Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject 피로

Showing results 1 to 8 of 8

1
316L 스테인레스 강의 동적변형시효와 고온 저주기 피로특성에 미치는 질소의 영향 = Effect of nitrogen on dynamic strain ageing and high temperature low cycle fatigue properties in type 316L stainless steellink

김대환; Kim, Dae-Whan; et al, 한국과학기술원, 1998

2
316L 스테인리스강의 모재부와 용접부의 고온저주기피로 시 미세구조변화와 파괴특성연구 = The study on the microstructure evolution and fracture behaviors during low cycle fatigue at elevated temperature for base metal and weldment of 316L stainless steellink

정재규; Jung, Jae-Gyu; et al, 한국과학기술원, 2004

3
Al-6Si-3Cu-(Fe)-(Mn)합금에서 Fe계 금속간화합물의 형상변화가 피로균열전파 거동에 미치는 영향 = Effects of morphology change of Fe base intermetallics on the fatigue crack propagation behavior in Al-6Si-3Cu-(Fe)-(Mn) Alloylink

박건욱; Park, Kun-Uk; et al, 한국과학기술원, 1997

4
Al-Zn-Mg계 합금에서 상온 피로변형 중 하중 조건에 따른 Mn-분산상 주위에서의 전위 cross-slip거동 = The effect of loading condition on the dislocation cross-slip at the Mn-dispersoid during fatigue at low temperature in Al-Zn-Mg alloylink

우윤성; Woo, Yun-Sung; et al, 한국과학기술원, 1999

5
Lamellar 조직을 갖는 TiAl 금속간화합물의 고온 저주파 피로 특성에 대한 탄소 첨가의 효과 = The effects of carbon addition on the high temperature low cycle fatigue property in lamellar structured tial alloylink

안우송; Ahn, Woo-Song; et al, 한국과학기술원, 2001

6
Sb 첨가를 통한 PZT박막의 electrical degradation mechanism에 관한 연구 = A study on the electrical degradation mechanism in PZT thin films by Sb additionlink

최원열; Choi, Won-Youl; et al, 한국과학기술원, 1998

7
SMAW으로 제조된 P122강 용접부의 고온 저주파 피로수명에 미치는 인장유지시간의 영향 = The effect of tensile hold time on the high temperature low cycle fatigue properties of P122 steel weldment produced by shield metal arc welding processlink

박성환; Park, Sung-Hwan; et al, 한국과학기술원, 2002

8
크리프-피로 상호작용시 AISI 316스테인레스강에서 cavity 생성인자에 미치는 결정립도의 영향 = The effect of grain size on the cavity nucleation factor of AISI 316 stainless steel under creep-fatigue interactionlink

노범욱; Roh, Bum-Wook; et al, 한국과학기술원, 1996

rss_1.0 rss_2.0 atom_1.0