2161 | 재생형 펌프의 날개 각도에 따른 성능 변화에 관한 연구 = Study on the effect of blade angle on regenerative pump performancelink 최원철; Choi, Won-Chul; 성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 2013 |
2162 | 저 가시성 환경에서 효과적인 영상 개선 방법 및 특징 추출에 관한 연구 = (A) study on effective image improvement method and feature extraction in low visibility environmentslink 김경일; 김수현; et al, 한국과학기술원, 2018 |
2163 | 저결맞음 간섭계를 이용한 다층 형상 측정 = Multiple-layered surface measurement using low-coherence interferometrylink 이창윤; Lee, Chang-Yun; et al, 한국과학기술원, 2016 |
2164 | 저결맞음 간섭계를 이용한 대구경 거친 유리 표면 형상 측정 = Large-aperture ground glass surface form measurement using low-coherence scanning interferometrylink 배은덕; Bae, Eun-Deok; et al, 한국과학기술원, 2017 |
2165 | 저결맞음 간섭계를 이용한 대면적 복잡 형상 측정 = Meso-scale complex surface measurement using low-coherence interferometrylink 유준호; You, Joon-Ho; et al, 한국과학기술원, 2008 |
2166 | 저속충격을 받는 복합적층판의 거동과 손상에 대한 연구 = Response and damage of composite laminates subjected to low-velocity impactlink 최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1994 |
2167 | 저주파수 흡음을 위한 헬름홀쯔 공명기 배열형 패널의 설계 방법론 = Design method of helmholtz resonator array panels for low-frequency sound absorptionlink 김상렬; Kim, Sang-Ryul; et al, 한국과학기술원, 2006 |
2168 | 저항 점용접의 공정 해석에 의한 용접부의 잔류응력과 변형에 대한 연구 = A study on residual stress and deformation of resistance spot welded structure using process analysislink 차병우; Cha, Byoung-Woo; 나석주; 송지호; et al, 한국과학기술원, 2002 |
2169 | 저해상도 지도를 참조하는 다중정합 기반 영상항법 알고리즘 연구 = Multi-matching based vision navigation algorithm referencing a low-resolution maplink 신석현; 이지윤; et al, 한국과학기술원, 2022 |
2170 | 적층 복합재 구조물에 대한 확률유한요소법과 시스템 신뢰도 해석 = Stochastic finite element method and system reliability analysis for laminated composite structureslink 박지상; Park, Ji-Sang; et al, 한국과학기술원, 1995 |
2171 | 적층고무 면진베어링을 이용한 원자로구조물의 지진응답 감소방법에 관한 연구 = Study on laminated rubber bearing to reduce a nuclear reactor structure's seismic responseslink 유봉; Yoo, Bong; et al, 한국과학기술원, 2002 |
2172 | 적층로터 및 고감쇠 베어링의 해석과 펄스발전기의 설계 및 성능 특성에 관한 연구 = Analysis of laminated rotor and high damped bearing and study on design and performance characteristics of pulsed generatorlink 김영춘; Kim, Yeong-Chun; et al, 한국과학기술원, 2004 |
2173 | 전개성능을 고려한 태양전지판 전개장치용 테잎스프링 힌지 설계 연구 = A study on the tape spring hinge design for deployment device of satellite solar array considering deployment performanceslink 김경원; Kim, Kyung Won; et al, 한국과학기술원, 2015 |
2174 | 전기도금공정을 이용하여 제작된 전해질 기울기 센서 = Electrolytic tilt sensor fabricated by using electroplating processlink 이재형; Lee, Jae-Hyoung; et al, 한국과학기술원, 2009 |
2175 | 전기도금된 나노 결정립 니켈 박막의 인장 및 피로 거동 평가 = Evaluation of tensile and fatigue behavior of electrodeposited nanocrystalline nickel filmslink 백동천; Baek, Dong-Cheon; et al, 한국과학기술원, 2009 |
2176 | 전기력이 응집체의 형상과 성장특성에 미치는 영향에 대한 연구 = The effect of electric force on morphology and growth of aggregatelink 박형호; Park, Hyung-Ho; et al, 한국과학기술원, 2002 |
2177 | 전기수력학적 힘을 이용한 단분산 액적의 생성에 관한 연구 = Generation of monodisperse droplets by using electrohydrodynamic forcelink 김명찬; Kim, Myoung-Chan; et al, 한국과학기술원, 2003 |
2178 | 전기자동차용 변속기를 위한 새로운 방식의 클러치 기구에 대한 연구 = (A) study on the new clutch mechanism for the electric vehicle transmissionlink 박승욱; 최세범; Choi, Sei Bum; 김경웅; et al, 한국과학기술원, 2019 |
2179 | 전기장 제어 확산 화염의 연소 특성 연구 = Investigation on the combustion characteristics of the electric field controlled diffusion flamelink 김상민; 백승욱; et al, 한국과학기술원, 2019 |
2180 | 전기장을 이용한 카본나노튜브 정렬 및 부착에 관한 연구 = A study on alignment and attachment of carbon nanotube using dlectric fieldlink 이형우; Lee, Hyung-Woo; et al, 한국과학기술원, 2005 |
2181 | 전기장인가조립법에 의한 탄소나노튜브 카트리지 개발 = Development of carbon nanotube cartridges using electric-field-assisted assembly methodlink 최재성; Choi, Jai-Seong; et al, 한국과학기술원, 2008 |
2182 | 전기적 분무 열분해를 이용한 나노 구조 물질 제조 = Synthesis of nanostructured materials using electrospray pyrolysislink 오현철; Oh, Hyun-Cheol; et al, 한국과학기술원, 2008 |
2183 | 전기적으로 대전된 액적의 충돌 후 거동에 관한 실험적 연구 = An experimental study on post-impingement behavior of an electrically charged dropletlink 류성욱; Ryu, Sung-Uk; et al, 한국과학기술원, 2008 |
2184 | 전단층 유동의 안정 및 준안정 해석 = Spectra and pseudospectra of shear flowslink 최상규; Choi, Sang-Kyu; et al, 한국과학기술원, 2003 |
2185 | 전도 균열을 갖는 강유전체 세라믹의 파괴 인성에 관한 연구 = A study on a fracture toughness for conducting crack in ferroelectric ceramicslink 범현균; Beom, Hyen-Kyun; et al, 한국과학기술원, 2003 |
2186 | 전도성 혼합 섬유를 이용한 직물형 밀리미터파 흡수체 설계 = Design of fabric millimeter wave absorber using mixed conductive yarnlink 신상훈; Shin, Sang-Hun; et al, 한국과학기술원, 2010 |
2187 | 전동형 진동식 압축기의 동적 해석 = Analysis of dynamics of electrodynamic oscillating compressorlink 최규상; Choe, Gyu-Sang; et al, 한국과학기술원, 2000 |
2188 | 전류 환경 아래에서 유연 전극 박막의 전기-기계적 특성 연구 = Electro-mechanical characteristics of flexible conductive film on polymer substrate under electric currentlink 장동원; Jang, Dong-Won; et al, 한국과학기술원, 2017 |
2189 | 전문가 시스템을 이용한 복합재 구조물의 설계 = Design of composite structures using expert systemlink 김정석; Kim, Jung-Seok; et al, 한국과학기술원, 1999 |
2190 | 전문가 시스템을 이용한 자동조립순서 추론에 관한 연구 = An expert system approach to the automatic generation of robotic assembly sequenceslink 조덕영; Cho, Duck-Young; et al, 한국과학기술원, 1992 |
2191 | 전문가시스템 구축을 통한 피로수명 평가법의 통합과 그 응용 = Development of unified method for fatigue life evaluation through construction of expert system and its applicationlink 전우수; Jeon, Woo-Soo; et al, 한국과학기술원, 2001 |
2192 | 전산유체역학과 유한요소기법의 연동체제를 이용한 아크 용접공정의 열적-금속학적-기계적 거동에 대한 연구 = A thermal-metallurgical-mechanical study of arc welding processes by computational fluid dynamics and finite element method frameworklink 천현필; Cheon, Jason Hyeon Pil; et al, 한국과학기술원, 2017 |
2193 | 전산유체역학을 이용한 예인되는 부유체의 침로 안정성에 대한 연구 = A study on directional stability of towed floating bodies by computational fluid dynamicslink 권창섭; Kwon, Chang Seop; et al, 한국과학기술원, 2015 |
2194 | 전산유체역학을 활용한 파이프 조관용접 및 원주방향 용접의 용융풀 거동에 대한 연구 = A study on molten pool flow behavior in pipe seam welding and girth welding processes by computational fluid dynamicslink 조대원; Cho, Dae-Won; et al, 한국과학기술원, 2014 |
2195 | 전압구동시 압전구동기의 위치결정 정도에 대한 비선형모델링에 관한 연구 = Nonlinear modeling for positioning uncertainty of piezoelectric actuators driven by voltage inputlink 정승배; Jung, Seung-Bae; et al, 한국과학기술원, 1993 |
2196 | 전역 및 광대역 실내 소음 제어를 위한 흡음재 배치 방법론 = Absorptive material arrangement method for global interior noise control in wide frequency rangelink 조성호; Cho, Sung-Ho; et al, 한국과학기술원, 2005 |
2197 | 전자 패키지에서 다층 구조의 기계적인 신뢰성에 관한 연구 = A study on mechanical reliability of multi- layered structure in electronic packageslink 김재현; Kim, Jae-Hyun; et al, 한국과학기술원, 2002 |
2198 | 전자 패키징을 위한 종방향 초음파 접합 공정에 관한 연구 = A study on longitudinal ultrasonic bonding process for electronic packaginglink 김정호; Kim, Jung-Ho; et al, 한국과학기술원, 2004 |
2199 | 전자기유량계의 특성 평가를 위한 자기장과 유동장의 실험 및 수치해석 = An experimental and numerical analysis of electromagnetic and flow fields for characterization of an electromagnetic flowmeterlink 임기원; Lim, Ki-Won; et al, 한국과학기술원, 1998 |
2200 | 전자기적 아크 요동을 이용한 자동용접에 관한 연구 = A study on the automatic welding by using electromagnetic arc oscillationlink 강윤희; Kang, Youn-Hee; et al, 한국과학기술원, 2002 |
2201 | 전자식 유압 비례 복합 밸브에 관한 연구 = Study of an electro-hydraulic proportional compound valvelink 송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1980 |
2202 | 전자파흡수 복합재구조의 흡수 성능 향상을 위한 제작 공정 연구 = Fabrication methods for the improved absorption performance in microwave-absorbing compositeslink 송태훈; 김천곤; et al, 한국과학기술원, 2015 |
2203 | 전자패키지 Ball grid array 소더 조인트의 기계적 피로 특성에 관한 연구 = A study on mechanical fatigue behaviors of ball grid array solder joints for electronic packaginglink 박태상; Park, Tae-Sang; et al, 한국과학기술원, 2004 |
2204 | 전정안구반사를 모방한 영상 흔들림 억제에 대한 연구 = Study of constraining image shaking by the vestibulo-ocular reflexlink 고두열; Koh, Doo-Yeol; et al, 한국과학기술원, 2013 |
2205 | 전조 압연 공정에서의 회전 압축 해석 = Analysis of rotational compression in the transverse rolling processlink 나경환; Na, Kyoung-Hoan; et al, 한국과학기술원, 1989 |
2206 | 전진 비행하는 로터의 자동회전 범위와 특성에 관한 수치적 연구 = A numerical study on the autorotation range and characteristics of a rotor in forward flightlink 김학윤; Kim, Hak-Yoon; et al, 한국과학기술원, 2009 |
2207 | 전파 흡수 구조를 위한 전도성 미세 패턴 직물의 유전율 제어 연구 = Control of dielectric properties of micropattern printed fabric for radar absorbing structureslink 김상용, 한국과학기술원, 2022 |
2208 | 전파흡수구조의 전자기적 특성 분포의 불연속성에 관한 연구 = (A) study on discontinuity of electromagnetic characteristics distribution of radar absorbing structureslink 현종민; 이정률; et al, 한국과학기술원, 2022 |
2209 | 전해 동박막 재료의 변동하중에서의 피로특성에 관한 기초 연구 = A preliminary study on fatigue property of electrodeposited copper thin films under variable loadinglink 이도영; Lee, Do-Young; et al, 한국과학기술원, 2011 |
2210 | 전해 동박막 재료의 피로수명과 소성변형 거동 = Fatigue life and plastic deformation behavior of electrodeposited copper thin filmslink 황보윤; Hwang Bo, Yun; et al, 한국과학기술원, 2009 |
2211 | 전해 프로세스에 의한 미세 전극 제작 및 기초 패턴의 미세 방전 성형에 대한 연구 = Electrochemical fabrication of micro electrodes and machining of miniaturized basic patternslink 임형준; Lim, Hyung-Jun; et al, 한국과학기술원, 2003 |
2212 | 전해 프로세스에 의한 초미세 전극의 제작 및 응용 = Fabrication of ultrathin electrode by electrochemical process and its applicationslink 임영모; Lim, Young-Mo; et al, 한국과학기술원, 1999 |
2213 | 절대거리 측정을 위한 펨토초 레이저 광 빗 기반의 광주파수 발생기 = Optical frequency generator for absolute distance measurements based on the optical frequency comb of a femtosecond pulse laserlink 김영진; Kim, Young-Jin; et al, 한국과학기술원, 2008 |
2214 | 절대거리 측정을 위한 펨토초 레이저를 이용한 분산 간섭계에 관한 연구 = Spectrally-resolved interferometry using a femtosecond pulse laser for absolute distance measurementslink 주기남; Joo, Ki-Nam; et al, 한국과학기술원, 2007 |
2215 | 절삭 작업에서의 채터 진동에 관한 연구 = A study on the chatter vibration in metal cuttinglink 김정석; Kim, Jeong-Suk; 송지호; 이병호; et al, 한국과학기술원, 1991 |
2216 | 절점최소자승요소법의 개발 및 초탄성 구조물의 형상설계민감도해석에의 적용 = Development of node-based least-square element method and its application to shape design sensitivity analysis of hyperelastic structureslink 최용기; Choi, Yong-Gie; et al, 한국과학기술원, 2004 |
2217 | 절차적 CAD 모델의 생성을 위한 설계특징형상의 순서결정 방법 = A method for sequencing of the design features to create a procedural CAD modellink 김익준; Kim, Ik-June; et al, 한국과학기술원, 2014 |
2218 | 점 기반 명칭법을 이용한 파라메트릭 CAD 데이터의 교환 = A point-based naming method for the exchange of parametric CAD Modelslink 송일환; Song, Il-Hwan; et al, 한국과학기술원, 2011 |
2219 | 점탄성 재료 및 ER 유체를 이용한 복합재 구조물의 진동 저감 : Vibration reduction of composite structures using viscoelastic material and Electro-Rheological fluid = Vibration reduction of composite structures using viscoelastic material and Electro-Rheological fluidlink , 한국과학기술원, 2000 |
2220 | 점탄성 재료의 복소탄성계수 추출 = Estimation of complex modulus for viscoelastic materialslink 안태길; Ahn, Tae-Kil; et al, 한국과학기술원, 1994 |