2881 | 유한요소 극한해석을 이용한 축대칭 압력용기의 하중지지능력 해석 = Load-carrying capacity of axisymmetric pressure vessels using finite element limit analysislink 김현섭; Kim, Hyen-Sup; et al, 한국과학기술원, 1995 |
2882 | 유한요소 역 해석을 이용한 축대칭 다단계 박판성형에서의 공정변수 설계에 관한 연구 = Design of process parameters in axisymmetric multi-step deep drawing by a finite element inverse methodlink 조천수; Cho, Cheon-Soo; 이대길; 허훈; et al, 한국과학기술원, 1997 |
2883 | 유한요소 접촉 해석법에 의한 나사 체결부 설계 개선에 관한 연구 = A parametric study of bolt-nut joints by the method of finite element contact analysislink 김영곤; Kim, Young-Gon; et al, 한국과학기술원, 1989 |
2884 | 유한요소를 이용한 유연성 간극기구의 동적해석 = Dynamic analysis of flexible mechanisms with clearances using finite elementslink 길계환; Kil, Kae-Hwan; et al, 한국과학기술원, 1988 |
2885 | 유한요소법과 광탄성 실험을 이용한 Hatch corner 의 응력 집중 현상에 관한 연구 = A study on stress concentration of hatch corners by finite element method and photoelastic experimentlink 김건; Kim, Gun; et al, 한국과학기술원, 1985 |
2886 | 유한요소법과 다구찌 방법을 이용한 Al 7001 T9 파이프의 롤러교정 공정 최적화 = Optimization of the roller levelling process for al 7001 T9 pipes with finite element method and taguchi methodlink 허진혁; Heo, Jin-Hyuck; et al, 한국과학기술원, 2002 |
2887 | 유한요소법에 대한 교육용 프로그램의 개발 = Development of a teaching program for finite element methodlink 신응수; Shin, Eung-Soo; et al, 한국과학기술원, 1984 |
2888 | 유한요소법에 의한 FRP 구조물의 응력해석 = The stress analysis of fiber-reinforced plastic structures by finite element methodlink 배동우; Pai, Dong-Woo; et al, 한국과학기술원, 1976 |
2889 | 유한요소법에 의한 골프 공의 충격 시 스핀 메커니즘 해석 = Analysis of golf ball spin mechanism at impact by FEMlink 노우진; Roh, Woo-Jin; et al, 한국과학기술원, 2007 |
2890 | 유한요소법에 의한 소규모 항복 조건하에서의 균열 성장에 관한 연구 = A study on crack growth under small scale yielding conditions by finite element methodlink 정진오; Jeong, Jin-O; et al, 한국과학기술원, 1983 |
2891 | 유한요소법에 의한 재료비선형 구조물의 정적, 동적 해석 = Analysis of static and dynamic response of material nonlinear structures by finite element methodlink 최연선; Choi, Yeon-Sun; et al, 한국과학기술원, 1978 |
2892 | 유한요소법에의한치차의응력해석 = Stress analysis of gear by finite element methodlink 조진; Cho, Jin; et al, 한국과학기술원, 1975 |
2893 | 유한요소법을 사용한 보강된 풍차날개에 대한 응력해석 = Stress analysis of a reinforced windmill propeller using finite element methodlink 최동훈; Choi, Dong-Hoon; 이병호; 이정오; et al, 한국과학기술원, 1977 |
2894 | 유한요소법을 이용한 web frame 구조의 최적설계 = Optimal design of web frame structure by finite element methodlink 김용대; Kim, Yong-Dae; et al, 한국과학기술원, 1986 |
2895 | 유한요소법을 이용한 냉장고내의 2차원 혼합대류의 수치해석에 관한 연구 = Finite element analysis of two-demensional mixed convection in a refrigeratorlink 심은보; Sim, Eun-Bo; et al, 한국과학기술원, 1989 |
2896 | 유한요소법을 이용한 녹내장 관련 시신경의 다중스케일 해석 = Multiscale finite element analysis of optic nerve head in relation to glaucomalink 김진수; 임세영; et al, 한국과학기술원, 2017 |
2897 | 유한요소법을 이용한 대전류 시스템의 전열해석 = Electrothermal analysis of large electric current systems by finite element methodlink 강우종; Kang, Woo-Jong; et al, 한국과학기술원, 1996 |
2898 | 유한요소법을 이용한 안정 및 불안정 균열성장에 대한 연구 = A study on stable and unstable crack growth using finite element methodlink 이형연; Lee, Hyeong-Yeon; 엄윤용; 윤용산; et al, 한국과학기술원, 1986 |
2899 | 유한요소법을 이용한 유연한 벨트구동계의 동적해석 = Dynamic analysis of flexible belt transmissions using finite element methodlink 류재욱; Ryou, Jae-Wook; et al, 한국과학기술원, 1992 |
2900 | 유한요소법을 이용한 응력상태에 따른 피로 균열 닫힘 거동의 비교 연구 = Comparison of fatigue crack closure behavior between plane strain and plane stress states by finite element analysislink 박정민; Park, Jung-Min; et al, 한국과학기술원, 2002 |
2901 | 유한요소법을 이용한 축대칭 전방압출의 연구 = Finite element analysis of axisymmetric forward extrusionlink 오병수; Oh, Byung-Soo; 양동열; 이종홍; et al, 한국과학기술원, 1984 |
2902 | 유한요소법을 이용한 평면 방향으로의 사출성형 해석 = Numerical analysis of injection molding processing in plane direction using a finite element methodlink 정준호; Jeong, Jun-Ho; et al, 한국과학기술원, 1993 |
2903 | 유한요소법을 이용한 피로균열 닫힘거동 해석에서의 최적요소크기에 관한 연구 = A study on optimum element size for the simulation of fatigue crack closure behaviour by finite element methodlink 이창환; Lee, Chang-Hwan; et al, 한국과학기술원, 1996 |
2904 | 유한요소법을 이용한 형상기억합금 작동기의 3차원 거동 해석 = 3-dimensional behavoior analysis of shape memory alloy actcuator using finite element methodlink 김영진; Kim, Young-Jin; et al, 한국과학기술원, 2007 |
2905 | 유한요소해석과 다구치방법을 이용한 에너지 저장형 의족의 설계에 대한 연구 = A study on the design of energy storing prosthetic foot for the below-knee amputee using the finite element analysis and the Taguchi methodlink 이동희; Lee, Dong-Hee; et al, 한국과학기술원, 1999 |
2906 | 유한차분에 근거한 탄성구와 타원체형 쉘간의 저속도 충돌해석 = Finite difference analysis of low volocity impact on an ellipsoidal shell by an elastic balllink 최용기; Choi, Yong-Kie; et al, 한국과학기술원, 1993 |
2907 | 유한한 두께의 벽을 가지는 용기내의 과도자연대류 = Transient natural convection in a cavity of finite wall thicknesslink 정광효; Chung, Kwang-Hyo; et al, 한국과학기술원, 1997 |
2908 | 육면체 형태의 모서리 기반 완화 유한요소에 관한 연구 = A study on edge-based smoothed finite elements of hexahedral shapelink 김호범; Kim, Ho-Beom; et al, 한국과학기술원, 2014 |
2909 | 육면체요소를 사용한 삼차원 유한요소모델 단면에 대한 응력선도 프로그램 개발 = A stress contour display program for cross sections of three-dimensional finite element models in curved brick elementslink 박기욱; Park, Ki-Ook; et al, 한국과학기술원, 1985 |
2910 | 윤곽오차를 줄이기 위한 CNC 서보 제어에 관한 연구 = A study on CNC servo control for reducing the contour errorlink 정경석; Jeong, Kyeong-Seok; et al, 한국과학기술원, 2004 |
2911 | 은 나노와이어의 표면 에칭이 암모니아 가스와의 반응에 미치는 영향에 관한 연구 = Effect on response to ammonia gas by etching the surface of a single Ag nanowirelink 권지훈; Kwon, Ji-Hoon; et al, 한국과학기술원, 2011 |
2912 | 음선 추적에 의한 곡보의 고주파수 진동 해석에 관한 연구 = A study on the high frequency vibration analysis of curved beam structures by using the ray tracing methodlink 정철호; Jeong, Cheol-Ho; et al, 한국과학기술원, 2002 |
2913 | 음성 명료도의 개선을 위한 실내 공간의 흡음 기준 = Design criterion of sound absorption in a room for enhancing the speech intelligibilitylink 고병윤; 이정권; et al, 한국과학기술원, 2021 |
2914 | 음질을 고려한 소음원 파악에 관한 연구 = A study on the noise source identification considering the sound qualitylink 이승화; Yi, Seung-Hwa; et al, 한국과학기술원, 1998 |
2915 | 음파 가진이 있는 원형 분류 확산 화염에 관한 실험적 연구 = An experimental study on tone excietd [실제는 excited] jet diffusion flamelink 박정; Park, Jeong; et al, 한국과학기술원, 1990 |
2916 | 음파가 입사하는 방향을 영역 개념을 이용하여 추정하는 방법 = An estimation of incident wave direction by applying regional conceptlink 이태웅; Lee, Tae-Woong; et al, 한국과학기술원, 2011 |
2917 | 음파를 이용한 덕트 내 불균일 단면적 측정에 관한 연구 = A study on the acoustical measurement method of sectional area in nonuniform ductslink 김회전; Kim, Hoi-Jeon; 박영진; 이정권; et al, 한국과학기술원, 2000 |
2918 | 음파의 섭동에 의한 난류 재순환 유동의 제어 = Control of turbulent recirculating flows by acoustic perturbationlink 전경빈; Chun, Kyung-Bin; et al, 한국과학기술원, 1992 |
2919 | 음향 계의 해석을 위한 시간영역 경계요소법에 관한 연구 = A study on the time domain boundary element method for the analysis of acoustical systemslink 장해원; Jang, Hae-Won; et al, 한국과학기술원, 2006 |
2920 | 음향 광학 편향기와 슬릿을 이용한 반사형 공초점 주사 현미경의 설계와 성능에 관한 연구 = Design and performance evaluation of reflection confocal scanning microscope using acousto-optic deflector and slitlink 이승우; Lee, Seung-Woo; et al, 한국과학기술원, 2003 |
2921 | 음향 문제의 해를 구하기 위한 유한 차분 시간 영역법의음원과 경계조건의 모델링에 관한 연구 = A study on the source and boundary modeling in the finite difference Time domain method for solving acoustic problemslink 고희연; Koh, Hee-yuen; et al, 한국과학기술원, 2008 |
2922 | 음향 신호를 이용한 3차원 위치 추정 시스템의 개발 = 3D position sensing system based on acoustic signalslink 김흥기; Kim, Heung-Gi; et al, 한국과학기술원, 2003 |
2923 | 음향 홀로그래피를 이용한 방사 음장의 전방예측 = The forward prediction of radiation sound field using acoustic holographylink 권휴상; Kwon, Hyu-Sang; et al, 한국과학기술원, 1992 |
2924 | 음향 홀로그래피에서 파라미터들이 음장예측에 미치는 영향에 관한 연구 = Study on the effect of the parameters in the acoustic holographylink 김시문; Kim, See-Moon; et al, 한국과학기술원, 1994 |
2925 | 음향스캐너 보간 오차 개선을 위한 알고리즘 = An algorithm for reducing interpolation error of acoustic scannerlink 나세주; Na, Se-Joo; et al, 한국과학기술원, 2011 |
2926 | 음향의 충격 응답을 이용한 긴 관로 내의 누설의 위치 및 크기 추정 = Localization and size estimation of leaks in a long pipeline by using acoustic Impulse responselink 조용현; 이정권; et al, 한국과학기술원, 2018 |
2927 | 음향학적 상반성원리를 이용한 밀폐된 공간 내의 음장예측 = The prediction of acoustic field in enclosed space using the acoustic reciprocity principlelink 김봉기; Kim, Bong-Ki; et al, 한국과학기술원, 1992 |
2928 | 음향학적으로 밝은 공간 형성에 관한 연구 = A study on the generation of acoustically bright zonelink 최정우; Choi, Joung-Woo; et al, 한국과학기술원, 2001 |
2929 | 응력 집중을 최소화한 인공관절스템의 형상설계 = Optimal design of metal stem of hip prosthesis to minimize the stress concentrationlink 장건희; Jang, Gun-Hee; et al, 한국과학기술원, 1986 |
2930 | 응력동결법을 이용한 3차원 광탄성 실험에서의 균열물체의 응력확대계수의 결정 = Three-dimensional photoelastic determination of stress intensity factors for cracked bodies by stress-freezing methodlink 최현창; Choi, Hyeon-Chang; et al, 한국과학기술원, 1984 |
2931 | 응력회복 기능을 가진 효율적인 유한요소 후처리 프로그램의 개발 = Development of a finite element postprocessor with stress recoverylink 엄재성; Eom, Jae-Sung; et al, 한국과학기술원, 2000 |
2932 | 응축 기체 내에서 분무의 간섭시 액적 크기 분포의 변화에 관한 실험적 연구 = An experimental study on the change of drop size distribution with spray interaction in a condensable gaslink 한기수; Han, Ki-Soo; et al, 한국과학기술원, 1986 |
2933 | 응축 기체 내에서 분사되는 액체막의 분산현상에 관한 실험적 연구 = An experimental study on the breakup mechanism in a condensable gaslink 김인구; Kim, In-Goo; et al, 한국과학기술원, 1985 |
2934 | 응축 입자발생기의 설계 변수에 관한 실험적 연구 = An experimental study on the design variables of a homogeneous condensation particle generatorlink 김진호; Kim, Jin-Ho; et al, 한국과학기술원, 2000 |
2935 | 응축부 배치가 수평 진동형 히트 파이프의 열성능에 미치는 영향에 관한 실험적 연구 = Effect of condenser arrangement on thermal performance of horizontal pulsating heat pipes - An experimental Studylink 이선주; Lee, Sunjoo; et al, 한국과학기술원, 2016 |
2936 | 응축이 수반된 이차원 초음속 노즐 유동의 수치해석 = Numerical study of two-dimensional supersonic nozzle flow with condensationlink 오재준; Oh, Jae-Joon; et al, 한국과학기술원, 1989 |
2937 | 이광자 흡수 광환원 공정을 이용한 금속형상 정밀화 및 특성 향상에 관한 연구 = Investigation into two-photon induced photoreduction process for fabrication of ultra-precise metallic microstructureslink 손용; Son, Yong; et al, 한국과학기술원, 2008 |
2938 | 이단계 최적화 방법을 이용한 2차원 보구조의 최적설계 = Optimal design of two dimensional beam structures by the two-level optimization techniquelink 문성채; Moon, Sung-Chae; et al, 한국과학기술원, 1992 |
2939 | 이동 로보트의 개발 : 몸체부 및 제어부회로 설계제작에 관한 연구 = Development of a mobile robot : design and manufacture of main body and control circuitslink 홍대선; Hong, Dae-Sun; et al, 한국과학기술원, 1986 |
2940 | 이동 로보트의 동특성을 고려한 절대 위치 측정에 관한 연구 = Development of an optical absolute position sensor for an automated guided vehiclelink 이학영; Lee, Hak-Young; et al, 한국과학기술원, 1991 |