Browse "College of Engineering(공과대학)" by Type Thesis(Master)

Showing results 15741 to 15760 of 24024

15741
금속/복합재료 접착 계면의 파괴 인성치 측정에 관한 연구 = Study on the measurement of fracture toughness of adhesively bonded metal/composite interfacelink

Lee, Jung-Ju; 정광희; Jeong, Gwang-Hee; et al, 한국과학기술원, 2007

15742
금속간화합물 $Ni_3Al$ 촉매박판재의 메탄올분해반응에 미치는 스팀첨가효과 = Effects of $H_2O$ addition on catalytic reaction in methanol decomposition over intermetallic compound $Ni_3Al$ Foilslink

장준혁; Jang, Jun-Hyuk; et al, 한국과학기술원, 2007

15743
금속간화합물 TiAl의 고온산화거동 및 기계적성질에 미치는 Al-21Ti-23Cr 코팅의 효과 = Effects of Al-21Ti-23Cr film on high temperature oxidation behavior and mechanical properties of TiAllink

이호년; Lee, Ho-Nyun; et al, 한국과학기술원, 1997

15744
금속간화합물 TiAl의 고온산화거동 및 기계적성질에 미치는 Yttrium 첨가 $L1_2 (Al,Cr)_3Ti$ 코팅의 효과 = Effects of Y-doped $L1_2 (Al,Cr)_3Ti$ coatings on high-temperature oxidation behavior and mechanical properties of TiAl intermetallic compoundslink

박진민; Park, Zin-Min; et al, 한국과학기술원, 1998

15745
금속간화합물 TiAl의 미세조직 및 기계적 성질에 미치는 탄소 및 질소 첨가의 영향 = Effects of carbon and nitrogen additions on microstructure and mechanical properties of TiAl intermetallicslink

윤주환; Yun, Ju-Hwan; et al, 한국과학기술원, 1996

15746
금속과 복합재료를 사용한 자동차용 일체형 드라이브샤프트의 설계와 제작에 관한 연구 = A study on the design and the manufacture of the automotive one-piece driveshaft with metal and composite materialslink

조덕현; Cho, Durk-Hyun; et al, 한국과학기술원, 1996

15747
금속담지 MCM-41촉매를 이용한 trichloroethylene의 산화반응에 관한 연구 = A study on the oxidation reaction of trichloroethylene using metal-loaded MCM-41 catalystslink

최정미; Choi, Jung-Mi; et al, 한국과학기술원, 1998

15748
금속담지 ZSM-5 촉매상에서 프로판의 방향족화를 이용한 이산화탄소의 환원반응에 관한 연구 = A study on the catalytic reduction of carbon dioxide accompanying the aromatization of propane over metal-loaded ZSM-5 catalystslink

이승우; Lee, Seung-Woo; et al, 한국과학기술원, 1999

15749
금속복합재료용 고부피분율 SiC 예비성형체의 제조공정 및 특성 = Fabrication processes and properties of high volume fraction SiC preforms for metal matrix compositelink

전경윤; Jeon, Kyung-Yun; et al, 한국과학기술원, 1998

15750
금속산화물/금속 이층구조를 이용한 펜타센 유기 박막 트랜지스터의 소스/드레인 접촉에 관한 연구 = Metal oxide/metal Bi-layer for source/drain contact of pentacene OTFTlink

문한얼; Moon, Han-Ul; et al, 한국과학기술원, 2009

15751
금속산화물을 이용한 2단계 물 분해 수소제조의 열중량 분석 및 유동층 반응 특성 = Thermogravimetric analysis and reaction characteristics of hydrogen production from two-step water splitting using metal oxides in a fluidized bed reactorlink

고강석; Go, Kang-Seok; et al, 한국과학기술원, 2006

15752
금속성 쌍곡선 메타물질을 이용한 나노 구조체 제작 = Generation of nanostructures with the metallic hyperbolic metamateriallink

김동환; Kim, Dong Hwan; et al, 한국과학기술원, 2016

15753
금속수소화합물을 이용하는 화학열펌프의 특성에 관한 연구 = A study on the characteristics of chemical heat pump using metal hydrideslink

권기원; Kwon, Kee-Won; et al, 한국과학기술원, 1990

15754
금속이온을 이용한 단백질의 침전분리 = Separation of protein by precipitation using metal ionlink

정재철; Jeong, Jae-Cheol; et al, 한국과학기술원, 1994

15755
금속지지체형 SOFC 단위전지의 열유동해석 = A heat and fluid flow analysis for the metal-supported SOFClink

이상훈; Lee, Sang-Hoon; et al, 한국과학기술원, 2010

15756
금속지지체형 고체산화물 연료전지의 연료극 오믹 저항에 대한 연구 = Study on the anode ohmic resistance of metal-supported solid oxide fuel celllink

이희대; 배중면; et al, 한국과학기술원, 2020

15757
금속파편 충격에 의한 강판의 가속도신호 특성 = Acceleration signal charateristics of steel plate impacted by metallic loose partslink

성게용; Sung, Key-Yong; et al, 한국과학기술원, 1992

15758
금속판재의 인장교정에 대한 유한요소 해석 및 공정변수 설계 = Finite element analysis and process parameter design for the tension levelling of metallic stripslink

박상래; Park, Sang-Rae; et al, 한국과학기술원, 2001

15759
금속표면 특성에 따른 핵비등 열전달의 실험적 고찰 = An experimental study of the nucleate pool boiling on various surface characteristicslink

김충기; Kim, Choong-Ki; et al, 한국과학기술원, 1976

15760
금융자산 가격 시계열의 자기상관성과 분포가 Value at risk 계산에 미치는 영향 = Impact of autocorrelation and probability distribution of underlying financial asset price time series on value at risk computationlink

이호준; Lee, Ho-Jun; et al, 한국과학기술원, 2011

rss_1.0 rss_2.0 atom_1.0