2701 | 압출공정의 금형과 보강링의 치수 최적설계 = Optimal design of dimensions of die and stress rings in extrusionlink 안성찬; An, Sung-Chan; et al, 한국과학기술원, 2000 |
2702 | 액체 스프레이 분사와 유동의 혼합에 관한 실험적 연구 = An experimental study on the mixing between liquid spary and gas flowlink 김영봉; Kim, Young-Bong; et al, 한국과학기술원, 2006 |
2703 | 액체분무의 증발 및 연소에 관한 수치적 연구 = A numerical study on evaporation and combustion of liquid spraylink 정인철; Jeong, In-Cheol; et al, 한국과학기술원, 1991 |
2704 | 액체의 점도와 분사압력이 액적 크기 분포의 균일도에 미치는 영향 = Effects of liquid viscosity and injection pressure on the uniformity of drop size distributionlink 조한권; Cho, Han-Gweon; et al, 한국과학기술원, 1989 |
2705 | 액체추진로켓의 포고현상 해석과 제어에 관한 연구 = A study on the analysis of pogo and its suppressionlink 장홍석; Chang, Hong-Suk; et al, 한국과학기술원, 2002 |
2706 | 액화 공기 에너지 저장 시스템을 위한 효율적인 냉열 저장소 개발 = Development of efficient cold storage for liquid air energy storage systemlink 김종권; 정상권; et al, 한국과학기술원, 2020 |
2707 | 얇은 막에 대한 열탄성 해석 = A thermo-elastic analysis of thin filmlink 김태완; Kim, Tae-Woan; et al, 한국과학기술원, 1989 |
2708 | 얇은 탄성쉘의 동특성 특정에 의한 결함의 탐지에 관한 연구 = A study on the fault identification with dynamic characteristics measurements of a thin shell structurelink 이인찬; Lee, In-Chan; et al, 한국과학기술원, 1988 |
2709 | 얇은 판에 수직으로 입사되는 자유 낙하 물방울에 의한 음향 방사 = Sound radiation from a thin plate by a normally impinging water drop in a free falllink 제병수; Je, Byoung-Soo; et al, 한국과학기술원, 2009 |
2710 | 얇은 환상 제트 및 동축 제트에 미치는 코안다 효과에 대한 실험적 고찰 = An experimental investigation of coanda effect on the annular jet and the coaxial jetlink 방세윤; Bang, Se-Yoon; et al, 한국과학기술원, 1983 |
2711 | 양극산화알루미늄 기판을 이용한 저전력, 고안정성 가스 센서 제작 = Anodic aluminum oxide-based gas sensor for low power consumption and high stabilitylink 이병주; 박인규; et al, 한국과학기술원, 2022 |
2712 | 양방향 원격조종 시스템에서 작업자 인과성에 관한 실험적 연구 = An experimental study on the operator causality in bilateral teleoperation systemlink 이동원; Lee, Dong-Won; et al, 한국과학기술원, 2004 |
2713 | 양산 차량 센서를 이용한 반 능동적 서스펜션 상대속도 추정 = Relative velocity estimation of semi-active suspension using production in-vehicle sensorslink 김병준; 최세범; et al, 한국과학기술원, 2020 |
2714 | 어긋난 배열을 갖는 Tube 집합체의 횡유동 관련 진동에 관한 실험적 연구 = An experimental study on crossflow induced vibration of staggered array tube bankslink 이진희; Lee, Jin-Hie; et al, 한국과학기술원, 1984 |
2715 | 엇물린 판상 적층 복합재의 기계적 성질 해석 및 3차원 프린터를 이용한 실험 = Mechanical analysis on staggered platelet composites and experiment using 3D printerlink 김영수; Kim, Young Soo; et al, 한국과학기술원, 2016 |
2716 | 에너지 효율적이고 서비스 용이하며 제조 친화적인 사족 보행 로봇의 설계 = Design of energy efficient, high serviceability and manufacturing friendly quadrupedal robotlink 박정수; Park, Jeongso; et al, 한국과학기술원, 2024 |
2717 | 에너지 효율적인 보행 로봇을 위한 구동기 설계 = Energy efficient actuator design for a legged robot systemlink 우상영; 박해원; et al, 한국과학기술원, 2022 |
2718 | 에어컨 실외기 열교환기 구조물의 굽힘 소성 가공 해석 및 설계 = Analysis and design of elastoplastic bending process for air conditioner outdoor unit heat exchangerslink 김문홍; Kim, Moon-Hong; et al, 한국과학기술원, 2013 |
2719 | 에어컨 실외기용 휜-관 직교형 열교환기의 열, 유동해석 및 휜 성능 개선에 대한 연구 = Flow and heat transfer analysis for the performance improvement of Cross-flow fin-tube heat exchangerslink 안진수; An, Cheen-Su; et al, 한국과학기술원, 2004 |
2720 | 엔진 마운트용 고무의 동역학적 모델링 = Dynamic modeling of rubber elements in engine mount systemlink 박석태; Park, Seok-Tae; 이종원; 김광준; et al, 한국과학기술원, 1986 |
2721 | 엔진 블럭의 가속도 신호에 의한 밸브의 충격신호 회복 = Valve impact signal identification using engine block acceleration measurementlink 이혁; Lee, Hyuk; et al, 한국과학기술원, 1991 |
2722 | 엔진 블럭의 진동 신호를 이용한 밸브 간극 진단 = Diagnosis of valve lash using engine block vibration signallink 석정호; Seok, Jeong-Ho; et al, 한국과학기술원, 1992 |
2723 | 엔진 진동 제어를 위한 전자석 구동기 설계 및 전류 신호를 이용한 제어 = Design of the current feedback electromagnetic actuator for engine vibration controllink 이보하; Lee, Bo-Ha; et al, 한국과학기술원, 2003 |
2724 | 엔진 흡기계 공기 여과기의 음향 특성에 관한 연구 = A study on the acoustical characteristics of the air filter in engine intake systemslink 강장훈; Kang, Jang-Hoon; et al, 한국과학기술원, 2006 |
2725 | 엔진 흡기계 소음원의 음향 변수 측정에 관한 연구 = A study on the measurement of acoustic parameters of the intake system of an internal combustion enginelink 조은수; Jo, Eun-Soo; et al, 한국과학기술원, 2005 |
2726 | 엔진냉각수, 윤활유 및 흡입공기온도의 자동조절 장치 개발과 각종 온도변화에 따른 엔진성능 측정실험에 관한 연구 = Fabrication of automatic engine temperature controls for coolant, lubricantand intake air, and experimental study on temperature effects on engine performancelink 조석구; Cho, Suk-Koo; et al, 한국과학기술원, 1987 |
2727 | 엔진마운트의 등가강성 모형화에 관한 연구 = A study on equivalent stiffness modeling of engine mountlink 정정교; Jeoung, Jeoung-Kyo; et al, 한국과학기술원, 1998 |
2728 | 엔진음 능동소음제어와 액티브사운드디자인의 통합 알고리즘 개발 = Integrated algorithm development with engine active noise control and active sound designlink 이학준; 박영진; et al, 한국과학기술원, 2019 |
2729 | 엘리베이터 도어 기구의 동역학적 시뮬레이션에 관한 연구 = A study on dynamic simulation of elevator door machinelink 김지웅; Kim, Chi-Ung; et al, 한국과학기술원, 1998 |
2730 | 엠보스를 이용한 동특성 변경 : 신경망과 모드 및 스트레인 에너지를 이용한 방법의 비교 연구 = Structural dynamics modification with embossing : a comparison study between neural network and modal dynamic strain energylink 김정욱; Kim, Chong-Uck; 박윤식; 박영진; et al, 한국과학기술원, 2004 |
2731 | 여러개의 액채분무간의 유동간섭현상에 관한 실험적 연구 = Experimental study on the flow interaction of multiple liquid sprayslink 정태식; Cheong, Tae-Sig; et al, 한국과학기술원, 1985 |
2732 | 여러장의 거리영상 정합에 의한 3차원 형상복원 = Reconstruction of 3-D shape by registration of multiple range imageslink 김영문; Kim, Young-Mun; et al, 한국과학기술원, 1996 |
2733 | 여유 자유도 로봇의 시간 최소 경로 설계 = Design of time optimal path of redundant manipulatorlink 이재원; Lee, Jae-Won; et al, 한국과학기술원, 1997 |
2734 | 여유 자유도를 가진 복강경 수술 로봇을 위한 조종기의 설계 = Design of a master system for laparoscopic surgery robot with redundant degree of freedomlink 김기영; Kim, Ki-Young; 윤용산; 이정주; et al, 한국과학기술원, 2005 |
2735 | 여유구동 폐루프형 로봇의 최적설계에 대한 연구 = Study on the optimal design of closed-loop typee robot with redundant actuationlink 이상헌; Lee, Sang-Heon; et al, 한국과학기술원, 1994 |
2736 | 여유자유도 로봇 매니퓰레이터의 위치/충돌/힘 제어에 관한 연구 = A study on position/impact/force control of redundant robot manipulatorslink 박기철; Park, Ki-Cheol; et al, 한국과학기술원, 1993 |
2737 | 여유자유도 로봇에 대한 J-Minor 성능지수의 제한궤적 특성 = Characteristic of constraint locus of J-Minor measure for kinematically redundant robotslink 이수진; Lee, Su-Jin; et al, 한국과학기술원, 1994 |
2738 | 역주파수응답행렬을 이용한 내부 공간의 구조 경계면상의 진동 및 음향원 규명 = Identification of vibro-acoustic sources on the boundary of enclosed spaces using the inverse frequency response matrixlink 전인열; Jeon, In-Youl; et al, 한국과학기술원, 1999 |
2739 | 역확산화염에서 부상 상태의 진동현상에 관한 연구 = The periodic motion of lifted flames in inverse coflow jetslink 원장혁; Won, Jang-Hyeok; et al, 한국과학기술원, 2007 |
2740 | 역확산화염에서 산소부화가 매연 영역 구조 및 초기 입자의 성숙도에 미치는 영향에 관한 연구 = Oxygen enrichment on soot zone structure and maturity of incipient particles in inverse diffusion flameslink 정용진; Jung, Yong-Jin; et al, 한국과학기술원, 2008 |
2741 | 연 X-선을 이용한 submicron 입자의 광하전 특성 및 그 응용 = Study on the characteristics of photoelectrical charging of submicron particles using soft X-ray and its applicationlink 한선우; Han, Sun-Woo; et al, 한국과학기술원, 2012 |
2742 | 연료 소비량을 최소화 하기 위한 엔진의 suboptimal control = Suboptimal control of engine for minimizing fuel consumptionlink 박형호; Park, Hyung-Ho; et al, 한국과학기술원, 1981 |
2743 | 연료전지 적용을 위한 수증기 개질기의 수치해석 연구 = Numerical investigation of steam reformer for fuel cellslink 박준근; Park, Joon-Guen; et al, 한국과학기술원, 2007 |
2744 | 연료전지와 납축전지를 이용한 외부충전방식 하이브리드 자동차의 운전전략에 관한 연구 = Study on operating strategies for fuel cell and lead-acid battery plug-in type hybrid vehiclelink 정재화; Jeong, Jae-hwa; et al, 한국과학기술원, 2008 |
2745 | 연료전지의 성능에 대한 맥동유동의 영향 = Effects of pulsating flow on the performance of PEM fuel celllink 장정봉; Chang, Cheong-Bong; et al, 한국과학기술원, 2009 |
2746 | 연삭 가공면의 표면조도와 형상정밀도의 비접촉식 인프로세스 측정기술 개발 = An in-process measurement technique for non-contact monitering of surface roughness and form accuracy of ground surfaceslink 임동열; Yim, Dong-Yeol; et al, 한국과학기술원, 1987 |
2747 | 연성 재료의 안정 균열 성장에 대한 연구 = A study on stable crack growth in ductile materiallink 문대흥; Moon, Dae-Heung; et al, 한국과학기술원, 1984 |
2748 | 연성된 경계 요소법을 이용한 부분 차음판의 음향 특성 예측 = Prediction of acoustic characteristics of partial enclosures by using coupled BEMlink 배정용; Bae, Jeong-Yong; et al, 한국과학기술원, 1993 |
2749 | 연성물질의 파괴 저항 곡선에 관한 연구 = A study on J-resistance curve for ductile materiallink 최영환; Choi, Young-Hwan; et al, 한국과학기술원, 1984 |
2750 | 연소 가스와 공기의 2차원 혼합층에서 난류혼합특성에 관한 실험적 연구 = An experimental study on the turbulent mixing characteristics in 2-dimensional mixing layer between burned gas and airlink 김흥덕; Kim, Heung-Duk; et al, 한국과학기술원, 1983 |
2751 | 연소 가스와 공기의 이차원 난류혼합경계층 내에서의 온도변동 특성에 관한 실험적 연구 = An experimental study on temperature fluctuation characteristics in two-dimensional turbulent mixing layer between burned gas and airlink 유영환; You, Young-Hwan; et al, 한국과학기술원, 1982 |
2752 | 연소 및 고체 화학 반응을 고려한 고체고온공정 모형 및 응용 = Analysis model and application of the solid pyro-process considering flame combustion and solid chemical reactionlink 최동환; 최상민; et al, 한국과학기술원, 2017 |
2753 | 연소가스속 증기의 응축이 부착율에 미치는 영향에 관한 실험적 연구 = An experimental study on vapor deposition rates in the presence of homogeneous condensation in combustion gaseslink 정해영; Jeong, Hai-Yeong; et al, 한국과학기술원, 1988 |
2754 | 연소중 미분탄에 대한 분광학적 연구 = Spectroscopic investigation of burning pulverized coal particleslink 황원호; Hwang, Won-Ho; et al, 한국과학기술원, 1992 |
2755 | 연속 레이저 흡수에 의한 증발제거 과정의 관련 인자 영향 고찰 = Effect of parameters in evaporative removal process by absorption of a CW laserlink 김진윤; Kim, Jin-Yoon; et al, 한국과학기술원, 1994 |
2756 | 연속 용융 아연도금 공정에서의 단부 과도금 현상에 대한 수치해석 = Numerical analysis of edge overcoating in continuous Hot-Dip galvanizinglink 안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2002 |
2757 | 연속 하이브리드 공정을 이용한 알루미늄 고강도 볼트 성형 = High strength bolt forming of fine grained aluminum alloylink 김지훈; Kim, Ji-Hun; et al, 한국과학기술원, 2012 |
2758 | 연속체 수정법에 의한 S.D.M. 신뢰성 개선에 대한 연구 = A study on improving S.D.M. results by introducing continuous modification techniquelink 양군호; Yang, Koon-Ho; et al, 한국과학기술원, 1987 |
2759 | 연주자를 위한 스테이지 인크로우져의 최적 설계 = Optimal design of stage enclosure for performerslink 이희원; Lee, Hee-Won; et al, 한국과학기술원, 1981 |
2760 | 연탄을 사용하는 온풍로에서의 열전달에 관한 연구 = A study on the heat transfer characteristics of a warm-air-furnace firing briquettelink 김재헌; Kim, Jae-Hun; et al, 한국과학기술원, 1977 |