on the degradation behavior of carbon nanotube cathodes in sealed field emission-backlight units Lee, S; Jeon, DukYoung, APPLIED PHYSICS LETTERS, v.88, no.6, pp.174 - 185, 2006-02 |
| Effect of degree of coherence in optical lithography using dummy diffraction mask Yim, D; Lee, S; Lee, S; Oh, YH; Chung, HB; Yoo, Hyung Joun, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES REVIEW PAPERS, v.35, no.2A, pp.780 - 785, 1996-02 |
| Effect of delamination on the electromagnetic wave absorbing performance of radar absorbing structures Eun, Se Won; Choi, Won Ho; Jang, Hong-Kyu; Shin, Jae Hwan; Kim, Jin Bong; Kim, Chun-Gon, COMPOSITES SCIENCE AND TECHNOLOGY, v.116, pp.18 - 25, 2015-09 |
| EFFECT OF DEPOSITION PARAMETERS ON THE DEPOSITION CHARACTERISTICS OF CHEMICALLY VAPOR-DEPOSITED PBTIO3 YOON, SG; Kim, Ho Gi, THIN SOLID FILMS, v.165, no.1, pp.291 - 302, 1988-11 |
| Effect of deposition pressure on bonding nature in hydrogenated amorphous carbon films processed by electron cyclotron resonance plasma enhanced chemical vapor deposition Ryu, Ho Jin; Kim, SH; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.277, no.1-2, pp.57 - 63, 2000-01 |
Discover
Open Access
Date issued
- 23,036 2020 - 2024
- 75,360 2010 - 2019
- 57,250 2000 - 2009
- 30,842 1990 - 1999
- 9,025 1980 - 1989