3301 | 좁아지는 관내에서의 화염의 전파 = Flame propagation in a converging tubelink 정상훈; Jung, Sang-Hun; et al, 한국과학기술원, 2002 |
3302 | 좁은 간격 디스크 버너를 이용한 정적 조건의 메탄과 프로판 예혼합 화염 전파 특성 실험 및 해석 = Propagation of methane and propane premixed flames in a narrow-gap-disk-burner of constant-volumelink 이상민; 김남일; et al, 한국과학기술원, 2020 |
3303 | 종이 방사체를 통한 응결 기반 무펌프 방식의 물 정전분무 = Condensation based pumpless water electrospray by the paper emitterlink 최형수; 이승섭; et al, 한국과학기술원, 2020 |
3304 | 종이를 기반으로 한 접을 수 있는 은 나노와이어 스피커 = Foldable Ag nanowires loudspeaker on paperlink 김현석; Kim, Hyun-Seok; et al, 한국과학기술원, 2014 |
3305 | 종이에 연필로 필기 시 발생하는 음향 및 진동에 관한 연구 = A study on the generation of sound and vibration in pencil writing on the paperlink 김다영; Kim, Da-Young; et al, 한국과학기술원, 2015 |
3306 | 좌표변화기를 가진 2차원 광학 위치 근접센서에 관한 연구 = A study on the two dimensional rotation-freeoptical proximity sensorlink 제우성; Che, Woo-Seong; et al, 한국과학기술원, 1989 |
3307 | 주기적 열원을 갖는 전도층과 자연대류의 복합열전달 = Conjugate heat transfer of natural convection and thermal conduction with periodic embedded heat sourceslink 천일호; Chun, Il-Ho; et al, 한국과학기술원, 1987 |
3308 | 주기적으로 반복되는 Rib이 놓여 있는 2차원 난류 유동에 대한 수치적 해석 열전달 해석 = Analysis of S-D turbulent channel flow and heat transfer with periodic ribs on a principal walllink 서범수; Seo, Beom-Soo; et al, 한국과학기술원, 1996 |
3309 | 주기적으로 회전하는 원봉 주위의 후류에 관한 수치적 연구 = A numerical study of wakes around a circular cylinder with rotary oscillationlink 백승진; Baek, Seung-Jin; 성형진; 김문언; et al, 한국과학기술원, 1997 |
3310 | 주기적인 가진을 받는 동축원형제트의 농도특성에 관한 실험적 연구 = An experimental study on the concentration characteristics of the coaxial jet with acoustic excitationlink 이춘범; Lee, Choon-Beom; et al, 한국과학기술원, 1989 |
3311 | 주기적인 가진을 받는 원형제트의 유동특성에 관한 기초적 연구 = A fundamental study on the flow characteristics of a round jet with periodic excitationlink 김명배; Kim, Myung-Bae; et al, 한국과학기술원, 1989 |
3312 | 주기적인 흡입/분사가 난류경계층에 미치는 영향 = Influence of periodic suction/blowing on a turbulent boundary layerlink 박영수; Park, Young-Soo; et al, 한국과학기술원, 2001 |
3313 | 주사터널링 현미경과 고배율 광학현미경의 복합응용 시스템 개발 = A surface profile measurement system using scanning tunneling microscope combined with optical microscopelink 손양현; Sohn, Yang-Hyun; et al, 한국과학기술원, 1994 |
3314 | 주성분 분석법을 이용한 머리전달함수의 3차원적 분석 = Three-dimensional analysis of head-related impulse responses based on principal components analysislink 손대혁; Son, Dae-Hyuk; 박윤식; Park, Youn-Sik; et al, 한국과학기술원, 2013 |
3315 | 주유동에 수직으로 분사된 연료 젯트의 혼합구조에 관한 실험적 연구 = An experimental study of mixing structure in a jet with a crossflowlink 한형관; Han, Hyoung-Kwan; et al, 한국과학기술원, 1990 |
3316 | 주조공정해석을 위한 유한요소 및 사용자 인터페이스 프로그램 개발에 관한 연구 = A study on development of finite element and user interface program for analysis of casting processlink 김종민; Kim, Jong-Min; et al, 한국과학기술원, 1992 |
3317 | 주택난방의 열효율에 관한 연구 = A study on the thermal efficiency of the house heating systemlink 강신형; Kang, Shin-Hyoung; et al, 한국과학기술원, 1975 |
3318 | 주퇴복좌시스템에 관한 연구 = Study on a coneentric-hydro-spring type recoil systemlink 이동호; Lee, Dong-Ho; et al, 한국과학기술원, 1975 |
3319 | 주파수 영역에서 음파분리법에 의한 덕트소음의 능동소음제어 = Active noise control for a duct using wave decomposition technique in frequency domainlink 김재권; Kim, Jae-Kwon; et al, 한국과학기술원, 1994 |
3320 | 주파수가 선형적으로 변하는 조화 입력에 대한 복소 최소 자승 오차법의 추종 특성 = Tracking characteristics of complex least mean square algorithm for harmonic input with linearly changing frequencylink 배상준; Pae, Sang-Joon; et al, 한국과학기술원, 1997 |
3321 | 주파수응답함수 결합법을 이용한 자동차 핸들의 진동저감 설계 = Design to reduce steering wheel vibration using FRF synthesis methodlink 변성준; Byun, Sung-Joon; et al, 한국과학기술원, 2001 |
3322 | 주파수응답행렬의 특이치 분리를 이용한 다중 입력 규명시의 센서 위치 선정 기법 = Sensor placement technique to identify multiple input forces using singular value decomposition of frequency response matrixlink 박남규; Park, Nam-Gyu; et al, 한국과학기술원, 1997 |
3323 | 주파수합성을 이용한 정전용량형 gap 센서에 관한 연구 = A study on capacitance type gap sensor using frequency mixinglink 박남수; Park, Nam-Su; et al, 한국과학기술원, 1996 |
3324 | 주행 로봇을 위한 모터의 임피던스 변화를 이용한 지면 인식 = Floor type identification method for mobile robot using motor impedance variationlink 이응창; Lee, Eung-Chang; et al, 한국과학기술원, 2009 |
3325 | 주행로봇에 의한 험지의 최대마찰계수 추정 = Estimation of the maximum friction coefficient of the rough terrain by mobile robotslink 강현석; Kang, Hyun-Suk; et al, 한국과학기술원, 2008 |
3326 | 주행로봇의 웹 기반 3차원 모니터링 시스템에 관한 연구 = Web-based 3 dimensional monitoring system for mobile robotlink 이연백; Lee, Youn-Baek; 곽윤근; 김수현; et al, 한국과학기술원, 2003 |
3327 | 죽상 동맥경화의 진단을 위한 카테터 기반 OCT/FLIM 시스템 개발 = Development of catheter based OCT/FLIM system for diagnosis of atherosclerosislink 강우재; 오왕열; et al, 한국과학기술원, 2017 |
3328 | 준고속 변형률 속도에서의 인장실험 및 유한요소법을 이용한 박판 인장시편의 형상결정 = Tension test and specimen design with the finite element method at intermediate strain rateslink 송정한; Song, Jeong-Han; et al, 한국과학기술원, 2002 |
3329 | 준정적인 집중하중을 받는 판유리 및 벌브유리의 파괴에 대한 연구 = A study on fracture of plate and bulb glasses under quasi-static concentrated loadinglink 신운서; Shin, Woon-Seo; et al, 한국과학기술원, 1994 |
3330 | 중 변형률속도 0.1/s ~ 50/s 영역에서의 차체 강판의 인장/압축 경화 거동에 관한 연구 = Tension/compression hardening behavior of auto-body steel sheets at intermediate strain rates ranging from 0.1/s to 50/slink 주근수; Joo, Geun-Su; et al, 한국과학기술원, 2014 |
3331 | 중립 스키마를 활용한 PLM과 MES 간 3D 형상 및 mBOM의 교환 = Exchange of 3D shape and mBOM between PLM and MES using a neutral schemalink 남웅식; 한순흥; et al, 한국과학기술원, 2018 |
3332 | 중립 포맷을 이용한 서로 다른 플랜트 CAD간 배관조립정보 변환 : PDMS to S3D = Translation of piping assembly information between different plant CADs using a neutral format : PDMS to S3Dlink 김유빈; 한순흥; et al, 한국과학기술원, 2018 |
3333 | 중소형 CIM을 위한 공구관리 시스템의 개발에 관한 연구 : 금형공장의 사례중심 = A study on the developement of tool management system for small & medium size CIM : mainly on mold industrylink 정태성; Jung, Tae-Sung; et al, 한국과학기술원, 1998 |
3334 | 중첩된 박판간의 결합을 위한 접착-성형공정에 관한 연구 = Investigation into a new form-joining process with the aid of adhesive for joining of a sheet metal pairlink 정창균; Jeong, Chang-Gyun; et al, 한국과학기술원, 2003 |
3335 | 증기형 용질성 마랑고니 효과를 이용한 미소액적 내 유동 제어 방법 = Flow control method using vapor-driven solutal marangoni effects for sessile droplet microfluidicslink 박종혁; 김형수; et al, 한국과학기술원, 2020 |
3336 | 증발부 가열방식이 수평 진동형 히트파이프의 열적 거동에 미치는 영향에 관한 실험적 연구 = Effect of heating pattern in evaporator section on thermal behavior of horizontal pulsating heat pipes : an experimental studylink 이재민; Lee, Jaemin; et al, 한국과학기술원, 2016 |
3337 | 증발현상을 수반하는 분무 액적의 거동에 관한 연구 = Numerical study of behaviors of evaporating spray dropslink 최상균; Choi, Sang-Kyun; et al, 한국과학기술원, 1990 |
3338 | 지게차의 유압회로 해석 및 하강 조절 밸브의 동특성 연구 = An analysis and design of FD 50 M fortlift and the dynamic characteristics of down control valve on hunting phenomenon in the lift cylinderlink 이동음; Lee, Dong-Eum; et al, 한국과학기술원, 1980 |
3339 | 지능형 타이어와 차량 동역학을 활용한 사이드 슬립 앵글 및 코너링 강성계수 추정 = Side slip angle and cornering stiffness estimation using intelligent tire and vehicle dynamicslink 김승택; 최세범; et al, 한국과학기술원, 2021 |
3340 | 지능형구조물에서 삽입된 광섬유가 기지균열간격에 미치는 영향 = Effect of embedded optical fibers on matrix crack spacing in smart structureslink 서대철; Seo, Dae-Cheol; et al, 한국과학기술원, 1995 |
3341 | 지능화탄에 대한 MEMS 관성 스위치 = A novel MEMS inertial switch for smart munitionslink 조익천; Cho, Ik-Cheon; et al, 한국과학기술원, 2010 |
3342 | 지면 반력을 이용한 상체 앉은 자세 유추 = Estimation of upper-body sitting posture based on ground reaction forcelink 최협; Choi, Hyeob; et al, 한국과학기술원, 2014 |
3343 | 지식 기반 시스템을 이용한 플라이 휘일의 설계 보조 소프트웨어 개발에 관한 연구 = A study for the development of flywheel design aid software using knowledge based systemlink 김혁; Kim, Hyuk; et al, 한국과학기술원, 1990 |
3344 | 지식처리 시스템을 이용한 평면 4절 링크기구의 개념 설계및 상세 설계에 관한 연구 = A study for conceptual and detailed design of planar 4-bar linkage mechanism using knowledge-based systemlink 이성배; Lee, Sung-Bae; et al, 한국과학기술원, 1988 |
3345 | 지식처리 시스템을 이용한 평면 4절링크기구의 원형설계를 위한 연구 = A study for prototype design of planar 4-bar linkage mechanism using knowledge based systemlink 이황진; Lee, Hwang-Jin; et al, 한국과학기술원, 1987 |
3346 | 지자기 센서 및 GPS를 이용한 효율적 차량 자세 추정 방법 = Cost-effective vehicle attitudes estimation by using magnetometer and GPSlink 황윤진; Hwang, Yoonjin; et al, 한국과학기술원, 2015 |
3347 | 지정된 주파수 들에서 효율의 최대화를 위한 직렬 배열 혼의 최적 설계 = Optimal design of serially connected horns for maximizing the efficiency at specified frequencieslink 허용호; Heo, Yong-Ho; et al, 한국과학기술원, 2010 |
3348 | 지지기반의 랜덤한 운동에 대한 보의 응답 = Response of beam to random boundary excitationlink 문원규; Moon, Won-Kyu; et al, 한국과학기술원, 1986 |
3349 | 직각 형상의 금형을 통한 전방 압출 공정의 유체 역학적 모형 = A hydrodynamic model of plane strain forward extrusion through square dielink 황선; Hwang, Seon; et al, 한국과학기술원, 1981 |
3350 | 직교 이방성 복합재료의 Bolted Joint 유한 요소 응력 해석 = A stress analysis of bolted joint in composite material by finite element methodlink 한영명; Han, Young-Myong; et al, 한국과학기술원, 1981 |
3351 | 직교류에서 에멀젼 제트 경로 분석과 폐회로 풍동의 설계 특성 = Trajectory of an emulsion Jet in a crossflow and design characteristics of a closed return wind tunnellink 박성모; 김남일; et al, 한국과학기술원, 2020 |
3352 | 직교이방성 복합적층판 단면에서 계면과 경사진 균열의 해석 = Analysis of slant cracks on the cross section of orthotropic composite laminatelink 변창식; Byean, Chang-Sik; 임세영; 이정주; et al, 한국과학기술원, 1995 |
3353 | 직류 전기장 자극 평가를 위한 생체 외 신경 모델 = in vitro neuronal model for assessment of dcEF stimulationlink 고은민; 신현정; et al, 한국과학기술원, 2018 |
3354 | 직선 불변량과 색인 논리 필터를 이용한 평면 물체 인식 = Planar object recognition using line invariants and indexing logic filterlink 정문호; Jeong, Mun-Ho; et al, 한국과학기술원, 1996 |
3355 | 직접 방사형 스피커의 비선형 고조파 왜곡 보상 제어기의 설계 = Nonlinearity compensation of direct radiation loudspeaker for the reduction of harmonic distortionlink 김윤선; Kim, Yoon-Sun; et al, 한국과학기술원, 1997 |
3356 | 직접 방사형 스피커의 비선형 고조파 왜곡에 관한 연구 = A study on the nonlinear harmonic distortion of direct-radiator loudspeakerslink 정혁; Chung, Hyuk; et al, 한국과학기술원, 1993 |
3357 | 직접분사식 전기점화 엔진에서 LPG 희박 성층연소의 부하 영역 확장을 위한 n-butane과 가솔린의 분무 및 연소 특성 비교 = Spray and combustion characteristics of n-butane and gasoline for load range expansion of LPG lean stratified combustion in DISI enginelink 박상재; Park, Sangjae; et al, 한국과학기술원, 2016 |
3358 | 직접접촉식에 의한 보일러 폐열회수의 최적화 = Optimization of boiler heat recovery system using direct contact methodlink 박영재; Park, Young-Jae; et al, 한국과학기술원, 1988 |
3359 | 직진도 개선을 위한 엔드 밀링머시인의 온라인 제어 = On-line control to improve machining straightness in end-milling processlink 류지선; Lyu, Jee-Seon; 이종원; 박윤식; et al, 한국과학기술원, 1986 |
3360 | 진공 유리 중심부에서의 열전달 및 응력분포에 대한 연구 = Study on heat transfer and stress distribution in the central part of vacuum glazinglink 손홍익; 송태호; et al, 한국과학기술원, 2018 |