DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이상호 | - |
dc.contributor.author | 양동열 | - |
dc.contributor.author | 안동규 | - |
dc.contributor.author | 김효찬 | - |
dc.contributor.author | 송민섭 | - |
dc.contributor.author | 박승교 | - |
dc.date.accessioned | 2013-03-18T19:58:31Z | - |
dc.date.available | 2013-03-18T19:58:31Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2004 | - |
dc.identifier.citation | 한국 CAD/CAM 2004년 학술대회, v., no., pp.509 - 513 | - |
dc.identifier.uri | http://hdl.handle.net/10203/151936 | - |
dc.description.abstract | In the semi-automatic VLM-ST process, a material in the form of a plate is cut into a Unit Shape Layer (USL) with thick layers and sloping surfaces in accordance with a CAD model using a four-axis synchronized hotwire cutter and each USL is then bonded together by hand and stacked with the aid of a building board and a pilot pin. As a result of repetition of this process, a three-dimensional part is rapidly fabricated. The available model size of the semi-automatic VLM-ST apparatus is 200 mm × 180 mm in a plane and the maximum building height of the model is not limited. Because the semi-automatic VLM-ST process uses thick-layered materials and is not limited in height, it is possible to fabricate rapidly the object larger than 600 mm high. This paper describes the fast fabrication of large-sized physical model from aerial-photographing 3D terrain data using the semi-automatic VLM-ST process in connection with the reverse engineering technology. The terrain model is 1050 mm × 637 mm × 160 mm in size and its reduced scale is 1 to 10,000. From the fabricated physical model from aerialphotographing 3D terrain Data, it has been shown that the semi-automatic VLM-ST process in connection with the reverse engineering technology is such a fast and efficient process that a large object can be manufactured easily in comparison with the other existing RE-RP connected manufacturing systems. | - |
dc.language | KOR | - |
dc.publisher | 한국 CAD/CAM 학회 | - |
dc.title | 역 엔지니어링과 VLM-ST 공정을 이용한 항공촬영 3차원 지형 데이터로부터 대형 축척 모형 제작 | - |
dc.type | Conference | - |
dc.type.rims | CONF | - |
dc.citation.beginningpage | 509 | - |
dc.citation.endingpage | 513 | - |
dc.citation.publicationname | 한국 CAD/CAM 2004년 학술대회 | - |
dc.identifier.conferencecountry | South Korea | - |
dc.identifier.conferencecountry | South Korea | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 이상호 | - |
dc.contributor.nonIdAuthor | 안동규 | - |
dc.contributor.nonIdAuthor | 김효찬 | - |
dc.contributor.nonIdAuthor | 송민섭 | - |
dc.contributor.nonIdAuthor | 박승교 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.