Browse "ME-Conference Papers(학술회의논문)" by Type Article
Showing results 1 to 60 of 138
| 3차원 박판금속 성형해석에서의 블랭크홀딩력 적용방법에 관한 연구 Choi, Tae Hoon; Huh, Hoon |
| Active Compliance Control for the Rehabilitation Robot with Cable Transmission Chang, Pyung H.; Kang, Sang-Hoon; Park, Hyung-Soon; Kim, Seong-Tae; Kim, Jong-Hyun, 2011-10-05 |
| An Adaptive Feedforward Controller for Periodic Disturbance rejection Park, YoungJin; Nah, Heeseung, Journal of Sound and Vibration, Vol. 201, No. 4, pp. 427 - 435, 1997 |
| ANALYSIS OF ELASTO-PLASTIC STRESS WAVES BY A TIME-DISCONTINUOUS VARIATIONAL INTEGRATOR OF HAMILTONIAN Cho, Sang Soon; Huh, Hoon; Park, Kwang Chun, Modern Physics Letter B, Vol.22, No.31-32, pp.6249-6264, 2008 |
| Arbitrariness of asymmetric hat-type channel members in the axial crush Lim, Ji Ho; Kim, Jin Sung; Huh, Hoon; Kim, Jong Seub, Proceedings of AEPA 2004, pp.571~576, 2004, 2004 |
| Architectural Acoustics: Integration of Synthesis Techniques and ‘‘Acoustical’’ Music Kim, Y.-H., J. Acoust. Soc. Am, Vol. 108, No.5, Pt. 2 of 2, pp. 2568, 2000, 2000 |
| Bake Hardenability of Batch Annealed Steel Sheets with Prestrai Huh, H.; Whang, P. S., Proc. KSAE, Fall Conference, 1989 |
| Can a Time Invariant Input Shaping Technique Eliminate Residual Vibrations of LTV Systems? Park, Juyi; Chang, Pyung Hun; Lee, Eunjeong, Proceedings of the American Control Conference, 2002-05 |
| Characteristics of Carbon Nanoparticle Oxidation by NO2 Choo, Jung Bum; Kim, Jin Ho; Jung, Jae Hee; Kim, Sang Soo, 한국입자에어로졸학회 학술대회 논문집, pp.173-174, 2006-07 |
| Characteristics of particulate generated by dry laser stripping of positive photoresist on glass wafer 김, 진호; 김, 상수, 한국입자에어로졸학회 학술대회 논문집, pp.291-292, 2005-07 |
| Commandless Input Shaping Technique Chang, Pyung-Hun; Park, Juyi; Park, Joon-Young, Proceedings of the American Control Conference, 2001-06 |
| A Comparative Study of Finite Element Solutions of Solidification by Temperature Recovery Method Im, Y.-T.; Chen, Y.-H.; Lee, J. K.; Lee, Z.-H., Transactions of the American Foundrymen's Society, 1991 |
| Comparison of thermal characteristics of confined and unconfined impinging jets Kyo Sung, Choo; Sung Jin, Kim, International Journal of Heat and Mass Transfer, Volume 53, Issue 15-16, July 2010, Pages 3366-3371, 2010-03-31 |
| Condensational enlargement of carbon agglomerates 김, 학준; 김, 상수, 한국입자에어로졸학회 학술대회 논문집, pp.153-154, 2005-07 |
| Control Architecture Design for a Fire Searching Robot using Task Oriented Design Methodology Chang, Pyung-Hun; Kang, Young-Hwan; Cho, Gun Rae; Kim, Jong Hyun; Jin, Maolin; Lee, Jinoh; Jeong, Jae Won; et al, SCIE-ICASE International Joint Conferance, pp.3126-3131, 2006-10 |
| Crash Analysis of Thin Shell Structures Considering the Strain Rate Hardening Effect Kang, W. J.; Huh, H., proc. KSME Fall Conference, pp.169~174, 1999 |
| CRASHWORTHINESS DESIGN OF THE SHEAR BOLTS FOR LIGHT COLLISION SAFETY DEVICES Kim, Jin Sung; Huh, Hoon; Kwon, Tae Soo, Modern Physics Letter B, 2008 |
| Design of the Cross Section Shape of an Aluminum Crash Box for Crashworthiness Enhancement of a Car Kim, S.B; Huh, H.; Lee, G.H.; Yoo, J.S.; Lee, M.Y., Modern Physics Letters B, 2008 |
| The Development of Anti-windup Scheme for Time Delay Control with Switching Action using Integral Sliding Surface Lee, Sung-Uk; Chang, Pyung Hun; Jung, Je Hyung, 2011-10-06 |
| Development of the technique for prediction of the hub-hole crack with the punching effect Lee, J. S.; Ko, Y. K.; Huh, H.; Kim, H. K.; Park, S. H., proc. KSTP Fall conference, pp.362~365, 2005 |
| Dimetyl Ether(DME)의 증발과 거시적 분무 특성 Yu, Jun; Lee, Jukwang; Bae, Choongsik, Transactions of the Korean Society of Automotive Engineers, Vol.11, No.3, pp.58-64, 2003 |
| Dynamic Characteristics of the Sinter-Forged Cu-Cr Alloys with the Variation of Chrome Content Song, Jung Han; Huh, Hoon, Solid State Phenomena Vols. 116-117 (2006) pp. 255-258, 2006-10-11 |
| Dynamic Formulations for Kinematically Redundant manpulators: a Comparative Study Chang, Pyung Hun; Park, Ki Cheol; Lee, Sukhan, International Workshop on Human-friendly Welfare Robotic Systems, 2000-01 |
| DYNAMIC MATERIAL PROPERTIES OF THE HEAT-AFFECTED ZONE (HAZ) IN RESISTANCE SPOT WELDING HA, JI-WOONG; SONG, JUNG-HAN; HUH, HOON; LIM, JI-HO; PARK, SUNG-HO, Modern Physics Letter B, 2008-06 |
| Dynamic Material Tests of Steel Sheets for an Auto-body Using the High Speed Material Testing Machine Lim, Jiho; Huh, Hoon, proc. KSAE Fall Conference, Vol.2, pp.1525~1530, 2003 |
| Dynamic Tensile Characteristics of TRIP-type and DP-type Sheets for an Auto-body Kim, Seok Bong; Huh, Hoon; Park, Sung Ho; Lim, Ji Ho, Key Engineering Materials Vols. 340-341 (2007) pp. 255-262, 2007-01-09 |
| Dynamic Tensile Tests of Auto-Body Steel Sheets with the Variation of Temperature Lee, Hee Jong; Song, Jung Han; Huh, Hoon, Solid State Phenomena Vols. 116-117 (2006) pp. 259-262, 2006-10-11 |
| Effect of Fuel Characteristics on the Thermal Processes in an Iron Ore Sintering Bed Yang, Won; Yang, Kwangheok; Choi, Sangmin, Jsme International Journal Series B, v.48, no.2, pp.316-321, 2005 |
| Effect of helicity on the buckling behavior of single-wall carbon nanotubes Huh, Jeehyang; Huh, Hoon, The 9th Asia-Pacific Conference on Engineering Plasticity and Its Applications, 2008 |
| EFFECT OF TENSILE SPEED ON THE FAILURE LOAD OF A SPOT WELD UNDER COMBINED LOADING CONDITIONS Song, Jung Han; Huh, Hoon, International Symposium on Impact Engineering, 2007 |
| EFFECTS OF LANDING GEAR NONLINEARITIES ON GROUND RESONANCE OF HELICOPTER Lee, Y.-K.; Kim, K.-J., The Fourteenth International Congress on Sound and Vibration (ICSV14), 2007 |
| ENERGY ABSORPTION OF EXPANSION TUBE CONSIDERING LOCAL BUCKLING CHARACTERISTICS Ahn, Kwang Hyun; Kim, Jin Sung; Huh, Hoon, Modern Physics Letter B, pp.621-627, 2008 |
| Evaluation of a Nanoparticle Generator for an Inhalation Toxicity Study of Silver Nanoparticle in SPF-SD Rats Jung, Jae Hee; Oh, Hyun Cheol; Ji, Jun Ho; Kim, Sang Soo; Yu, Je Ii, 한국입자에어로졸학회 학술대회 논문집, pp.243-244, 2006-07 |
| Evaluation of Collapse Characteristics with Respect to Aspect Ratio of Cross-Section for Thin-Walled Structures with Curved Shape Using Finite Element Limit Analysis Kim, K. P.; Kim, H. S.; Huh, H., Proc. KSAE, fall conference, pp.847~852, 2000 |
| Evaluation of Hole Flangeability of Steel Sheet with respect to the Hole Processing Condition Lee, Jong Sup; Ko, Yoon Ki; Huh, Hoon; Kim, Hong Ki; Park, Sung Ho, Key Engineering Materials Vols. 340-341 (2007) pp. 665-670, 2007-01-09 |
| Finite Element Analysis of Room Temperature Nanoimprint Lithography Process with Rate Dependent Plasticity Song, Jung Han; Huh, Hoon; Kim, Seung Ho; Hahn, T.H., Materials Science Forum Vols. 505-507 (2006) pp. 85-90, 2006 |
| Finite Element Analysis of the Hydro-Mechanical Punching Process Yoon, Jong Heon; Huh, Hoon; Kim, S.S.; Kim, E.J.; Park, H.J.; Tae, Hoon Choi; Lee, Hee Jong, Materials Science Forum Vols. 505-507 (2006) pp. 871-876, 2007-09-18 |
| Finite Element Stress Analysis of the Tire Contact Problem Huh, H.; Kwak, Y. K.; Han, Y. H.; Kim, Y. H.; 허, 훈; 곽, 윤근; 한, 영훈; et al, KSME, Fall Conference, 1988 |
| Flow and Combustion in a Four-Valve, Spark-Ignition Optical Engine Arcoumanis, C.; Bae, ChoongSik, SAE Transactions, Journal of Fuels and Lubricants, Vol.103, Sec 4, pp197-211, 1994-04 |
| FORCE-FEEDBACK DEVICE USING MAGNETORHEOLOGICAL FLUID : MR CLUTCH Park, Y.; Jung, B., New actuators; Actuator 2000 pp.543-546, 2000 |
| Formability of the Steel Sheet at the Intermediate Strain Rate Huh, Hoon; Kim, Seok Bong; Han, Soo Sik; Park, Sung Ho, Proceedings of AEPA 2004, pp.403~408, 2004, 2004 |
| Gasoline HCCI engine with DME (Di-methyl Ether) as an Ignition Promoter Yeom, Kitae; Jang, Jinyoung; Bae, Choongsik, 2011-07-12 |
| Gasoline HCCI Engine with DME as an Ignition Promoter Yeom, Kitae; Jang, Jinyoung; Bae, Choongsik, Proc. 6th International Conference on GDI Engines 'Direkteinspritzung im Ottomotor / Gasoline Direct Injection Engines', expert verlag, pp229-239, 2005-06 |
| High Speed Tensile Tests of Plastics at the Intermediate Strain Rate Lim, J. H.; Kim, S. B.; Kim, J. S.; Huh, H.; Lee, K. W., proc. KSAE, Fall Conference, pp.1390-1395, 2004 |
| Identificatoin of Dynamic Behavior of Sheet Metals for an Auto-body with Tension Split Hopkinson Bar Kang, Woo Jong; Cho, Sang Soon; Chung, D. T., 1998 SAE Int. Congress, Detroit, U.S.A., pp.115~120, 1998., 1998-02-23 |
| Impact Simulation of Auto-body Structures With an Elasto-Plastic Explicit Finite Element Method Huh, Hoon; Kang, Woo Jong, Plasticity, pp.567~569, 2000 |
| Improved Phase Unwrapping of Shift Interferometer Using Precision XY-scanner Park, Sung Lim; Gweon, Dae Gab; Moon, Kee S., International Conference on Optical Engineering for Sensing and Nanotechnology, 1999-06 |
| Improvement of DME HCCI Engine Performance by Fuel Injection Strategies and EGR Jang, Jinyoung; Yang, Kiseon; Yeom, Kitae; Bae, Choongsik; Oh, Seungmook; Kang, Kernyong, SAE International Powertrains, Fuels & Lubricants Congress, 2008-06 |
| The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions Kook, Sanghoon; Bae, Choongsik; Miles, Paul C; Choi, Dae; Pickett, Lyle M, SAE 2005 Powertrain & Fluid Systems Conference, San Antonio, 2005. 10, 2005-10 |
| Modal Analysis of Rotor System Using Modulated Co-ordinates for Asymmetric Rotor System with Anisotropic Stator Lee, C. W.; Suh, J. H.; Hong, S. W., 8th International Conference on Vibrations in Rotating Machinery, University of Swansea, UK, p575~584, 2004, 2004 |
| A New Stability Analysis of Time Delay Control for Input/Output Linearizable Plants Jung, Je Hyung; Chang, Pyung-Hun; Kwon, Oh-Seok, Proceedings of American Control Conference, 2004-07 |
| Optimum design of trimming line by one-step analysis for auto body parts Bao, Yi Dong; Huh, Hoon, Advanced forming and die manufacturing technology; AFDM 2006, pp.108–112, 2007-06-12 |
| Performance evaluation of long differential mobility analyzer (LDMA) in measurements of nanoparticles Song, Dong Keun; Lee, Hye Moon; Chang, Hyuk Sang; Kim, Sang Soo; Manabu, Shimada; Kikuo, Okuyama, 한국입자에어로졸학회 학술대회 논문집, pp.95-96, 2005-07 |
| Phase-insensitive Optical Coherence Angiography Hong, Youngjoo; Makita, Shuich; Yamanari, Masahiro; Miura, Masahiro; Kim, Soohyun; Yataga, Toyohiko; Yasuno, Yoshiaki, Ophthalmic technologies, pp.64260A-, 2007 |
| Prediction of fracture in a hub-hole expansion with a defected-edge model Lee, J. S.; Huh, H., proc. KSTP, pp.131~134, 2004 |
| Prediction of fracture in hub hole expansion process using ductile fracture criteria Ko, Y. K.; Lee, J. S.; Huh, H.; Kim, H. K.; Park, S. H., proc. KSTP, pp.160-163, 2004 |
| Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion , Proceedings of International Conference on Advanced Forming and Die Manufacturing Technology, Busan, September 2006, 2007-06-12 |
| Preform design for powdered magnet sinter-forging process with curved shape Seung Ho, Kim; Choong Ho, Lee; Hoon, Huh; Gil Su, Ahn; Chi Yong, Song, Proc. KSTP, Fall Conference, pp.144~147, 1998., 1998 |
| Purification of Carbon Nanotube through Electric Field near the Microelectrode Shim, H.C.; Lee, H.W.; Yeom, S.J.; Kwak, Y.K.; Lee, S.S.; Kim, S.H., Journal of Physics: Conference Series 61 (2007) 1061–1065, 2006 |
| Purification of Carbon Nanotubes through an Electric Field near a Microelectrode Shim, H.C.; Lee, H.W.; Yeom, S.J.; Kwak, Y.K.; Lee, S.S.; Kim, S.H., Journal of Physics: Conference Series 61 (2007) 1061–1065, 2007 |
Discover
Type
- 138 Article
- 1 Book
- 15,772 Conference
- 11 Presentation
- 1 Thesis
Date issued
- 1,998 2020 - 2024
- 5,805 2010 - 2019
- 5,182 2000 - 2009
- 2,464 1990 - 1999
- 454 1980 - 1989