20941 | 자기상관데이타를 위한 잔차관리도의 설계 = Residual control charts with runs rules for autocorrelated datalink 김관덕; Kim, Kwan-Deok; et al, 한국과학기술원, 1997 |
20942 | 자기유변유체 감쇠기를 이용한 지진하중을 받는 구조물의 반능동 신경망제어 = Semiactive neuro-control for seismically excited structure using MR damperlink 이헌재; Lee, Heon-Jae; et al, 한국과학기술원, 2003 |
20943 | 자기유변유체를 이용한 초소형 자가 센싱 근·촉감각 액추에이터 = A sensor-combined miniature kinaestactile actuator based on magnetorheological fluidslink 류세민; Ryu, Se-Min; et al, 한국과학기술원, 2013 |
20944 | 자기장 하에서 밀폐용기 내부의 이중 확산 유동 해석 = Double diffusive convection in an enclosure under magnetizing forcelink 이상윤; Lee, Sang-Yun; et al, 한국과학기술원, 2008 |
20945 | 자기장 하에서 부분적 측벽 경계조건을 가지는 밀폐용기 내부의 자연대류 = Natural convection in a rectangular cavity with partially active side walls under magnetizing forcelink 최동원; Choi, Dong-Won; et al, 한국과학기술원, 2010 |
20946 | 자기장 하에서 원통용기 내부 공기의 비정상 냉각 특성 = Transient air cool-down characteristics in a closed cylindrical cavity under magnetizing forcelink 이승호; Lee, Seung-Ho; et al, 한국과학기술원, 2004 |
20947 | 자기정합된 나노 구조의 SOI 비휘발성 기억소자에 관한연구 = A study on SOI nonvolatile memory device with self-aligned nano structurelink 한상연; Han, Sang-Yeon; et al, 한국과학기술원, 1997 |
20948 | 자기조립 단분자막을 통한 향상된 유지 시간을 갖는 C60 나노 부유 게이트 메모리 = C60 nano-floating gate memory with improved retention time via self-assembled monolayerlink 이승원; Lee, Seung-Won; et al, 한국과학기술원, 2012 |
20949 | 자기조직 신경회로망을 이용한 Axial 스테레오비젼시스템의 대응문제 해결에 관한 연구 = A study on correspondence problem of axial stereo vison system using self-organized neural networklink 조영빈; Cho, Young-Bin; et al, 한국과학기술원, 1993 |
20950 | 자동 공구 교환 장치의 공압을 이용한 개선 = An improvement on the design of automatic tool changer using pneumatic forcelink 박면웅; Park, Myoun-Woong; et al, 한국과학기술원, 1979 |
20951 | 자동 공구 교환장치의 설계 = The design of automatic tool changerlink 박태유; Bark, Tae-You; et al, 한국과학기술원, 1977 |
20952 | 자동 교시 시스템을 위한 시각센서의 보정에 관한 연구 = Study on calibration of vision sensor for automatic teaching systemlink 박성갑; Park, Sung-Gap; et al, 한국과학기술원, 1995 |
20953 | 자동 교시와 용접선 추적을 위한 2단 시각 센서의 구현 = Implementation of laser-vision sensor for automatic teaching and weld seam trackinglink 서건석; Seo, Geon-Seok; et al, 한국과학기술원, 1997 |
20954 | 자동 데이타 베이스 설계를 위한 개념적 모델의 설계 및 번역기의 구현 = The design of conceptual model and implementation of translator for automatic database designlink 정택영; Chung, Taik-Yeong; et al, 한국과학기술원, 1986 |
20955 | 자동 목표 추적장치에 관한 연구 = A study on the implementation of an automatic target tracking systemlink 하정률; Ha, Jeong-Yull; et al, 한국과학기술원, 1988 |
20956 | 자동 반도체 조립 시스템의 관리 제어기 개발에 관한 연구 = A study on development of a supervisory controller for the automatic semiconductor assembly systemlink 이연정; Lee, Yun-Jung; et al, 한국과학기술원, 1986 |
20957 | 자동 반주 알고리즘 설계 및 구현에 관한 연구 = A study on design and implementation of autonomous accompaniment algorithmlink 윤정선; Yoon, Jung-Sun; et al, 한국과학기술원, 1993 |
20958 | 자동 생산 체제에서의 제조 cell 제어의 모의 실험 모형 = A simulation model for controlling manufacturing cell in the flexible manufacturing systemlink 주재윤; Joo, Jae-Yoon; 정원량; 문송천; et al, 한국과학기술원, 1986 |
20959 | 자동 인식을 위한 한글 필기 상자 디자인 = New character box design for handwritten Hangul recognitionlink 김영신; Kim, Young-Shin; et al, 한국과학기술원, 2000 |
20960 | 자동 임피던스 정합 시스템이 포함된 재구성 가능한 소형 ESPAR 안테나 = Compact and reconfigurable beam pattern ESPAR antenna with automatic impedance matching systemlink 유솔지; Yoo, Solji; et al, 한국과학기술원, 2015 |
20961 | 자동 전송률 조절 기법을 적용한 IEEE 802.11a DCF 무선랜 시스템의 성능 분석 = Performance analysis of the IEEE 802.11a DCF wireless LAN system using an auto-rate fallback schemelink 이형진; Lee, Hyung-Jin; et al, 한국과학기술원, 2006 |
20962 | 자동 정렬을 통한 영한 복합어의 역어 추출 = Extraction of English-Korean compound noun translation through automatic alignment methodlink 이주호; Lee, Ju-Ho; et al, 한국과학기술원, 1999 |
20963 | 자동 조립 시스템을 위한 진단 기능을 갖는 구조적 관리 제어에 관한 연구 = A study on a structured supervisory control with diagnosis capability for automatic assembly systemlink 이재혁; Lee, Jae-Hyeok; 변증남; 정명진; et al, 한국과학기술원, 1988 |
20964 | 자동 조립 장치를 위한 Automatic planner및 scheduler의 개발에 관한 연구 = A study on automatic planner and scheduler for assembly celllink 하경호; Ha, Kyeong-Ho; 변증남; 정명진; et al, 한국과학기술원, 1988 |
20965 | 자동 조립 장치를 위한 지능 관리제어기 개발에 관한 연구 = Development of an intelligent supervisory programmable controller for automatic assembly machinelink 전철항; Jeon, Cheol-Hang; et al, 한국과학기술원, 1987 |
20966 | 자동 조정 퍼지 논리를 이용한 슬레이브 암의 시각 서보 기법 = An auto-tuning fuzzy rule-based visual servoing algorithm for a slave armlink 김주곤; Kim, Joo-Gon; et al, 한국과학기술원, 1995 |
20967 | 자동 표고 측정 장치 개발에 관한 연구 = A study on the development of the automatic level measurement systemlink 김종안; Kim, Jong-Ahn; et al, 한국과학기술원, 1997 |
20968 | 자동변속기용 유압 클러치 액추에이터의 축약 모델링 = Reduced-order modeling of a hydraulic clutch actuator for an automatic transmissionlink 김윤태; 최세범; et al, 한국과학기술원, 2020 |
20969 | 자동생산체제(FMS) 의 설계분석을 위한 컴퓨터 시뮬레이션 모델 개발 = Development of computer simulation model for the design analysis of Flexible Manufacturing Systemslink 박정현; Park, Jeong-Hyeon; et al, 한국과학기술원, 1985 |
20970 | 자동시각검사시스템의 화소(畵素)크기 설계 = Design of pixel size for automated visualinspection systemlink 강장희; Kang, Jang-Hee; et al, 한국과학기술원, 1994 |
20971 | 자동차 구조용 고망간-고질소 듀플렉스 스테인리스강 개발 = Development of high Mn-N duplex stainless steel for automobile structural componentslink 박정현; Park, Jung-Hyun; et al, 한국과학기술원, 2004 |
20972 | 자동차 디자인을 위한 신제품 사양 템플릿에 관한 연구 : 온라인 템플릿의 개발을 중심으로 = A study on new product specification template for automobile design : focused on the development of online based product specification templatelink 이민구; Lee, Min-Gu; et al, 한국과학기술원, 2007 |
20973 | 자동차 디젤 엔진 Urea-SCR 시스템용 암모니아 가스 센서에 관한 연구 = A study of NH3 gas sensor for urea-SCR system of diesel engine vehiclelink 이하영; Yi, Ha-Young; et al, 한국과학기술원, 2008 |
20974 | 자동차 배기시스템용 429LM2 스테인리스강의 열적 기계적 피로 거동 모사 = Thermo-mechanical fatigue behavior description of type 429lm2 stainless steel for automobile exhaust systemlink 윤효진; Yoon, Hyo-Jin; et al, 한국과학기술원, 2009 |
20975 | 자동차 부품업체를 위한 웹기반 Product data visualization 시스템 개발 = Web-based product data visualization system for automobile partslink 김혁래; Kim, Hyok-Rae; et al, 한국과학기술원, 2003 |
20976 | 자동차 설계에서의 역공학에 의한 근사곡면 생성 업무분석에 관한 연구 = Rough surfacing process analysis for reverse engineering in automative designlink 국윤권; Kook, Yoon-Kwon; 신하용; 최병규; et al, 한국과학기술원, 2003 |
20977 | 자동차 실내공간의 열적 쾌적성 = Thermal comfort in automotivelink 홍성호; Hong, Sung-Ho; et al, 한국과학기술원, 2006 |
20978 | 자동차 에어백용 극소형 실리콘 가속도 센서의 설계 및 제작 = Design and fabrication of a silicon accelerometer for automotive airbag applicationslink 고종수; Ko, Jong-Soo; et al, 한국과학기술원, 1994 |
20979 | 자동차 에어백용 극소형 실리콘 가속도계의 설계를 위한 연구 = A study on the design of silicon accelerometers for automotive airbag applicationslink 조남규; Cho, Nam-Kyu; et al, 한국과학기술원, 1993 |
20980 | 자동차 외형 디자인의 일관성과 소비자 브랜드 지각의 상관관계 - 모델 간 통일감과 핵심 패밀리룩 요소를 중심으로 - = Correlation between visual consistency in automotive exterior design and consumer brand perception: with a focus on inter-model coherence and core family-look elementlink 조형욱; Jo, Hyoung Wook; 정경원; Chung, Kyung Won; et al, 한국과학기술원, 2015 |
20981 | 자동차 차체 점용접 라인에서 로보트 선정을 고려한 공정계획 알고리즘 개발 = Development of process planning algorithm considering selection of robot in car body spot welding linelink 강신길; Kang, Sihn-Gil; 최병규; 김영대; et al, 한국과학기술원, 1991 |
20982 | 자동차 촉매 컨버터의 동적 모사기 개발 = Development of dynamic simulator for automotive catalytic converterlink 서성이; Suh, Sung-Yi; et al, 한국과학기술원, 2004 |
20983 | 자동차 터보 엔진용 세라믹 로터의 사출 성형에 대한 연구 = A study on injection molding of ceramic rotor for automobile turbo-enginelink 심민식; Shim, Min-Sik; et al, 한국과학기술원, 1992 |
20984 | 자동차부품의 피로강도평가시스템의 구축 = Implementation of fatigue strength evaluation system for automobile componentslink 이동준; Lee, Dong-Jun; et al, 한국과학기술원, 1997 |
20985 | 자동차용 복합재료 범퍼 빔에 관한 연구 = A study on the composite bumper beam for passenger carslink 전성식; Cheon, Seong-Sik; et al, 한국과학기술원, 1995 |
20986 | 자동차용 부러시레스 발전기의 자극 설계 = Poledesign of breshless generator for automobile uselink 박양배; Park, Yang-Bai; et al, 한국과학기술원, 1975 |
20987 | 자동차용 브레이크 마찰재의 마찰계수와 Groan 소음과의 상관관계에 대한 연구 = A study on correlation between Groan noise and friction coefficient of friction materiallink 한규봉; Han, Kyu-Bong; et al, 한국과학기술원, 2004 |
20988 | 자동차용 알루미늄/복합재료 하이브리드 동력전달축의 설계와 제작에 관한 연구 = A study on the design and manufacture of automotive aluminum/composite hybrid propeller shaftslink 김학성; Kim, Hak-Sung; et al, 한국과학기술원, 2003 |
20989 | 자동차용 파워모듈 솔더접합부의 신뢰성 평가에 관한 연구 = A study on reliability evaluation of solder joints in automotive power module packagelink 왕웅재; Wang, Wung Jae; et al, 한국과학기술원, 2016 |
20990 | 자동차용부러시레스발전기의 중량최적설계 = Optimum weight design of the automotive brushless generatorlink 양창주; Yang, Chang-Joo; et al, 한국과학기술원, 1975 |
20991 | 자동차주위의 3차원 유동계산과 컴퓨터 그래픽스의 이용 = Three-dimensional flow calculation about an automobile configuration and the use of computer graphicslink 최장섭; Choi, Jang-Sup; et al, 한국과학기술원, 1988 |
20992 | 자동차형 로봇을 위한 다수의 센서 정보를 융합한 실외 위치 추정 = Outdoor localization using multi-sensor fusion for a car-like robotlink 배상훈; Bae, Sang-Hoon; et al, 한국과학기술원, 2011 |
20993 | 자동차형 로봇을 위한 다수의 센서 정보를 융합한 실외 위치 추정 = Outdoor localization using multi-sensor fusion for a car-like robotlink 배상훈; Bae, Sang-Hoon; et al, 한국과학기술원, 2011 |
20994 | 자동차형 로봇을 위한 도심 지역 실외에서의 효율적인 위치 추정 및 네비게이션 시스템의 구현 = Implementation of an efficient urban outdoor localization and navigation system for car-like mobile robotslink 윤건우; Yoon, Gun-Woo; et al, 한국과학기술원, 2013 |
20995 | 자동창고 전용 시뮬레이터 개발에 관한연구 = Development of a simulator for automated storage/retrieval systemslink 배영일; Bae, Young-Il; et al, 한국과학기술원, 1994 |
20996 | 자동초점기능을 갖는 비접촉 측정용 현미경프로브의 개발 = Design of an optical probe with auto-focusing capability for non-contact coordinate measurementlink 황명원; Hwang, Myung-Won; et al, 한국과학기술원, 1994 |
20997 | 자동학습을 이용한 목표시장 설정에 관한 연구 = Target marketing using machine learninglink 조영빈; Cho, Yeong-Bin; et al, 한국과학기술원, 1988 |
20998 | 자력을 이용한 극청정 내면의 폴리싱에 관한 연구 = Study on polishing of ultra-clean inner surface using magnetic forcelink 허강운; Heo, Gang-Woon; et al, 한국과학기술원, 2000 |
20999 | 자료기지 관리체계를 위한 선별 재수행 회복 기법 : ARIES/SR = Selective redo recovery scheme for database management system : ARIES/SRlink 이상희; Lee, Sang-Hee; et al, 한국과학기술원, 1995 |
21000 | 자료기지체계를 위한 하향판독/비상향기록의 다단계보안 동시성제어 = Multi-level secure concurrency control using read-down/no-write-up in database systemslink 황재우; Hwang, Jae-Woo; et al, 한국과학기술원, 1995 |