15898 | 나노 물질의 광학적 특성을 이용한 변형률 측정법 개발 = A novel method of strain measurement with optical properties of nano materialslink 장동원; Jang, Dong-Won; et al, 한국과학기술원, 2011 |
15899 | 나노 분해능 및 실시간 영상 획득이 가능한 파장 코딩된 슬릿 공초점 현미경에 관한 연구 = Spectrally encoded slit confocal micrcoscopy with nano-resolution and real-time imaging capabilitylink 김정민; Kim, Jeong-Min; et al, 한국과학기술원, 2006 |
15900 | 나노 실리카 분산계가 함침된 고강도 섬유의 마찰효과가 방탄특성에 미치는 영향 = Friction effect on the ballistic impact behavior of nano silica colloid impregnated high strength fabriclink 이성현; Lee, Song-Hyon; et al, 한국과학기술원, 2008 |
15901 | 나노 압입자를 이용한 박막/모재 구조의 계면파괴인성치 평가 = Evaluation of interfacial toughness of film/substrate by nanoindenterlink 서병국; Suh, Byung-Guk; et al, 한국과학기술원, 2004 |
15902 | 나노 정밀도를 갖는 다축 수직형 마스크 얼라이너의 설계 및 제어에 관한 연구 = Design and Control of a Nano-Precision Multi-Axis Vertical Mask Alignerlink 김효영; Kim, Hyo-Young; et al, 한국과학기술원, 2009 |
15903 | 나노 흡착제가 Li/S 이차전지용 유황양극의 전기화학적 특성에 미치는 영향 = The effects of the nano-sized adsorbing material on the electrochemical properties of sulfur cathode for lithium/sulfur secondary batterylink 송민상; Song, Min-Sang; et al, 한국과학기술원, 2003 |
15904 | 나노다공성 플렉소 스템프 공정을 위한 전기방사된 나노섬유 네트워크 핫 엠보싱 기술 = Hot embossing of electrospun nanofiber network for nanoporous flexography stamplink 엄윤식; Eom, Yoonsick; et al, 한국과학기술원, 2024 |
15905 | 나노압입과 나노리소그래피의 원자수준 전산모사 = Atomistic simulations of nanoindentation and nanolithographylink 이영민; Lee, Young-Min; et al, 한국과학기술원, 2004 |
15906 | 나노여과의 이온 분리 특성에 대한 연구 및 발효 유산 정제에의 응용 = A study on the characteristics of ion separation by nanofiltration and its application to the recovery of lactic acid from fermentation brothlink 강상현; Kang, Sang-Hyeon; et al, 한국과학기술원, 1999 |
15907 | 나노인덴터를 활용한 RF MEMS 스위치의 신뢰성 평가 연구 = Characterization of contact reliability in RF MEMS switch using nano-indenterlink 김동석; Kim, Dong-Seok; et al, 한국과학기술원, 2010 |
15908 | 나노크기 Fumed Silica의 표면 개질 = Surface modification of nanosize fumed silicalink 송신애; Song, Shin-Ae; et al, 한국과학기술원, 2002 |
15909 | 나노탬플릿과 원자층 증착법을 이용한 정렬된 TiN, $TiO_2$ 일차원 나노구조의 제조와 특성평가 = Fabrication and characterization of aligned TiN, $TiO_2$ one-dimensional nanostructures by nanotemplate and atomic layer depositionlink 김상준; Kim, Sang Joon; et al, 한국과학기술원, 2013 |
15910 | 나노템플릿을 이용한 금속 나노와이어 성장에 관한 연구 = A study on the growth of metal nanowires based on template methodlink 신호선; Shin, Ho-Sun; et al, 한국과학기술원, 2007 |
15911 | 나선형의 홈을 가진 관에서의 유동 및 열전달 해석 = Analysis of fluid flow and heat transfer in a tube with spiral grooveslink 윤세명; Yoon, Se-Myoung; et al, 한국과학기술원, 2000 |
15912 | 나일론 6-폴리우레탄-나일론 6 블록 공중합체의 구조와 물성에 관한 연구 = A study on the structure and bulk properties of nylon 6-polyurethane-nylon 6 block copolymerslink 백덕만; Back, Duck-Man; et al, 한국과학기술원, 1984 |
15913 | 나프토퀴논디아지드를 도입한 중합체의 합성 및 감광특성 = Synthesis and characterization of phtosensitive polymers contatining Naphethoquinonediazidelink 정민호; Jung, Min-Ho; et al, 한국과학기술원, 1994 |
15914 | 난류 경계층내의 선형열원으로부터의 열확산 예측을 위한 난류모형 연구 = A study on turbulence models for prediction of heat dispersion from an elevated line source in a turbulent boundary layerlink 조중원; Cho, Chung-Won; et al, 한국과학기술원, 1999 |
15915 | 난류 동축 제트의 초기 영역에 대한 연구 = A study on the initial region of turbulent coaxial jetslink 이동인; Lee, Dong-In; et al, 한국과학기술원, 1981 |
15916 | 난류 동축(同軸) 제트의 구조에 관한 연구 = Study on the structure of turbulent coaxial jetslink 전광민; Chun, Kwang-Min; et al, 한국과학기술원, 1980 |
15917 | 난류 박리-재부착 유동에 대한 4-방정식 열전달 모형 = A low-reynolds-number 4-equation heat transfer model for turbulent separated and reattaching flowslink 이광훈; Rhee, Gwang-Hoon; et al, 한국과학기술원, 1995 |
15918 | 난류 열대류에 대한 실험적 연구 = Experimental study of turbulent thermal convectionlink 정재욱; Cheong, Jae-Wook; et al, 한국과학기술원, 1992 |
15919 | 난류 제트 확산 화염의 천이 영역에서의 화염 구조에 관한 실험적 연구 = An experimental study on the flame structure of the turbulent jet diffusion flame in the transition regionlink 한용식; Han, Yong-Shik; et al, 한국과학기술원, 1989 |
15920 | 난류 확산 화염의 노즐 근처에서의 화염 구조에 관한 실험적 연구 = An experimental study on the structure of turbulent jet diffusion flame near the nozzle exitlink 권용락; Kwon, Yong-Rak; et al, 한국과학기술원, 1990 |
15921 | 난류 확산화염에서 체류시간이 실리카 나노 입자의 생성에 미치는 영향에 대한 연구 = The effect of residence time on the generation of silica nanoparticles in a trubulent diffusion flamelink 곽인재; Kwak, In-Jae; et al, 한국과학기술원, 2007 |
15922 | 난류선회제트 계산에 관한 난류모델 비교연구 = Comparison of various turbulence models for the calculationof turbulent swirling jetslink 최동규; Choi, Dong-Kyu; et al, 한국과학기술원, 1989 |
15923 | 난류와 화학종 메커니즘 차이에 따른 암모니아 연소의 NOx 생성에 대한 수치 해석 = Effects of turbulence and chemical mechanisms on NOx emission of ammonia combustionlink 구인영; 신동혁; et al, 한국과학기술원, 2023 |
15924 | 난류유동 해석을 위한 $V_t -k- \gamma$ 모델의 개발 : Development of $V_t -k- \gamma$ turbulence model for computation of turbulent flows = Development of $V_t -k- \gamma$ turbulence model for computation of turbulent flowslink , 한국과학기술원, 2009 |
15925 | 난류유동장과 관집합체 내에서 진동하는 실린더 사이의 상호공진 = Resonant interaction between turbulent flow field and a vibrating cylinder in a tube banklink 홍신표; Hong, Sin-Pyo; et al, 한국과학기술원, 1985 |
15926 | 난분해성 산업폐수의 오존처리에 의한 생분해성의 향상 = Improving biodegradability of industrial wastewater containing refractory pollutant by ozonationlink 임재림; Lim, Jae-Lim; et al, 한국과학기술원, 1992 |
15927 | 날개단면의 최적설계에 대한 연구 = A study on optimal design of airfoilslink 유충근; Yu, Chung-Keun; et al, 한국과학기술원, 1994 |
15928 | 날갯짓 비행체의 세로 비행 동역학 모델링 = Longitudinal flight dynamics modeling of flapping-wing vehiclelink 이진영; Lee, Jin-Young; et al, 한국과학기술원, 2009 |
15929 | 날갯짓 비행체의 천이 및 상승 비행 궤적 최적화 = Transition and climbing flight trajectory optimization for flapping-wing micro air vehicleslink 이상길; 한재흥; et al, 한국과학기술원, 2022 |
15930 | 납 접합 공정의 유동과 열전달 해석 = Analysis of flow and heat transfer in soldering processlink 송재훈; Song, Jae-Hoon; et al, 한국과학기술원, 1996 |
15931 | 낮은 구동전압과 넓은 동작범위를 갖는 CMOS Image Sensor를 위한 부분선형 로그 능동 픽셀 구조의 설계 = Design of a piece-wise linear logarithmic active pixel structure for low voltage and wide dynamic range CMOS image sensorslink 이하준; Lee, Ha-Jun; et al, 한국과학기술원, 2008 |
15932 | 낮은 레이놀즈수를 갖는 익형 뒤의 와류특성에 관한 연구 = Investigation of vortex characteristics behind an airfoil at low reynolds numberlink 윤희권; Yoon, Hee-Kweon; et al, 한국과학기술원, 1985 |
15933 | 낮은 벽면 온도에서 증기 부착 현상에 관한 실험적 연구 = An experimental study on the vapor deposition at low wall temperaturelink 김영각; Kim, Yung-Kag; et al, 한국과학기술원, 1987 |
15934 | 낮은 위상 잡음을 가지는 LC 공진 발진기에 관한 연구 = Low phase noise LC resonant oscillatorlink 윤상웅; Yoon, Sang-Woong; et al, 한국과학기술원, 2001 |
15935 | 낮은 전압 변동률을 갖는 고전압 DC 전원장치 = High voltage DC power supply with low ripple voltagelink 정창용; Jeong, Chang-Yong; et al, 한국과학기술원, 1995 |
15936 | 낮은 프레임 속도에서 중첩에 초점을 맞춘 다중 객체 추적 = Multi object tracking by focusing on occlusion at low frame rate situationlink 이재혁; Lee, Jae-Hyeok; et al, 한국과학기술원, 2024 |
15937 | 낮은온도, 1기압수소압력하에서 순철과 철합금에 용해되는 수소양에 대한 고찰 = Hydrogen solubility in iron and its alloys at low temperature and atmospheric hydrogen pressurelink 조창국; Cho, Chang-Guck; et al, 한국과학기술원, 1980 |
15938 | 내경 연삭시 CBN 숫돌의 적용에 관한 연구 = A study on the application of CBN wheel in internal grindinglink 정해도; Jeong, Hae-Do; et al, 한국과학기술원, 1989 |
15939 | 내러티브 특성에 근거한 테마뮤지엄 디자인에 관한 연구 : 내러티브 구조 확립을 중심으로 = A study on the theme museum design referring to aspects of narrative : focused on establishment of narrative structurelink 최고운; Choi, Go-Woon; 김명석; 시정곤; et al, 한국과학기술원, 2006 |
15940 | 내부 manifold를 갖는 MCFC 스택 내의 개선된 3차원 열·유동해석 = An improved 3D heat & fluid flow analysis for the MCFC stack with internal manifoldslink 김형섭; Kim, Hyung-Sop; et al, 한국과학기술원, 2006 |
15941 | 내부 순환유동층 연소로에서 석탄연소 및 열전달 특성 = Coal combustion and heat transfer characteristics in an internal circulating fluidized bed combustorlink 박승식; Park, Seung-Sik; et al, 한국과학기술원, 1990 |
15942 | 내부 순환유동층연소로의 수력학적 특성 및 CWM(coal-water-mixture)의 연소특성 = Hydrodynamics and CWA(coal-water-mixture) combustion characteristics in a circulating fluidized bed with a draft tubelink 이운재; Lee, Woon-Jae; et al, 한국과학기술원, 1991 |
15943 | 내부 압력 인가 법을 통한 입자형 핵연료의 탄화규소 코팅 층에 대한 파괴 강도 평가 = Characterization of the fracture strength for SiC coating layer in TRISO fuel particles by internal pressurization testlink 김민우; Kim, Min-U; 김도경; Kim, Do-Kyung; et al, 한국과학기술원, 2008 |
15944 | 내부 온도분포를 고려한 Coal-water mixture 의 점화 현상에 관한 이론적 해석 = Theoretical analysis of ignition of a coal-water mixture particlelink 최창은; Choi, Chang-Eun; et al, 한국과학기술원, 1993 |
15945 | 내부 전원 전압 감소 회로를 내장한 0.18um CMOS 1.2V 340nW 10b 10kS/s SAR ADC = A 0.18um CMOS 1.2V 340nW 10b 10kS/s SAR ADC with internal supply step-downlink 조동신; Jo, Dong-Shin; et al, 한국과학기술원, 2012 |
15946 | 내부발열을 가지는 용기내의 과도자연대류 = Transient confined natural convection with internal heaT generationlink 심영민; Shim, Young-Min; et al, 한국과학기술원, 1996 |
15947 | 내부순환 슬러리 기포탑에서의 휘발성 유기화합물 (TCE/Toluene) 의 광촉매 반응에 의한 동시제거 = Simultaneous removal of volatile organic compounds (TCE/Toluene) by photocatalytic reactions in an internally-circulating slurry bubble columnlink 전진희; Jeon, Jin-Hee; et al, 한국과학기술원, 2002 |
15948 | 내부순환 유동층 반응기에서 연소에 의한 잔사유 탈황 폐촉매 재생 특성 = Regeneration characteristics of spent vacuum residue hydrodesulfurization catalysts by combustionlink 정대성; Jung, Dae-Sung; et al, 한국과학기술원, 2003 |
15949 | 내부순환유동층 반응기에서의 폐타이어 가스화 특성 연구 = Gasification characteristics of waste tire in an internally circulating fluidized bedlink 이승엽; Lee, Seung-Yup; et al, 한국과학기술원, 2000 |
15950 | 내부순환유동층반응기에서의 석탄가스화 반응 특성 = Coal gasification characteristics in an internally circulating fluidized bed reactorlink 김용전; Kim, Yong-Jeon; et al, 한국과학기술원, 1996 |
15951 | 내부순환유동층에서의 수력학적 특성 = Hydrodynamics of an internally circulating fluidized bedlink 김요한; Kim, Yo-Han; et al, 한국과학기술원, 2001 |
15952 | 내부적 보상을 이용한 재구성 기반의 월드 모델 편향 완화 = Bias mitigation of reconstruction-based world model using intrinsic rewardslink 박지훈; 이동환; et al, 한국과학기술원, 2023 |
15953 | 내분비세포통신 메커니즘에 기반한 자가고장복구 디지털회로시스템의 설계 및 구현 = The synthesis of self-repairable digital circuit system inspired from endocrine cellular communicationlink 양이삭; Yang, I-Saak; et al, 한국과학기술원, 2011 |
15954 | 내분비세포통신 메커니즘에 기반한 자가고장복구 디지털회로시스템의 설계 및 구현 = The synthesis of self-repairable digital circuit system inspired from endocrine cellular communicationlink 양이삭; Yang, I-Saak; et al, 한국과학기술원, 2011 |
15955 | 내시경 기반의 초고속 편광 광 간섭 단층 촬영장치 개발 = Catheter based ultra high-speed polarization sensitive optical coherence tomographylink 김민태; 오왕열; et al, 한국과학기술원, 2017 |
15956 | 내압을 받는 원통 복합재 구조물의 볼트 체결 부위 응력 해석 = Stress analysis of bolted joint of cylindrical composite structurelink 박지상; Park, Ji-Sang; et al, 한국과학기술원, 1991 |
15957 | 내압을 받는 튜브 리듀싱에 관한 연구 = Study on the tube reducing process subject to internal pressurelink 이항수; Lee, Hang-Soo; et al, 한국과학기술원, 1987 |