Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Ph.D)

Showing results 121 to 140 of 1285

121
(A) study on the synthesis of catalyst functionalized $WO_3$ nanofibers networks for exhaled breath gas analysis and their gas sensing characterization = 날숨 가스 분석을 위한 촉매가 기능화 된 텅스텐 산화물 나노섬유 망상 구조 합성 및 가스센서 특성평가에 관한 연구link

Kim, Nam-Hoon; Kim, Il-Doo; et al, 한국과학기술원, 2017

122
(A) study on the thermal properties of underfill in flip-chip package = 플립칩용 언더필의 열적물성에 관한 연구link

Lee, Woong-Sun; 이웅선; et al, 한국과학기술원, 2005

123
(A) study on the two-step atomic layer deposition for TaN thin films = Two-step ALD 법을 이용한 TaN 박막 형성에 관한 연구link

Kwon, Jung-Dae; 권정대; et al, 한국과학기술원, 2007

124
(A) study on the ultra-thin copper film formation by chemical vapor deposition = CVD법을 이용한 ultra-thin 구리 박막 형성에 관한 연구link

Kwak, Dong-Kee; 곽동기; et al, 한국과학기술원, 2007

125
(A) study on thermal and electrical conductivity characterization of aluminum nitride = 질화알루미늄의 열 및 전기전도도 특성에 관한 연구link

Lee, Hyeon-Keun; 이현근; et al, 한국과학기술원, 2010

126
(A) study on thermally stable ultra-high density granular type = 열적으로 안정한 과립형 초고밀도 수직자기기록매체에 관한 연구link

Park, Sang-Hwan; 박상환; et al, 한국과학기술원, 2008

127
(A) study on thin film encapsulation and transistor-based biosensor for the high performance flexible device = 고성능 유연 소자를 위한 박막 봉지 및 트랜지스터 기반 바이오센서 연구link

Kim, Jin-Gyu; Park, Sang-Hee; et al, 한국과학기술원, 2023

128
(A) transmission electron microscopy study on the crystallization of $Ge_2Sb_2Te_5$ thin films deposited by sputtering method = 스퍼터링 방법으로 증착된 $Ge_2Sb_2Te_5$ 박막의 결정화에 관한 투과전자현미경 연구link

Park, Yu-Jin; 박유진; et al, 한국과학기술원, 2006

129
(A) transmission electron microscopy study on the crystallization of amorphous $SrBi_2Nb_2O_9$ thin films dposited by metalorganic decomposition = 유기금속 분해에 의해 증착된 비정질 $SrBi_2Nb_2O_9$ 박막의 결정화에 관한 투과전자현미경 연구link

Yoo, Dong-Chul; 유동철; et al, 한국과학기술원, 2004

130
(A) transmission electron microscopy study on the crystallization of amorphous $SrBi_2Ta_2O_9$ thin films deposited by metalorganic decomposition = 유기금속 분해에 의해 증착된 비정질 $SrBi_2Ta_2O_9$ 박막의 결정화에 관한 투과전자현미경 연구link

Choi, Jae-Hyoung; 최재형; et al, 한국과학기술원, 2000

131
(A) transmission electron microscopy study on the crystallization of low pressure chemical vapor deposition amorphous silicon thin films = 저압화학증착된 비정질 실리콘 박막의 결정화에 관한 투과전자현미경 연구link

Kim, Jin-Hyeok; 김진혁; et al, 한국과학기술원, 1996

132
$AB_5$, $AB_2$ 형 금속간화합물의 수소 흡수-방출 싸이클링에 의한 intrinsic degradation에 관한 연구 = A study on the intrinsic degradation of $AB_5$, $AB_2$ type intermetallic compounds upon hydrogen absorption-desorption cyclinglink

안효준; Ahn, Hyo-Jun; et al, 한국과학기술원, 1991

133
Acoustic Emission 기법에 의한 (Pb,La)$TiO_3$ 강유전체 세라믹스의 광여기 분역 반전에 관한 연구 = Study on photoinduced domain switching in (Pb,La)$TiO_3$ ferroelectric ceramics by acoustic emission techniquelink

최동구; Choi, Dong-Gu; et al, 한국과학기술원, 1999

134
Advanced 9-12% Cr 강의 크리프 파단강도에 미치는 합금원소의 영향 = Effects of alloying elements on the creep rupture strength of advanced 9-12% Cr steelslink

류석현; Ryu, Seog-Hyeon; et al, 한국과학기술원, 1998

135
Ag, Ag-Sn, Ag-Sn-Cu 계의 아말감반응에 관한 연구 = A study on the amalgamation reaction un Ag, Ag-Sn, andAg-Sn-Cu systemlink

이규환; Lee, Kyu-Hwan; 이재영; 신명철; et al, 한국과학기술원, 1986

136
Ag, Cu) 삼원계 단결정에서 강화기구에 관한 연구 = Al-Li-X(Xlink

이병찬; Lee, Byeong-Chan; et al, 한국과학기술원, 1997

137
Ag-Pd-In 합금의 미세구조 및 기계적 성질에 미치는 첨가원소의 영향 = The effects of addition elements on the microstructures and mechanical properties of Ag-Pd-In alloyslink

서용찬; Suh, Yong-Chan; et al, 한국과학기술원, 1998

138
AIAI 304 및 304L 스테인리스강의 입계 석출물이 크립-피로 상호작용에 미치는 영향 = Effects of grain boundary ppt on creep-fatigue interaction in AISI 304 and 304L stainless steellink

이제민; Lee, Je-Min; et al, 한국과학기술원, 1991

139
AISI 304L 스탠레스 상의고온 저주파 피로시험시 피로 거동에 미치는 동적 변형 시효의 영향 = The effects of dynamic strain ageing on the low-cycle fatigue behaviors at high temperature for the AISI 304L stainless steellink

김동제; Kim, Dong-Jee; et al, 한국과학기술원, 1988

140
AISI 316 스테인리스강에서 발생하는 입계 serration에 영향을 미치는 인자 고찰 및 발생 기구 규명 = An investigation of the factors affecting the occurrence of the grain boundary serration and the grain boundary serration mechanism in AISI 316 stainless steellink

김기재; Kim, Ki-Jae; et al, 한국과학기술원, 2004

rss_1.0 rss_2.0 atom_1.0