Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject 크리프

Showing results 1 to 14 of 14

1
11%CrMoVNb 강의 크리프 성질에 미치는 템퍼링 열처리의 영향 = Effects of tempering heat treatment on the creep properties of a 11%CrMoVNb steellink

이영수; Lee, Young-Soo; et al, 한국과학기술원, 2001

2
Advanced 9-12% Cr 강의 크리프 파단강도에 미치는 합금원소의 영향 = Effects of alloying elements on the creep rupture strength of advanced 9-12% Cr steelslink

류석현; Ryu, Seog-Hyeon; et al, 한국과학기술원, 1998

3
Atomic configuration model with emitting dislocations in the ${α_2}$ /γ by ${α_2}$ to γ phase transformation during creep deformation in the lamellar TiAl alloy = Lamellar TiAl 합금의 크리프시 ${α_2}$ 에서 γ로의 상변태와 계면에서의 방출전위를 위한 원자 단위의 모델링link

Jung, He-Jin; 정혜진; et al, 한국과학기술원, 2003

4
Cu 또는 Bi 첨가가 Sn-3.5Ag계 무연 솔더 합금의 크리프 특성에 미치는 영향 = Effects of Cu or Bi addition to the creep properties of Sn-3.5Ag based lead-free solder alloyslink

신승우; Shin, Seung-Woo; et al, 한국과학기술원, 2003

5
Lamellar 구조 TiAl 합금에서 lamellar spacing의 변화에 따른 크리프 변형기구에 대한 연구 = A study on the creep deformation mechanism of the lamellar TiAl alloys with lamellar spacinglink

배양호; Bae, Yang-Ho; et al, 한국과학기술원, 1999

6
Lamellar 구조 TiAl합금의 primary 크리프 변형기구에 대한 연구 = A study on the primary creep deformation mechanism of the lamellar TiAl alloyslink

조한서; Cho, Han-Seo; et al, 한국과학기술원, 1999

7
Sn-(0.7Cu)-x 솔더 조인트의 크리프 특성 (x = Bi, Sb, Zn, 그리고 In)link

김성범; Kim, Sung-Bum; et al, 한국과학기술원, 2004

8
Sn-Bi-Ag계 무연솔더의 기계적 성질 = Mechanical properties of Sn-Bi-Ag lead-free solderlink

윤종문; Yoon, Jong-Moon; et al, 한국과학기술원, 1996

9
Ti-1100 및 IMI834 합금에서 최적 크리프-피로 특성을 위한 최적의 미세조직 제어에 관한 연구 = A study on the microstructural control for the optimum creep-fatigue characteristics in the Ti-1100 and IMI834 alloyslink

이덕희; Lee, Duck-Hee; et al, 한국과학기술원, 2000

10
$Ti_2AlNb$ 기지 합금과 TiB 분산강화 복합재료의 크리프 변형기구 천이현상에 관한 연구 = A study on the transition of creep deformation mechanism in $Ti_2AlNb$ alloy and TiB particulate compositelink

양승진; Yang, Seung-Jin; et al, 한국과학기술원, 2004

11
TiAl계 금속간화합물의 고온변형특성과 가공열처리에 의한 미세조직제어 = High temperature deformation behavior and microstructure control by thermomechanical treatment of the TiAl-base intermetallic compoundslink

김희영; Kim, Hee-Young; et al, 한국과학기술원, 1998

12
무연솔더의 크리프에 미세구조와 솔더볼 형상이 미치는 영향에 관한 연구 = Effects of microstructure and solder ball geometry on creep deformation of lead-free solderlink

김성범; Kim, Sung-Bum; et al, 한국과학기술원, 2011

13
미세조직이 무연 솔더의 크리프 성질에 미치는 영향 = The effect of microstructure on the creep behavior of the lead-free solderslink

주대권; Joo, Dae-Kwon; et al, 한국과학기술원, 2002

14
입자강화형 타이타니움기 복합재료의 크리프 변형거동과 손상기구에 관한 연구 = A study on the creep deformation behavior and damage mechanism of particleate-reinforced ti based compositelink

이상인; Rhee, Sang-In; et al, 한국과학기술원, 2004

rss_1.0 rss_2.0 atom_1.0