Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Type Thesis(Ph.D)

Showing results 361 to 420 of 2479

361
Continuous boundary reconstruction from noisy images using spatial interaction and application = 다잡음 영상에서 공간 상호작용을 이용한 연속 경계의 복원 및 응용link

Kim, Jae-Seon; 김재선; et al, 한국과학기술원, 1996

362
Control for Optimized Kinesthetic Perception in Scaled Teleoperation of Soft Tissues = 연성 생체조직의 원격조작에서 햅틱 감각 최적화를 위한 제어link

Son, Hyoung-Il; 손형일; et al, 한국과학기술원, 2010

363
Control of hybrid-type three-pole active and permanent magnetic bearing system using redundant coordinates = 잉여좌표계를 이용한 3극 전자기 및 영구자석 복합 베어링계의 제어link

Park, Sang-Hyun; 박상현; et al, 한국과학기술원, 2010

364
Control of turbulent flow for drag reduction = 항력저감을 위한 난류 유동 제어link

Choi, Jung-Il; 최정일; et al, 한국과학기술원, 2002

365
Control of turbulent separated-reattaching flow over a backward-facing step by local forcing = 국소 교란에 의한 난류 박리 재부착 유동의 제어link

Chun, Kyung-Bin; 전경빈; et al, 한국과학기술원, 1997

366
Controller design for a magnetically suspended milling spindle based on chatter stability analysis = 채터 안정도 해석에 근거한 자기베어링 밀링 주축의 제어기 설계link

Kyung, Jin-Ho; 경진호; et al, 한국과학기술원, 2003

367
Convective heat transfer enhancement in a confined passageway = 국한 유로내에서의 대류 열전달 증가에 관한 연구link

Kim, Seo-Young; 김서영; et al, 한국과학기술원, 1995

368
Cooperative circular pattern target tracking by multiple UAVs using navigation function = Navigation 함수를 이용한 다수 무인기의 원 형태 목표물 추종 유도법칙 연구link

Hong, Jin-Sung; Bang, Hyo-Choong; et al, 한국과학기술원, 2018

369
Cooperative guidance of multiple uavs for improved target tracking = 목표물 추적 성능 향상을 위한 다수 무인기의 협업 유도link

Lee, Won-Suk; 이원석; et al, 한국과학기술원, 2011

370
Cooperative homing guidance law of multiple anti-ship missiles for survivability enhancement = 다수 대함유도탄의 생존성 향상을 위한 협업 기반 호밍유도법칙link

Kim, Yeong-Cheol; Lee, Chang-Hun; et al, 한국과학기술원, 2021

371
Copper nanowire and flower-like CuO nanostructure surfaces for enhanced boiling = 구리 나노와이어와 산화구리 꽃 형상의 나노구조 표면을 이용한 비등성능 향상link

Im, Yun-Hyeok; 임윤혁; et al, 한국과학기술원, 2010

372
Coprime factorization controller reduction using a new set of invariants = 새로운 불변항을 이용한 소인수분해 제어기 축소link

Sun, Byung-Chan; 선병찬; et al, 한국과학기술원, 1997

373
Coupled bending vibration analysis of flexible rotors by using the assumed modes and substructure synthesis method = 가정 모드 및 부분 구조 합성법을 이용한 탄성 회전체의 연성 굽힘 진동 해석link

Chun, Sang-Bok; 전상복; et al, 한국과학기술원, 1996

374
Coupled transport and kinetics in the mixing region of a hydrocarbon reformer = 탄화수소 개질기 혼합 영역에서의 열유동 및 화학반응동역학 현상에 대한 연구link

Kim, Sun-Young; 김선영; et al, 한국과학기술원, 2013

375
Covariant 라플라스 방정식을 이용한 경계에 근사적으로 직교하는 삼차원 격자형성방법 개발 = Development of three-dimensional grid generation method for nearly orthogonal grids near boundaries using the covariant laplace equationslink

정희권; Jeong, Hee-Kwon; et al, 한국과학기술원, 1997

376
CPF 및 LNT에서의 디젤 유해 물질 저감 특성에 관한 모델링 연구 = A modeling on the diesel emission characteristics in CPF and LNTlink

이승열; Lee, Seung-Yeol; et al, 한국과학기술원, 2012

377
Creep rupture and creep crack growth by diffusivegrowth of continually nucleating cavities = 연속 핵생성되는 기공의 확산성장으로 인한 크립파괴 및 크립균열전파link

Chung, Jin-Oh; 정진오; et al, 한국과학기술원, 1988

378
Cross-ply 복합적층구조의 섬유방향 파손 특성에 관한 연구 = Transverse failure in cross-ply laminated compositeslink

임승규; Lim, Seung-Gyu; et al, 한국과학기술원, 1988

379
Cryogenic characteristics of composite materials and application to the cryogenic propellant tank = 복합재의 극저온 특성 및 극저온 추진제 탱크 적용을 위한 연구link

Kang, Sang-Guk; 강상국; et al, 한국과학기술원, 2007

380
$Cu-ZnO/Al_2O_3$ -metal foam 촉매를 이용한 서브밀리미터 스케일 과산화수소 이용 메탄올 자열 개질기의 반응 특성 = Reaction characteristics of sub-millimeter scale autothermal methanol reformer using $Cu-ZnO/Al_2O_3$ -metal foam catalyst assisted by the decomposition of hydrogen peroxidelink

최원영; Choi, Won-Young; et al, 한국과학기술원, 2010

381
Cutting process modeling and adaptive force control of the turning process = 선반작업에서의 절삭과정 모형화와 절삭력 적응제어link

Hwang, Hong-Yeon; 황홍연; et al, 한국과학기술원, 1988

382
CWS 액적의 점화 및 연소에 관한 연구 = A study on the ignition and combustion of coal-water slurry dropletlink

안국영; Ahn, Kook-Young; et al, 한국과학기술원, 1994

383
Damping of vibration in beams and plates using curved acoustic black holes with consideration of cut-on frequency = 곡선형 음향 블랙홀의 컷온 주파수를 고려한 빔과 플레이트의 진동 감쇠link

Lee, Jae Yeon; Jeon, Wonju; et al, 한국과학기술원, 2022

384
Decelopment of an array of pressure sensors and its application to turbulent flows = 다중배열 압력센서의 개발과 난류유동장에 대한 적용link

Lee, In-Won; 이인원; et al, 한국과학기술원, 2000

385
Decentralized linear optimal control for cooperative networked teams via invariant subspace decomposition = 불변공간 분해기법을 이용한 네트워크 협업팀의 분산화 선형 최적제어기법link

Lee, Daniel; Choi, Han-Lim; et al, 한국과학기술원, 2022

386
Deep neural networks based anomaly detection models for aerospace system = 심층신경망 기반 항공우주시스템 이상진단모델 연구link

Ahn, Hyojung; Choi, Han-Lim; et al, 한국과학기술원, 2020

387
Delamination buckling for laminated composite structures with curvature = 곡률을 갖는 복합적층구조물의 적층분리 좌굴link

Kim, Yu-Jun; 김유준; et al, 한국과학기술원, 1996

388
Design and analysis of adaptive fuzzy logic controller with dual outputs and its application to plants with time-varying dead-zone = 이중 출력 적응 퍼지 제어기의 설계 및 해석과 시변 사구간 특성을 갖는 플랜트에의 응용link

So, Sang-Ho; 소상호; et al, 한국과학기술원, 1999

389
Design and analysis of an ultraprecision rotary motor = 초정밀 회전모터의 설계와 해석에 관한 연구link

Kim, Sang-Chae; 김상채; et al, 한국과학기술원, 2000

390
Design and analysis of high speed high resolution cross structured illumination confocal microscopy = 고속 고분해능 십자 구조 조명 공초점 현미경의 설계와 분석에 관한 연구link

Ahn, Myoung-Ki; 안명기; et al, 한국과학기술원, 2011

391
Design and analysis of multi-confocal spectral imaging microscopy = 다중 공초점 분광 현미경의 설계와 분석에 관한 연구link

송인천; Song, In-Cheon; et al, 한국과학기술원, 2008

392
Design and attitude control of a spinning octaSail solar sailcraft = 팔각형 태양돛 우주선 설계 및 자세제어link

Shafiq, Umar; Bang, Hyochoong; et al, 한국과학기술원, 2019

393
Design and axial position control of a small-sized active magnetic bearing with non-laminated core = 비적층 코어를 갖는 소형 전자기 베어링 설계 및 축 방향 위치 제어link

Kim, Ha-Yong; 김하용; et al, 한국과학기술원, 2004

394
Design and characteristics of composite structures for high speed machining centers = 초고속 공작기계용 복합재료 구조물의 설계와 특성link

Suh, Jung-Do; 서정도; et al, 한국과학기술원, 2004

395
Design and continuous gain scheduling control of high precision XY-Theta stage = 평면 3축 초정밀 스테이지의 설계와 연속이득계획법을 이용한 제어link

Lee, Sung-Q; 이성규; et al, 한국과학기술원, 2001

396
Design and control of a magnetically levitated six degrees-of-freedom planar motor using t-shape halbach magnet array = T형 할바흐 자석배열을 이용한 6 자유도 자기부상 평면모터의 설계 및 제어link

Kim, Jung-Jae; 김정재; et al, 한국과학기술원, 2010

397
Design and control of a six degree of freedom active vibration isolator using voice coil motor = 보이스 코일 모터 이용한 6자유도 능동 제진대의 설계 및 제어에 관한 연구link

Banik, Rahul; 바닉, 라훌; et al, 한국과학기술원, 2008

398
Design and control of a six degree-of-freedom five-bar parallel haptic interface = 6 자유도 five-bar 병렬 햅틱 인터페이스 설계와 제어link

Woo, Ki-Young; 우기영; et al, 한국과학기술원, 2000

399
Design and control of ball-ramp dual clutch transmission using self-energizing principle = 자기 강화 원리를 이용한 볼-램프 듀얼 클러치 변속기의 설계 및 제어link

Kim, Dong-Hyun; Choi, Seibum; et al, 한국과학기술원, 2022

400
Design and control of nano precision dual servo actuator for near field optical recording system = 근접장 광 정보저장기기용 나노 정밀도 이중 서보 구동기의 설계 및 제어link

Jeong, Jae-Hwa; 정재화; et al, 한국과학기술원, 2005

401
Design and control of planar robot manipulator using distributed actuation principle = 분산구동원리를 이용한 평면 로봇 매니퓰레이터의 설계 및 제어link

Kim, Sung Hwan; 김성환; et al, 한국과학기술원, 2015

402
Design and development of a lightweight metallic sandwich panel using cross-sectionally curved pyramidal truss cores = 피라미드 내부 구조재의 단면형상을 성형한 경량 금속샌드위치 소재의 설계에 관한 연구link

Lee, Sung-Uk; 이성욱; et al, 한국과학기술원, 2016

403
Design and development of a metallic sandwich plate with truss type 3-dimensional inner structures = 3차원 트러스형 구조를 내부에 가지는 금속 샌드위치 판재의 설계 및 제작공정 개발에 관한 연구link

Jung, Chang-Gyun; 정창균; et al, 한국과학기술원, 2009

404
Design and fabrication of radar absorbing structures including frequency selective fabric composites = 주파수 선택적인 직물 복합재료를 갖는 전자파 흡수 구조체의 제작 및 설계link

Lee, Sang-Eui; 이상의; et al, 한국과학기술원, 2006

405
Design and moving position estimation for free ranging automated guided vehicle with auxiliary wheel = 보조륜이 장착된 자율주행 반송차의 설계 및 이동 위치 추정에 관한 연구link

Kim, Dong-Kyu; 김동규; et al, 한국과학기술원, 1998

406
Design and path planning of a free-ranging mobile robot with laser range finder = 레이저 거리계를 장착한 자율 이동로봇의 설계 및 경로계획link

Cha, Young-Youp; 차영엽; et al, 한국과학기술원, 1995

407
Design and performance evaluation of flow-control-valve-only deep throttle control system for liquid-propellant rocket for space exploration = 우주 탐사용 액체 로켓의 단일 밸브 기반 광범위 추력 제어 시스템 설계 및 성능 평가link

Moon, Yong-Jun; 문용준; et al, 한국과학기술원, 2014

408
Design and position control of a disk type integrated motor-bearing system = 원판형 자기베어링 내장 전동기의 설계 및 반경방향 위치제어link

Han, Woo-Sup; 한우섭; et al, 한국과학기술원, 2000

409
Design and validation of bipropellant rocket engine with storable propellants = 저장성 추진제를 이용한 이원추진제 로켓 엔진의 설계와 검증link

Jo, Sung-Kwon; 조성권; et al, 한국과학기술원, 2012

410
Design and validation of hydrogen peroxide/kerosene bipropellant thruster = 과산화수소/케로신 이원추진제 추력기의 요소설계 및 검증link

Heo, Seonuk; Kwon, Se Jin; et al, 한국과학기술원, 2018

411
Design of a 6 DOF parallel manipulator for micro-positioning surgical robot and its forward kinematic analysis with the tetrahedron approach = 고정도 수술로봇용 6 자유도 병렬기구의 디자인과 사면체 접근법을 사용한 정기구학 해석link

Song, Se-Kyong; 송세경; et al, 한국과학기술원, 2002

412
Design of a fast response inflatable soft pneumatic bending actuator for wearable robots = 웨어러블 로봇을 위한 빠른 반응의 팽창형 소프트 공압 굽힘 구동기 설계link

Park, Junghoon; Kim, Jung; et al, 한국과학기술원, 2021

413
Design of a glass composite anchor for LNG cargo containment systems = 액화천연가스 저장시스템의 유리섬유 복합재료 앵커 개발link

Lee, Kwan-Ho; 이관호; et al, 한국과학기술원, 2010

414
Design of a laser absorption spectroscopy based compact gas analysing sensor for high speed flow diagnosis = 고속 유동 진단을 위한 레이저 흡수 분광법 기반 소형 기체분석 센서의 설계link

Shim, Hanseul; Park, Gisu; et al, 한국과학기술원, 2022

415
Design of a lightweight hydraulic actuating bipedal robot with an onboard power system = 파워 시스템이 탑재된 경량 유압 구동 이족 보행 로봇 설계link

Kim, Sung-Woo; Park, Hae-Won; et al, 한국과학기술원, 2022

416
Design of a model-based robust controller for vehicle with wet type dual clutch transmission = 습식 듀얼 클러치 변속기가 장착된 차량의 모델 기반 강인 제어 시스템 개발link

Jung, Sanghun; Choi, Seibum; et al, 한국과학기술원, 2022

417
Design of a novel haptic interface for endoscopy simulation = 소화기 내시경 시뮬레이션을 위한 새로운 구조의 햅틱 인터페이스 설계link

Gu, Yunjin; 구윤진; et al, 한국과학기술원, 2015

418
Design of a novel spherical actuator using a VCM principle = VCM 원리를 이용한 구형 구동기 개발에 관한 연구link

Kim, Hyo-Young; 김효영; et al, 한국과학기술원, 2013

419
Design of acoustic fan tester for fan noise measurement at system resistances = 시스템 저항에서 팬 소음 측정을 위한 음향 팬 테스터 설계link

Park, Minjun; Lee, Duck Joo; et al, 한국과학기술원, 2018

420
Design of adhesive joints at high environmental temperature = 고온 환경 조건하의 접착조인트 설계에 관한 연구link

Kim, Jin-Kook; 김진국; et al, 한국과학기술원, 2003

rss_1.0 rss_2.0 atom_1.0