2041 | 실시간 최적 지형 추종 시스템 = On-line optimal terrain tracking systemlink 이성만; Lee, Sung-Mhan; 변증남; 박승오; et al, 한국과학기술원, 1990 |
2042 | 실험 및 전산모사에 의한 둔감화약의 폭발특성 연구 = A study on the detonation behavior of insensitive explosive by experiments and computational simulationslink 박정수; Park, Jung-Su; et al, 한국과학기술원, 2011 |
2043 | 실험계획법 적용 풍동시험 결과를 활용한 매립형 대기자료시스템 모델링 연구 = Flush air data system modeling using doe-based wind-tunnel testlink 이명섭; 안재명; et al, 한국과학기술원, 2023 |
2044 | 실험계획법과 반응표면법을 이용한 효율적인 신뢰도 해석 기법의 개발에 관한 연구 = Development of an efficient reliability analysis method using design of experiments augmented by response surfacelink 이상훈; Lee, Sang-Hoon; et al, 한국과학기술원, 2006 |
2045 | 실험계획법을 이용한 공차 해석 방법 개선과 합성 시스템 개발에 관한 연구 = A study on development of improved tolerance analysis and synthesis system usign design of experimentlink 서현석; Seo, Hyun-Seok; et al, 한국과학기술원, 2002 |
2046 | 심혈관 질환 진단을 위한 초고속/다기능 광간섭단층촬영 시스템 개발 = Development of high-speed/multi-functional optical coherence tomography system for diagnosis of coronary artery diseaselink 조한샘; Cho, Han Saem; et al, 한국과학기술원, 2016 |
2047 | 쌍정의 영향을 고려한 티타늄의 변형률속도 의존 경화 모델 = Rate dependent hardening model for pure titanium considering the effect of deformation twinninglink 안광현; Ahn, Kwang-Hyun; et al, 한국과학기술원, 2013 |
2048 | 쌍행렬 공진화 알고리듬을 이용한 강인 제어기 설계 = Robust control design using bimatrix co-evolution algorithmlink 허종; Hur, Jong; et al, 한국과학기술원, 2004 |
2049 | 아연도금 강판의 체크마크 무늬를 발생하지 않는 에어나이프 시스템 개발 = Development of a novel air-knife system that prevents the check-mark stain on the galvanized steel striplink 윤현기; Yoon, Hyun-Gi; et al, 한국과학기술원, 2010 |
2050 | 아크 및 레이저 용접의 용융풀 거동에 관한 동적 해석 = Dynamic analysis of molten pool behavior in arc and laser weldinglink 고성훈; Ko, Sung-Hoon; et al, 한국과학기술원, 2001 |
2051 | 안정화 방법을 이용하는 Mindlin 판 요소의 수학적 특성 및 수치적 분석 = Mathmatical and numerical analyses of the mindlin plate element using the stabilization methodlink 이용주; Lee, Yong-Joo; et al, 한국과학기술원, 1993 |
2052 | 알루미늄 합금 7475-T7351의 랜덤하중하의 피로균열 진전거동 평가 = Evaluation of fatigue crack growth behavior of 7475-t7351 aluminum alloy under random loadinglink 최재만; Choi, Jae-Man; et al, 한국과학기술원, 2009 |
2053 | 압전소자 구동기의 이력과 크립 현상의 분석 및 응용에 관한 연구 = Hysteresis and creep analysis of PZT actuators and applicationlink 정회원; Jung, He-Won; et al, 한국과학기술원, 2001 |
2054 | 압전형 초음파 변환자의 제작 및 성능해석 = Fabrication and performance analysis of piezoelectric ultrasonic transducerslink 이종현; Lh, Jong-Hyun; et al, 한국과학기술원, 1986 |
2055 | 압축 예하중을 받고 있는 점탄성 재료의 복소탄성계수 결정 = Determination of complex modulus of viscoelastic materials subject to compressive pre-loadinglink 이정학; Lee, Jeong-Hak; et al, 한국과학기술원, 2001 |
2056 | 압축 착화 엔진에서 저온 디젤 연소의 성능 개선 = Performance enhancement of low temperature diesel combustion in a compression ignition enginelink 한상욱; Han, Sang-Wook; et al, 한국과학기술원, 2013 |
2057 | 압축성 난류 모형에 대한 연구 : 제한자와 압력-변형률 모델 = A study on modeling of compressible turbulence : limiters and pressure-strain modellink 박창환; Park, Chang-Hwan; et al, 한국과학기술원, 2005 |
2058 | 압축성 난류 유동의 수치적 해석을 위한 대수 응력 모형 개발에 관한 연구 = A study on the algebraic reynolds stress model for numerical analysis of compressible turbulent flowslink 김건홍; Kim, Geon-Hong; et al, 한국과학기술원, 2013 |
2059 | 압축성 점성 유동에서의 가상경계법의 개선에 대한 연구 = A Study on enhancement of immersed boundary method for compressible viscous flowslink 설안숙; Sul, An-Sook; et al, 한국과학기술원, 2013 |
2060 | 압축성 점성 유동에서의 국소 예조건화 기법의 개선에 대한 연구 = A study on enhancement of local preconditioning method for compressible viscous flowslink 이재은; Lee, Jae-Eun; et al, 한국과학기술원, 2011 |
2061 | 압축성 효과를 고려한 상관관계 기반 교차유동 천이 모델에 관한 연구 = (A) study on a correlation-based crossflow transition model considering compressibility effectlink 한재성; 권오준; et al, 한국과학기술원, 2022 |
2062 | 압축성형된 SMC 경량 구조재의 표면정도 향상에 관한 연구 = A study for surface grade improvement of light-weight structural parts of compression molded sheet molding compoundslink 정진호; Jeong, Jin-Ho; et al, 한국과학기술원, 1996 |
2063 | 압축하중을 받는 NiTi 형상기억합금의 양방향 작동 특성 및 상변태 모델링에 관한 연구 = A study on the two-way actuating characteristics and martensite transformation kinetics modelling of NiTi shape memory alloy under compressionlink 유영익; Yoo, Young-Ik; et al, 한국과학기술원, 2012 |
2064 | 액상 분사식 액화석유가스 엔진의 배기가스재순환 적용 연구 = EGR applications in a liquid phase LPG injection enginelink 우영민; Woo, Young-min; et al, 한국과학기술원, 2007 |
2065 | 액체 공기 에너지 저장 시스템에 사용되는 냉열 저장소의 열적 성능 연구 = Thermal performance study of thermal energy storage unit used in liquid air energy storage systemlink 김경중; Kim, Kyoung Joong; et al, 한국과학기술원, 2024 |
2066 | 액체 연료 스크램젯 엔진 모델의 설계 및 성능 평가 = Design and performance evaluation of a liquid-fueled scramjet engine modellink 양인영; Yang, Inyoung; et al, 한국과학기술원, 2013 |
2067 | 액체 추진제 로켓엔진의 혼합비 안정기 설계와 특성 연구 = Study on design and characteristics of mixture ratio stabilizer for liquid propellant rocket enginelink 정태규; Jung, Tae-Kyu; et al, 한국과학기술원, 2009 |
2068 | 액체로켓 추진기관에서의 액체산소 과냉각에 대한 연구 = Study on the subcooling of liquid oxygenlink 조남경; Cho, Nam-Kyung; et al, 한국과학기술원, 2007 |
2069 | 액체연료 이중 스월 분무화염의 연소 불안정 실험적 연구 = Experimental investigation of combustion instabilities of liquid-fueled dual-swirl spray flameslink 김명호; 김규태; et al, 한국과학기술원, 2022 |
2070 | 액화석유가스 직접분사 전기점화엔진에서 희박조건 연소 및 배기 = Combustion and emission characteristics of liquefied petroleum gas under lean conditionlink 정진영; Jung, Jin young; et al, 한국과학기술원, 2017 |
2071 | 양자점-탄소나노튜브 나노 하이브리드 구조체를 이용한 광전 소자의 제작 및 특성 평가에 관한 연구 = A study on fabrication and characterization of optoelectronic device using nanocrystal quantum dot-carbon nanotube hybrid structureslink 심형철; Shim, Hyung-Cheoul; et al, 한국과학기술원, 2010 |
2072 | 양코로나 방전을 수반하는 사각 관성충돌기에서의 정전 유동장과 입자부착 = Electrohydrodynamic flow and particle deposition in the rectangular impactor with positive corona dischargelink 정상현; Jeong, Sang-Hyeon; et al, 한국과학기술원, 1998 |
2073 | 에너지법에 의한 박판 성형공정의 해석에 관한 연구 = Study on the analysis of sheet metal forming processes by the energy methodlink 이항수; Lee, Hang-Soo; et al, 한국과학기술원, 1991 |
2074 | 에지와 코너 검지를 위한 새로운 영상 처리 알고리즘 개발과 용접 자동화로의 적용 = Development of new low level processing algorithm for edge and corner detection and application to welding automationlink 배순철; Bae, Sun-Cheol; et al, 한국과학기술원, 2003 |
2075 | 에탄올-메틸셀룰로오스 젤의 자발화 및 연소 특성에 관한 실험적 연구 = Experimental study of autoignition and combustion characteristics of an ethanol-methylcellulose gel dropletlink 이동기; 백승욱; et al, 한국과학기술원, 2019 |
2076 | 엔진유 및 자동변속기유 설계에 미치는 윤활 기유의 영향 = Effects of base oil characteristics in engine oils and automatic transmission fluids designlink 권완섭; Kwon, Wan-Seop; et al, 한국과학기술원, 2006 |
2077 | 여러층의 층간분리가 있는 복합재 적층판의 좌굴 및 좌굴후 거동 = Buckling and postbuckling behavior of composite laminated panels with multiple delaminationslink 경우민; Kyoung, Woo-Min; et al, 한국과학기술원, 1998 |
2078 | 여유 구동 기구에 의한 능동 강성과 충격 외란 제어 = Control of active stiffness and impact sisturbance by redundantly actuated mechanismlink 이상헌; Lee, Sang-Heon; et al, 한국과학기술원, 2001 |
2079 | 여유자유도 매니퓰레이터의 가속 성능에 관한 연구 = A study on acceleration performance of redundant manipulatorlink 심익찬; Shim, Ick-Chan; et al, 한국과학기술원, 1998 |
2080 | 역 투시 변환을 이용한 스테레오 비젼 알고리즘에 관한 연구 = A Study on the stereo vision algorithm using inverse perspective transformationlink 조용철; Cho, Yong-Chul; et al, 한국과학기술원, 1992 |
2081 | 역학일 분석을 통한 보행 메커니즘 고찰 = Study of human walking mechanism based on mechanical work analysis : young, elderly, and OA patientslink 박희원; Park, Hee Won; et al, 한국과학기술원, 2015 |
2082 | 연료 분사 전략이 대형 디젤 엔진 연소 성능에 미치는 영향 = The effect of fuel injection strategies on combustion characteristics in a heavy-duty diesel enginelink 이진우; Lee, Jin-Woo; et al, 한국과학기술원, 2011 |
2083 | 연료공급조건에 따른 고압디젤연료 분무특성 = Spray characteristics of high pressure diesel injection with regard to fuel injection equipmentslink 강진석; Kang, Jin-Suk; et al, 한국과학기술원, 2003 |
2084 | 연료분무 및 유동장에 따른 직접분사식 가솔린 엔진 특성에 관한 연구 = The interaction between fuel spray and flow in direct-injection spark ignition enginelink 최재준; Choi, Jae-Joon; et al, 한국과학기술원, 2005 |
2085 | 연료전지 배터리 태양전지를 이용한 무인기용 복합 전기추진 시스템 개발 = Development of a hybrid electrical propulsion system for unmanned aerial vehicles combining the fuel cell with a battery and solar cellslink 강병규; Gang, Byeong Gyu; et al, 한국과학기술원, 2016 |
2086 | 연삭공정에 있어서 자려진동 해석 및 임펙트 뎀퍼의 효과에 관한 연구 = A study of self-excited vibratition and impact damper in grinding processlink 김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1983 |
2087 | 연소불안정과 교란에너지에 관한 연구 = A study on Combustion Instability and Disturbance Energylink 김현준; Kim, Hyeon Jun; et al, 한국과학기술원, 2010 |
2088 | 연속식 용융아연도금 공정에서의 단부 과도금 현상과 표면 얼룩무늬 현상을 해결하기 위한 공기역학적 연구 = Aerodynamic investigation of air knife system to resolve the edge overcoating and check mark in a continuous hot-dip galvanizing processlink 안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2006 |
2089 | 열 하중을 받고 있는 다층구조물에 대한 열 기계적 해석과 파괴역학의 적용 = Thermomechanical and fracture mechanical analysis of multilayered structure subjected to thermal loadinglink 임지혁; Lim, Ji-Hyuk; et al, 한국과학기술원, 2001 |
2090 | 열-기계적 접촉 문제의 상보성 수식화 = Formulation of thermo-mechanical contact based on complementarity relationslink 박준; Park, Jun; et al, 한국과학기술원, 1994 |
2091 | 열-점소성 유한요소법을 이용한 대형단조에서의 기공압착해석에 관한 연구 = Analysis of void crushing in the large forging using the thermo-viscoplastic finite element methodlink 박치용; Park, Chi-Yong; et al, 한국과학기술원, 1996 |
2092 | 열간 압출 공정의 평금형 설계를 위한 규칙 기반 설계 시스템 개발 = Deveopment of rule-based design system for flat die design of hot extrusion processlink 이근안; Lee, Geun-An; et al, 한국과학기술원, 2001 |
2093 | 열간압연공정의 루퍼제어시스템 개선을 위한 장력과 롤 속도 제어 퍼지 알고리즘 = Fuzzy algorithm for improvement of looper control system in hot rolling based on tension and roll speed controllink 정종엽; Jung, Jong-Yeob; et al, 한국과학기술원, 1998 |
2094 | 열복사를 고려한 미분탄의 연소 및 NOx 배출 현상에 관한 연구 = Investigation of combustion and NOx emission characteristics for pulverized coal with radiation effectslink 유명종; Yu, Myoung-Jong; et al, 한국과학기술원, 2000 |
2095 | 열성층배관 Thermal striping 영역에 존재하는 균열의 거동에 관한 연구 = A study on the behavior of a crack located at thermal striping zone in thermally stratified pipelink 이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1993 |
2096 | 열을 발생하는 용융물에 대한 냉각전략의 비교연구 = (A) comparative study of cooling strategies for volumetrically heat-generating molten materialslink 나한비; Na, Hanbee; et al, 한국과학기술원, 2017 |
2097 | 열음향 진동에 관한 연구 = A study on the thermoaxoustic oscillationlink 권영필; Kwon, Young-Pil; et al, 한국과학기술원, 1986 |
2098 | 열적 기계적 하중이 작용하는 구조물의 비탄성 해석과 수명 예측 = Inelastic analysis and life prediction for structures subject to thermomechanical loadinglink 윤삼손; Yoon, Sam-Son; et al, 한국과학기술원, 2003 |
2099 | 열전달을 고려한 스크롤 압축기내의 열역학적 냉매압축과정에 대한 연구 = Study on the thermodynamic compression process of refrigerant in the scroll compressor with heat transfer effectlink 장기태; Jang, Ki-Tae; et al, 한국과학기술원, 2006 |
2100 | 열하중 조건하의 임의 곡선 균열에 대한 보존 적분에 관한 연구 = A study on a conservation integral for arbitrarily curved cracks under thermal loadinglink 정해동; Chung, Hae-Dong; et al, 한국과학기술원, 1997 |