Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Title 

Showing results 1181 to 1200 of 19240

1181
Al-Zn-Mg 합금 용접부위의 응력 부식 성질에 관한 연구 : 입열 속도, 용접후 열처리 조건의 효과와 응력 부식기구에 관한 연구 = Stress corrosion brhaviour of Al-Zn-Mg weldments-effects of heat input rate and postweld heat treatment and contribution to the study of stress corrosion mechanismlink

김용석; Kim, Yong-Seog; et al, 한국과학기술원, 1982

1182
Al-Zn-Mg 합금에서 center notched specimen 을 이용한 부식피로 균열 전파 거동에 대한 속도론적인 연구 = Kinetics of corrosion fatigue crack propagation behaviour of Al-Zn-Mg alloy using a center notched specimenlink

장진영; Jang, Jin-Young; et al, 한국과학기술원, 1986

1183
Al-Zn-Mg 합금에서 Cr이 기계적 성질에 미치는 영향에 관한 연구 = A study on the effect of Cr on mechanical properties in an Al-Zn-Mg alloylink

전주매; Jeon, Ju-Mae; et al, 한국과학기술원, 1991

1184
Al-Zn-Mg 합금에서 single edge notched 시편을 사용한 부식피로 균열전파 거동에 미치는 응력비와 응력 주파수의 영향 = Effects of stress ratio and stress frequency on the corrosion fatigue crack propagation behaviour of Al-Zn-Mg alloy by using single edge notched specimenlink

전영갑; Chun, Young-Gab; et al, 한국과학기술원, 1989

1185
Al-Zn-Mg 합금에서 응력부식파괴와 부식피로의 기구와 속도론에 대한 연구 = A study on the mechanism and kinetics of stress-corrosion cracking and corrsion-fatigueprodesses of Al-Zn-Mg alloyslink

김홍표; Kim, Hong-Pyo; et al, 한국과학기술원, 1988

1186
Al-Zn-Mg 합금에서의 응력부식기구에 대한 고찰

변수일, Korean Corros. Sci. Soc., pp.7 - 7, 1984

1187
Al-Zn-Mg 합금의 응력 부식 균열 생성과 전파 단계에 미치는 수소재결합 억제재의 영향에 관한 연구 = Effects of hydrogen recombination poisoners on the stress corrosion crack initiation and propagation of Al-Zn-Mg alloyslink

송락현; Song, Lak-Hyun; et al, 한국과학기술원, 1986

1188
Al-Zn-Mg-(Mn) 합금의 파괴인성에 미치는 Mn-dispersoid와 가공열처리의 영향 = Effect of Mn-dispersoid and thermomechanical treatment on the fracture toughness in Al-Zn-Mg-(Mn) alloylink

이덕희; Lee, Duck-Hee; et al, 한국과학기술원, 1995

1189
Al-Zn-Mg-Cu 합금에서 시효경화 조건이 전기화학적 부식 및 응력 부식 특성에 미치는 영향

변수일, Korean Corros. Sci. Soc., pp.1 - 1, 1981

1190
Al-Zn-Mg-Mn 합금에서 부식 피로의 균열 닫힘에 미치는 환경의 영향 = Environmental effects on the crack closure of corrosion fatigue in an Al-Zn-Mg-Mn alloylink

오승진; O, Seung-Jin; et al, 한국과학기술원, 1994

1191
Al-Zn-Mg-Mn 합금의 저주기 피로 특성연구 = A study on low cycle fatigue in Al-Zn-Mg-Mn alloylink

유성태; You, Seoung-Tae; et al, 한국과학기술원, 1990

1192
Al-Zn-Mg-Mn 합금의 저주기 피로성질에 미치는 가공열처리의 영향에 관한 연구 = A study on the effect of thermomechanical treatment on the low cycle fatigue properties in AL-Zn-Mg-Mn alloylink

이호도; Lee, Ho-Do; et al, 한국과학기술원, 1993

1193
Al-Zn-Mg-Mn-Zr계 합금의 저주기 피로성질에 미치는 분위기의 영향 = Effect of environments on the low cycle fatigue in Al-Zn-Mg-Mn-Zr alloylink

조한서; Cho, Han-Seo; et al, 한국과학기술원, 1993

1194
Al-Zn-Mg-Zr-(Mn)합금에서 피로균열 전파거동에 미치는 무석출대와 Mn-분산상의 영향 = Effects of precipitate free zone and Mn-dispersoid on the fatigue crack propagation behavior in Al-Zn-Mg-Zr-(Mn) alloylink

조봉래; Jo, bong-Lae; et al, 한국과학기술원, 1994

1195
Al-Zn-Mg계 합금에서 Mn-분산상이 피로변형기구에 미치는 영향 = Effect of Mn-dispersoid on the fatigue mechanism in Al-Zn-Mg alloylink

김규철; Kim, Kyu-Cheol; et al, 한국과학기술원, 1997

1196
Al-Zn-Mg계 합금에서 상온 피로변형 중 하중 조건에 따른 Mn-분산상 주위에서의 전위 cross-slip거동 = The effect of loading condition on the dislocation cross-slip at the Mn-dispersoid during fatigue at low temperature in Al-Zn-Mg alloylink

우윤성; Woo, Yun-Sung; et al, 한국과학기술원, 1999

1197
AL-ZN-MG계 합금의 변형기구에 미치는 Mn-분산상의 영향 = Effects of MN-dispersoid on the deformation mechanism in AL-ZN-MG alloyslink

공병욱; Kong, Byeong-Ook; et al, 한국과학기술원, 1996

1198
Al-Zn-Sn-O Thin Film Transistors with Top and Bottom Gate Structure for AMOLED

Cho, Doo-Hee; Park, Sang-Hee Ko; Byun, Chunwon; Ryu, Min Ki; Yang, Shinhyuk; Hwang, Chi-Sun; Yoon, Sung Min; et al, IEICE TRANSACTIONS ON ELECTRONICS, v.E92C, no.11, pp.1340 - 1346, 2009-11

1199
Al/Al2 O3 계면의 젖음특성 및 계면반응

권순용; 정대영; 최시경; 구형회; 이종수, 한국세라믹학회지, v.31, no.8, pp.815 - 822, 1994-08

1200
Al/Ti 합금의 브레이징 기구와 계면특성 = Brazing mechanism and interface characteristics of Al/Ti brazed alloyslink

봉하헌; Bong, Ha-Heon; 홍순형; Hong, Soon-Hyung; et al, 한국과학기술원, 1999

rss_1.0 rss_2.0 atom_1.0