Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Type Thesis(Ph.D)

Showing results 421 to 480 of 2479

421
Design of air conveyor system with the air slit and the composite grooved surface = 공기 슬릿 및 복합재료 요철 면을 이용한 공기 부상 컨베이어 시스템의 설계link

Lee, Hak-Gu; 이학구; et al, 한국과학기술원, 2005

422
Design of an aerial combat algorithm based on basic fighter maneuvers and reinforcement learning = 기본 전투 기동과 강화 학습 기반 자율 공중 교전 알고리즘 설계link

Shin, Heemin; Shim, Hyun Chul; et al, 한국과학기술원, 2018

423
Design of automobile devices with reduced flow noise = 차량용 장치의 유동 소음 저감 설계에 대한 연구link

Kim, Seungjoong; Sung, Hyung Jin; et al, 한국과학기술원, 2019

424
Design of co-cured single and double lap joints with carbon fiber-epoxy composite and steel adherends = 탄소섬유-에폭시 복합재료와 강재료를 이용한 외면 및 양면겹치기 동시경화조인트의 설계link

Shin, Kum-Cheol; 신금철; et al, 한국과학기술원, 2003

425
Design of efficient thrust management algorithm for variable thrust solid propulsion system with multi-nozzles = 다중 노즐 가변 추력 고체 추진 시스템의 추력 관리기법 설계link

Lee, Hosung; Bang, Hyochoong; et al, 한국과학기술원, 2020

426
Design of electromagnetic wave absorbing composite structures using planar periodic pattern = 주기 격자 패턴을 이용한 전자기파 흡수 구조체의 설계link

Lee, Won-Jun; 이원준; et al, 한국과학기술원, 2008

427
Design of generalized Time-to-go polynomial guidance law with terminal constraints = 종말 구속조건을 고려한 일반화된 Time-to-go 다항식 유도법칙의 설계link

Kim, Tae-Hun; 김태훈; et al, 한국과학기술원, 2012

428
Design of hemispherical bearings using carbon fiber composite materials with nano particles = 나노입자가 혼입된 탄소섬유 복합재료를 이용한 구면 베어링의 설계link

Park, Dong-Chang; 박동창; et al, 한국과학기술원, 2005

429
Design of humanoid robot platform for substituting human task = 인간의 작업을 대체하기 위한 인간형 로봇의 개발link

Jung, Taejin; Oh, Jun-Ho; et al, 한국과학기술원, 2018

430
Design of Lorentz force-type integrated motor-bearing system using permanent magnets and concentrated windings = 영구자석 및 집중권선을 이용한 자기베어링 내장 전동기의 설계link

Park, Sung-Ho; 박성호; et al, 한국과학기술원, 2006

431
Design of mdel decomposition and performance analysis for enterprise modelling = 기업모델링을 위한 모델분해와 성과분석 방법 설계link

Jang, Ki-Jin; 장기진; et al, 한국과학기술원, 2001

432
Design of novel BOG re-liquefaction system using BOG spray recondenser and experimental investigation on condensation performance on liquid surface in thermally stratified state pressurized tank = BOG Spray Recondenser를 이용한 신개념 BOG 재액화 시스템 설계 및 비평형 압력탱크 내 액체 표면에서의 응축현상에 대한 실험적 연구link

Ryu, Ji Heon; Chang, Dae Jun; et al, 한국과학기술원, 2018

433
Design of radar absorbing structures using dielectric characteristics of fiber reinforced polymeric composites = 섬유강화 복합재료의 유전성질을 이용한 레이더 흡수 구조체 설계에 관한 연구link

Chin, Woo-Seok; 진우석; et al, 한국과학기술원, 2005

434
Design of robust sliding mode controllers for missiles with unmatched uncertainty = 부정합 불확실성을 갖는 유도탄에 대한 강인한 슬라이딩 모드 제어기 설계link

Hwang, Donghyeok; Tahk, Min-Jea; et al, 한국과학기술원, 2019

435
Design of soft micro actuator based on dielectric elastomer actuator for micro robots = 초소형 로봇을 위한 전기활성 고분자 기반 초소형 유연 구동기 개발link

Youn, Jung-Hwan; Kyung, Ki-Uk; et al, 한국과학기술원, 2023

436
Design of VOC recovery and reuse in crude oil loading based on multi-objective optimization and risk based approach = 다목적 최적화와 위험도에 기반한 원유 선적의 유증기 회수 및 재사용 설계link

Lee, Sang-Ick; 이상익; et al, 한국과학기술원, 2014

437
Design optimization and control of pickup actuator for near field recording system = 근접장 정보 저장 시스템에서 픽업 엑츄에이터의 최적 설계 및 제어link

Lee, Seong-Hun; 이성훈; et al, 한국과학기술원, 2009

438
Design optimization for three-dimensional forming processes by an approximation scheme based on state variable linearization = 상태변수 선형화에 기초한 근사최적화법에 의한 3차원 금속 성형 공정의 최적 설계link

Lee, Seok-Ryol; 이석렬; et al, 한국과학기술원, 2006

439
Design sensitivity analysis and topology optimization of viscoelastically damped structures subjected to dynamic loads = 동적 하중을 받는 점탄성 감쇠 구조물의 설계 민감도 해석 및 위상 최적설계link

Yun, Kyeong-Soo; Youn, Sung-Kie; et al, 한국과학기술원, 2018

440
Design space optimization using a numerical design continuation method = 설계연속화 방법을 사용한 설계공간 최적화link

Kim, Il-Yong; 김일용; et al, 한국과학기술원, 2002

441
Design, analysis and aberration correction of high-resolution beam-scanning stimulated emission depletion microscopy = 빔 주사 방식 고분해능 STED 현미경의 설계, 분석 및 수차 보정에 관한 연구link

Yoo, Hong-Ki; 유홍기; et al, 한국과학기술원, 2007

442
Design, analysis and application of confocal self-interference microscopy = 공초점 자가 간섭 현미경의 설계, 분석 및 응용에 관한 연구link

Kang, Dong-Kyun; 강동균; et al, 한국과학기술원, 2006

443
Design, development and application of multi-modal optical microscope for biomedical imaging = 바이오 및 의료 연구를 위한 복합 광학 현미경의 설계와 응용에 관한 연구link

Kim, Young Duk; 김영덕; et al, 한국과학기술원, 2013

444
Detect-and-avoid technology development and flight test for unmanned aircraft system integration = 무인항공기의 통합운용을 위한 충돌회피기술 개발 및 비행시험link

Lee, Jaehyun; Shim, David Hyunchul; et al, 한국과학기술원, 2020

445
Detection of breathing crack in rotor system from the directional frequency response functions and dynamic stiffnesses = 방향성 주파수 응답 함수와 동적 강성을 이용한 회전체 개폐 균열의 탐지link

Kang, Sung-Woo; 강성우; et al, 한국과학기술원, 2010

446
Development and analysis of high range precision and spatial resolution flash LIDAR system using a polarization modulating Pockels cell and a micro-polarizer CCD camera = 편광 변조 포켈스 셀과 마이크로 편광자 CCD 카메라를 사용하는 고 해상도 및 거리 정밀도를 갖는 3차원 플래시 라이다 시스템 개발 및 분석link

JO, SUNGEUN; 조성은; Bang, HyoChoong; 방효충; et al, 한국과학기술원, 2017

447
Development and application of a new prediction method for thermo-acoustic instability based on acoustic mode coupled with incompressible flow = 음향 모드와 비압축성 유동 결합 기반의 열-음향 불안정성 예측 기법 개발 및 적용link

Chindada, Sony; Lee, Duck-Joo; et al, 한국과학기술원, 2019

448
Development and application of displacement-strain based integrated fiber optic sensor system for multiplexing and multi-parameter measurement in structural health monitoring = 구조 건전성 모니터링을 위한 변위-변형률 기반의 다점 및 다변수 측정 광섬유 센서 통합 시스템 개발과 응용link

Lee, Yeon-Gwan; 이연관; et al, 한국과학기술원, 2013

449
Development and application of ultrahigh-speed 2G-OCT system for 3d micro-vascular imaging = 혈관 이미징을 위한 고속 도플러 2 세대 OCT 시스템 개발 및 응용link

Kim, Sun-Hee; 김순희; et al, 한국과학기술원, 2013

450
Development and experimental validation of parameterized simultaneous localization and mapping algorithm = 파라메터 기반의 SLAM 알고리즘 개발 및 실험적 검증link

Han, Jungwook; Kim, Jinwhan; et al, 한국과학기술원, 2019

451
Development and finite element simulation of vibration assisted casting process = 진동 부가 주조 공정의 개발 및 충전 과정의 수치적 모사link

Kim, Ki-Don; 김기돈; et al, 한국과학기술원, 2004

452
Development of a $v_t-k$ model for simulation of turbulent flow = 난류 유동 해석을 위한 $v_t-k$ 모형의 개발link

Kim, Seong-Hoon; 김성훈; et al, 한국과학기술원, 2001

453
Development of a broadband tactile display and role of vibration in the tactual perception = 광대역 질감제시 장치 개발 및 촉감 지각시 진동의 역할 및 영향link

Kyung, Ki-Uk; 경기욱; et al, 한국과학기술원, 2006

454
Development of a cold incremental rolling process using a line array roll set for the manufacture of doubly curved metal plates = 이중 곡률의 금속 판재 성형을 위한 선형 배열 롤 셋을 이용한 냉간 점진적 롤 성형 공정 개발link

Shim, Do-Sik; 심도식; et al, 한국과학기술원, 2010

455
Development of a coupled CFD-CSD method for floating offshore wind turbines = 부유식 해상풍력터빈에 대한 전산유체-전산구조 연계 해석 기법 개발link

Kim, Youngjin; Kwon, Oh Joon; et al, 한국과학기술원, 2020

456
Development of a coupled CFD-CSD Solver for rotor blades = 로터 블레이드에 대한 전산유체-전산구조 연계 해석 코드 개발link

Yu, Dong Ok; 유동옥; et al, 한국과학기술원, 2015

457
Development of a flexible forming system using the incremental roll forming process for the manufacture of a doubly curved sheet metal = 이중곡률의 판재 성형을 위한 점진적 롤 성형 방식의 유연성형시스템 개발link

Yoon, Seok-Joon; 윤석준; et al, 한국과학기술원, 2005

458
Development of a high efficiency joule-thomson refrigerator below 77 K = 77 K 이하의 온도를 위한 고효율 줄-톰슨 냉동기 개발link

Lee, Ji-Sung; 이지성; et al, 한국과학기술원, 2014

459
Development of a high efficiency non-flammable mixed refrigerant Joule-Thomson refrigerator for 100 K cooling temperature = 100 K 냉각 온도의 비가연성 혼합냉매를 이용하는 고효율 줄-톰슨 냉동기 개발link

Lee, Cheonkyu; 이천규; et al, 한국과학기술원, 2017

460
Development of a humanoid robot state estimator robust to modeling uncertainty = 모델링 오차에 강인한 휴머노이드 로봇 상태 추정기 개발link

Bae, Hyoin; Oh, Jun-Ho; et al, 한국과학기술원, 2018

461
Development of a knowledge based program to design epicyclic gear trains = 유성 치차 장치의 설계를 위한 지식 기반 프로그램의 개발link

Kim, Jae-Uk; 김재욱; et al, 한국과학기술원, 1990

462
Development of a microfluidic device for simultaneous mixing and pumping = 동시 혼합 및 펌핑을 위한 미세유체소자 개발link

Kim, Byoung-Jae; 김병재; et al, 한국과학기술원, 2008

463
Development of a multi-time-step vortex particle method for mainrotor–tail rotor interaction = 주로터-꼬리로터 간섭현상을 위한 다중 시간 와류입자법 개발link

Park, Se Hwan; Lee, Duck-Joo; et al, 한국과학기술원, 2018

464
Development of a multiple layer vacuum insulation chip = 다층구조의 진공 단열칩 개발link

Yoon, Il-Seob; 윤일섭; et al, 한국과학기술원, 2009

465
Development of a path smoothing method and a dynamic obstacle avoidance method using optimal velocity selection for a mobile platform = 모바일 로봇을 위한 경로 평탄화 방법 및 최적 속도 선택을 활용한 동적 장애물 회피 방법의 개발link

Kim, Mingeuk; 김민극; et al, 한국과학기술원, 2015

466
Development of a rapid mobile manipulator and model-based stabilization methods = 고속 이동 매니퓰레이터의 개발 및 모델 기반의 안정화 방법에 관한 연구link

Choi, Dong-Il; 최동일; et al, 한국과학기술원, 2012

467
Development of a reaction wheel micro-vibration emulator for efficient jitter test of spacecraft = 인공위성의 효율적인 지터 시험을 위한 반작용 휠 미소진동 에뮬레이터 개발link

Park, Geeyong; 박지용; et al, 한국과학기술원, 2016

468
Development of a robust intention estimation algorithm and rehabilitation technique based on muscle activation for prosthetic hand control = 의수 제어를 위한 근육 활성도 기반 강인한 의도 추정 알고리즘 및 재활 기법 연구link

Cho, Younggeol; Kim, Kyung-Soo; et al, 한국과학기술원, 2022

469
Development of a wire parallel mechanism for measuring a robot pose = 로봇 자세 측정용 와이어 병렬 메카니즘의 개발link

Jeong, Jae-Won; 정재원; et al, 한국과학기술원, 1999

470
Development of advanced metal transfer model for the enhancement of gas metal arc welding process stability = 가스 메탈 아크 용접 공정의 안정성 향상을 위한 진보된 금속 이행 모델의 개발link

Kang, Min-Seok; Lee, Phill-Seung; 이필승; Chung, Hyun; et al, 한국과학기술원, 2018

471
Development of an anti-drone system using a deep reinforcement learning algorithm = 심층 강화학습 기법을 이용한 안티드론 시스템 개발link

Lee, Hanseob; Shim, David Hyunchul; et al, 한국과학기술원, 2021

472
Development of an upwind point collocation meshfree method for hyperbolic equations = 쌍곡형 방정식을 위한 upwind point collocation meshfree method의 개발link

Ahn, Mu-Young; 안무영; et al, 한국과학기술원, 2004

473
Development of autonomous decision-making system for a prosthetic hand using proximity perception = 다자유도 의수의 다양한 파지 의도 파악이 가능한 근접센서 기반 자율 파지 계획 시스템 개발link

Heo, Si-Hwan; Park, Hyung-Soon; et al, 한국과학기술원, 2023

474
Development of autonomous driving sensing system capable of real-time weather condition recognition and object detection/tracking in snowy weather = 강설 환경에서 실시간 기상상태 확인 및 객체 탐지/추적이 가능한 자율주행 센싱 시스템 개발link

Park, Ji-il; Kim, Kyung-soo; et al, 한국과학기술원, 2022

475
Development of basic operating and motion-transforming elements based on elastic design and their applications = 탄성 설계를 이용한 정밀 기본 구동 및 운동 전환 요소의 개발과 응용link

Ha, Cheol Woo; 하철우; et al, 한국과학기술원, 2016

476
Development of compact and lightweight brake mechanisms for portable and wearable robots = 휴대형 및 착용형 로봇을 위한 소형 경량 브레이크 메커니즘 개발link

Lee, Kyoung-Soub; Park, Hyung-Soon; et al, 한국과학기술원, 2023

477
Development of composite foot structure including ground reaction force sensing for fast biped robots = 지면 반력 측정이 가능한 이족 고속주행 로봇용 복합재료 발 구조 개발link

Lee, Jinyi; 이진이; Kim, Soo Hyun; 김수현; et al, 한국과학기술원, 2017

478
Development of composite spherical bearing = 복합재료 구면 베어링의 개발link

Kim, Byung-Chul; 김병철; et al, 한국과학기술원, 2008

479
Development of continuous particle/cell manipulation and separation by optical force = 광력을 이용한 입자/세포의 연속적인 조작 및 분리기법의 개발link

Lee, Kyung-Heon; 이경헌; et al, 한국과학기술원, 2012

480
Development of continuum mechanics based beam elements for linear and nonlinear analyses of multi-layered composite beam and helically stranded cable structures = 다중 적층빔 및 케이블의 선형 및 비선형 해석을 위한 연속체역학 기반 빔 유한요소의 개발link

Kim, Hyo-Jin; Lee, Phill-Seung; et al, 한국과학기술원, 2020

rss_1.0 rss_2.0 atom_1.0