Browse "ME-Theses_Ph.D.(박사논문) " by Title 

Showing results 1341 to 1360 of 1933

1341
물 유화 연료 단일 액적의 상태량 측정과 분열 및 점화 특성에 관한 실험적 연구 = (An) experimental study of properties, breakup and ignition behavior of single water-emulsified fuel dropletlink

장규민; 김남일; et al, 한국과학기술원, 2020

1342
물의 정전분무에 관한 실험적 연구: 분무 불안정과 액적 분열 특성 = Experimental study on water electrospray: Characteristics of jet instability and droplet generationlink

박인용; Park, Inyong; et al, 한국과학기술원, 2015

1343
물질좌표계를 이용한 비등방성 탄성재료의 재료거동 및 유한요소 해석에 관한 연구 = A study on the finite element analysis and the constitutive equation for anisotropic hyperelastic material using convected frameslink

박현철; Park, Hyun-Cheol; et al, 한국과학기술원, 2001

1344
미분탄의 가압 가스화 특성 연구 = A study on the characteristics of gasification of pulverized coal particles at elevated pressurelink

신용승; Shin, Yong-Seung; et al, 한국과학기술원, 2000

1345
미세 채널에서 혼합 냉매의 유동 비등 열전달에 관한 실험적 연구 = Experimental study on the flow boiling heat transfer of mixed refrigerant in a microchannellink

인세환; In, Se-Hwan; et al, 한국과학기술원, 2010

1346
미세수술을 위한 정밀 동작, 힘 측정이 가능한 로봇 수술도구 및 동력부 = A robotic surgical instrument and actuation pack for a precise motion and force-sensing of micosurgerylink

공덕유; 권동수; et al, 한국과학기술원, 2022

1347
미세조직 예측을 위한 결정소성 유한요소해석 및 셀룰라 오토마타 기반의 멀티스케일 전산모사 = Multi-scale simulation by crystal plasticity finite element method and cellular automata for prediction of microstructurelink

김동규; Kim, Dong-Kyu; et al, 한국과학기술원, 2014

1348
미소 농도구배에 따른 삼지화염의 부상특성에 관한 연구 = A Study on Lift-off Characteristics of Triple Flames with Infinitesimal Fuel Concentration Gradientslink

서정일; Seo, Jeong Il; et al, 한국과학기술원, 2008

1349
미소 힘 측정기구 설계 및 성능 평가 = Mechanism design and performance evaluation of micro force measurement systemlink

최인묵; Choi, In-Mook; et al, 한국과학기술원, 2002

1350
미소피로균열의 진전 및 닫힘 거동 = Crack growth and closure behavior of short fatigue crackslink

방종명; Pang, Chong-Myong; 엄윤용; 송지호; et al, 한국과학기술원, 1993

1351
밀폐형 2상 자연순환 회로 내의 유동 불안정 현상 분석 = Analysis of flow instabilities in closed two-phase natural circulation loopslink

김영률; Kim, Young-Lyoul; et al, 한국과학기술원, 1997

1352
바이올린 브릿지의 위상 최적설계 = Topology optimization of violin bridgelink

유용균; Yu, Yong-Gyun; et al, 한국과학기술원, 2010

1353
박리를 수반하는 익형주위의 점성유동해석 : 격자계 생성 및 난류모델에 관한 연구 = Viscous-flow analysis about the airfoil with separation : a study on grid generation and turbulence modellink

손창현; Sohn, Chang-Hyun; et al, 한국과학기술원, 1991

1354
박막 두께 형상 및 굴절률 측정용 분산 백색광 간섭법 = Dispersive white-light interferometry for measurements of thin-film thickness profile and refractive indexlink

김영식; Ghim, Young-Sik; et al, 한국과학기술원, 2007

1355
박막 초전형 적외선 감지소자의 제작과 실리콘 기판 두께 및 구성품의 배치에 따른 성능평가에 관한 연구 = Development of thin film pyroelectric sensors and their performance evaluation in terms of silicon substrate thickness and component layoutlink

고종수; Ko, Jong-Soo; et al, 한국과학기술원, 2000

1356
박막의 신뢰성 확보를 위한 고온 환경 하에서 기계적 거동 분석 및 피로 수명 평가 = Mechanical behavior and fatigue life evaluation under elevated temperature conditions for the reliability of thin filmslink

이용석; Lee, Yong-Seok; et al, 한국과학기술원, 2017

1357
박막의 실시간 타원계측을 위한 초점형 환상(環狀) 측정 방법에 대한 연구 = Peripheral measurement method for real-time ellipsometric data acquisition of thin filmslink

예상헌; Ye, Sang-Heon; et al, 한국과학기술원, 2008

1358
박판 형 부재의 굽힘 붕괴 형상 및 붕괴 후 거동 예측 = Collapse mode estimation and post-collapse analysis of thin-walled members under bendinglink

박문식; Park, Moon-Shik; et al, 한국과학기술원, 1994

1359
박판부재의 붕괴거동해석을 위한 극한해석의 쉘요소 수식화 = Shell element formulation for limit analysis of thin-walled structureslink

김현섭; Kim, Hyun-Sup; et al, 한국과학기술원, 2000

1360
박판성형 및 충돌성능 향상을 위한 고변형률속도에서의 차체강판 성형한계도 = Forming limit diagram of auto-body steel sheets at high strain rates for sheet metal forming and crashworthinesslink

김석봉; Kim, Seok Bong; et al, 한국과학기술원, 2010

rss_1.0 rss_2.0 atom_1.0