42 | Box-jenkins 법에 의한 화장품의 단기수요 예측 = A short term demand forecasting of cosmetic products by box-jenkins methodologylink 양삼주; Yang, Sam-Ju; 염봉진; 성창섭; et al, 한국과학기술원, 1986 |
43 | CALIBRATION PROCEDURES WHEN BOTH MEASUREMENTS ARE SUBJECT TO ERROR - A COMPARATIVE SIMULATION STUDY OF THE UNREPLICATED CASE Yum, Bong-Jin; LEE, SH, COMPUTERS INDUSTRIAL ENGINEERING, v.20, no.4, pp.411 - 420, 1991 |
44 | CDMA 이동통신을 위한 용량 평가 및 핸드오프 영역 설계 = Capacity evaluation and soft handoff area design for CDMA mobile communication systemlink 조현창; Cho, Hyun-Chang; et al, 한국과학기술원, 1995 |
45 | Classification Using the Patterns Generated from the Logical Analysis of Data Yum, Bong-Jin; Han, J; Kim, N; Jeong, MK, APIEMS 2009, pp.1562 - 1569, 2009 |
46 | Collaborative filtering based on iterative principal component analysis Kim, D; Yum, Bong-Jin, EXPERT SYSTEMS WITH APPLICATIONS, v.28, pp.823 - 830, 2005-05 |
47 | Collaborative Filtering Based on principal Component Analysis and EM Algorithm Kim, DH; Yum, Bong-Jin, The 4th ARS Conference of the IASC, Serial. 4, pp.1 - 4, 2002-12 |
48 | Comparison of Constant- and Step-Stress Accelerated Degradation Test Plans Yum, Bong-Jin; Lim, H, INFORMS Annual Meeting, 2008 |
49 | Comparisons of acceptance sampling plans under type-II censoring and nonrepalcement for items with exponential lifetime distribution = Type-II censoring 과 비복원하에서 지수수명분포를 갖는 제품에 대한 합격판정샘플링 계획의 비교연구link Jeong, Hyeon-Seok; 정현석; et al, 한국과학기술원, 1990 |
50 | Comparisons of classification methods in the original and pattern spaces Han, Jeong; Kim, Norman; Jeong, Myong K.; Yum, Bong-Jin, EXPERT SYSTEMS WITH APPLICATIONS, v.38, no.10, pp.12432 - 12438, 2011-09 |
51 | Comparisons of classification methods in the original and pattern spaces and development of new pattern selection approaches for the logical analysis of data = 원래의 영역과 패턴 영역에서의 분류 기법 비교와 LAD의 패턴 선택 방법 개발link Han, Jeong; 한정; et al, 한국과학기술원, 2010 |
52 | Comparisons of exponential life test plans with intermittent inspections Kim, SH; Yum, Bong-Jin, JOURNAL OF QUALITY TECHNOLOGY, v.32, no.3, pp.217 - 230, 2000-07 |
53 | Comparisons of Homogeneity Criteria for Multi-Objective Decision Trees Lee, SH; Kim, DH; Yum, Bong-Jin, Asia Pacific Management Conference, pp.77 - 84, 2003-11 |
54 | Comparisons of Loss Function and Multivariate PCI-Based Approaches for Solving Multi-Characteristic Parameter Design Problems Kim, KW; Yum, Bong-Jin; Lee, PH, The 10th Annual International Conference on Industrial Engineering, 2005-12-01 |
55 | Comparisons of optimal accelerated test plans for estimating quantiles of lifetime distribution at the use condition Park, JI; Yum, Bong-Jin, ENGINEERING OPTIMIZATION, v.31, no.3, pp.301 - 328, 1999 |
56 | Comparisons of populations in life testing = 수명검사에서 감마(gammar) 분포를 따르는 모집단들의 비교에 관한 연구link Yim, Sang-Mo; 임상모; et al, 한국과학기술원, 1988 |
57 | Comparisons of Principal Component Analysis and Singular Value Decomposition Method for Collaborative Filtering Kim, D; Yum, Bong-Jin, Annual Conference of Gesellschaft fur Klassifikation, pp.114 - 114, 2002-07-01 |
58 | Comparisons of rule induction methods for statistical data = 통계자료로부터의 지식획득방법에 대한 비교link Kim, Joon-Ha; 김준하; et al, 한국과학기술원, 1988 |
59 | Comparisons of statistical calibration procedures when the standard measurement is also subject to error = 표준측정치의 오차를 고려한 통계적 계기 교정법의 비교 연구link Lee, Seung-Hoon; 이승훈; et al, 한국과학기술원, 1990 |
60 | Confidence intervals following sequential tests = 축차검정과 관련된 신뢰구간의 결정에 관한 연구link Lee, Sang-Hoon; 이상훈; Bai, Do-Sun; Yum, Bong-Jin; et al, 한국과학기술원, 1985 |
61 | Construction of exact D-optimal designs by tabu search Jung, JS; Yum, Bong-Jin, COMPUTATIONAL STATISTICS DATA ANALYSIS, v.21, no.2, pp.181 - 191, 1996-02 |
62 | Contributions to reliability data analysis : comparison of distribution selection procedures and development of two-dimensional warranty data analysis methods = 신뢰성 데이터 분석에 관한 연구 : 분포 선택방법의 비교와 이차원 보증데이터 분석방법 개발link Kim, Jin-Seon; 김진선; et al, 한국과학기술원, 2009 |
63 | Control charts for random and fixed components of variation in the case of fixed wafer locations and measurement positions Kim, KS; Yum, Bong-Jin, IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, v.12, no.2, pp.214 - 228, 1999-05 |
64 | Control charts for random and fixed components of variation in the case of split-unit structure of data = 데이터의 분할구조하에서 변량적 변동과 고정적 변동 성분에 대한 관리도의 개발link Kim, Kil-Soo; 김길수; et al, 한국과학기술원, 1999 |
65 | Decision Tree Analysis of Process Monitoring Data Kim, SJ; Kim, YS; Yum, Bong-Jin, Asia Pacific Management Conference, pp.95 - 102, 2003-11-01 |
66 | Design of accelerated degradation tests based on stochastic process models = 추계적 과정 모형 하에서의 가속 열화 시험의 설계link Lim, Heon-Sang; 임헌상; et al, 한국과학기술원, 2010 |
67 | Design of accelerated degradation tests for reliability assessment = 신뢰성 평가를 위한 가속 열화 시험의 설계link Park, Jong-In; 박종인; et al, 한국과학기술원, 1998 |
68 | Design of Accelerated Life Tests under Competing Models Yum, Bong-Jin, APORS'88, pp.0 - 0, 1988 |
69 | Design of accelerated life tests under cyclic-stress loading = 주기적인 스트레스 하에서 가속 수명 시험의 설계link Kim, Seung-Hyun; 김승현; et al, 한국과학기술원, 2011 |
70 | Design of accelerated tests under varying stress = 변동 스트레스하에서의 가속시험 설계link Park, Sang-Jun; 박상준; et al, 한국과학기술원, 2000 |
71 | Design of Reliability Acceptance Sampling Plans Based on Accelerated Degradation Tests Yum, Bong-Jin; Park, Jong-In, ASIA PACIFIC MANAGEMENT REVIEW, v.6, no.4, pp.461 - 476, 2001-01 |
72 | Determination and utilization of minimal upper paths for reliability analysis of planar flow networks = 플래너 흐름 네트워크의 신뢰도 분석을 위한 최소상위경로의 결정 및 활용에 관한 연구link Lee, Dong-Wha; 이동화; et al, 한국과학기술원, 1993 |
73 | Determination of an Optimal configuration of Operating Policies for Direct-input-output Manufacturing Systems Using the Taguchi Method Lim, JM; Kim, KS; Yum, Bong-Jin; Hwang, Hark, Proceedings of 18th International Conference on Computers, pp.72 - 77, 1995 |
74 | Determination of an optimal configuration of operating policies for Direct-Input-Output manufacturing systems using the Taguchi method Lim, JM; Kim, KS; Yum, Bong-Jin; Hwang, H, COMPUTERS INDUSTRIAL ENGINEERING, v.31, no.3-4, pp.555 - 560, 1996-12 |
75 | DETERMINATION OF EFFECTIVE BURN-IN TIME FOR PRINTED BOARD ASSEMBLY KOH, JS; KIM, CH; PARK, JI; Yum, Bong-Jin, MICROELECTRONICS RELIABILITY, v.35, no.6, pp.893 - 902, 1995-06 |
76 | DETERMINATION OF MINIMAL UPPER PATHS FOR RELIABILITY-ANALYSIS OF PLANAR FLOW NETWORKS LEE, DW; Yum, Bong-Jin, RELIABILITY ENGINEERING SYSTEM SAFETY, v.39, no.1, pp.1 - 10, 1993 |
77 | Determination of minimal upper vectors for calculating flow network reliability = Flow 네트워크의 신뢰도 계산을 위한 minimal upper vector의 결정link Lee, Dong-Wha; 이동화; et al, 한국과학기술원, 1989 |
78 | DETERMINATION OF THE MOST RELIABLE PATH OF A PLANAR FLOW NETWORK LEE, DW; Yum, Bong-Jin, RELIABILITY ENGINEERING SYSTEM SAFETY, v.46, no.3, pp.231 - 236, 1994 |
79 | Development and comparisons of reliability acceptance sampling plans for exponential and gamma lifetime distributions = 지수 및 감마 수명분포에 대한 신뢰도 합격 판정 샘플링계획의 개발 및 비교연구link Jeong, Hyun-Seok; 정현석; et al, 한국과학기술원, 1994 |
80 | Development and comparisons of reliability acceptance sampling plans for the weibull distribution under accelerated type-i censoring = 가속 정시중단 하에서 와이블 분포에 대한 신뢰도 합격 판정 샘플링 검사계획의 개발 및 비교연구link Kim, Min; 김민; et al, 한국과학기술원, 2008 |
81 | Development and Estimation of Performance Measures for Dynamic Parameter Design Problems Jung, JR; Yum, Bong-Jin, The 10th Annual International Conference on Industrial Engineering, Serial. 10, 2005-12-01 |
82 | Development and evaluation of an uncertainty importance measure in fault tree analysis Cho, JG; Yum, Bong-Jin, RELIABILITY ENGINEERING & SYSTEM SAFETY, v.57, pp.143 - 157, 1997 |
83 | Development and improvement of parameter design methodologies for dynamic characteristics = 동적 성능특성치에 대한 파라미터 설계 방법의 개발 및 개선에 관한 연구link Park, Yang-Gil; 박양길; et al, 한국과학기술원, 2002 |
84 | Development multiple criteria decision support system for resolving conflicts among group members = 그룹구성원간의 상충된 목표를 절충하기 위한 다기준의사결정지원시스템의 개발에 관한 연구link Chung, Tae-Young; 정태영; Yum, Bong-Jin; Kim, Soung-Hie; et al, 한국과학기술원, 1995 |
85 | Development of (r,T) hybrid sampling plans for exponential lifetime distributions Jeong, HS; Park, JI; Yum, Bong-Jin, JOURNAL OF APPLIED STATISTICS, v.23, no.6, pp.601 - 607, 1996-12 |
86 | Development of a dual burn-in policy for semiconductor products based on the number of defective neighborhood chips Tong S.H.; Yum, Bong-Jin, INTERNATIONAL JOURNAL OF RELIABILITY, QUALITY AND SAFETY ENGINEERING, v.13, no.6, pp.501 - 525, 2006-12 |
87 | Development of a Framework for Analyzing Process Monitoring Data with Applications to Semiconductor Manufacturing process Yoon, YH; Kim, YS; Kim, SJ; Yum, Bong-Jin, COMPSTAT2002, pp.297 - 302, 2002-08 |
88 | Development of a Recommender System Based on Navigational and Behavioral paterns of Customers in E-Commerce Sites Kim, YS; Yum, Bong-Jin; Song, JH, Annual Conference of Gesellschaft fur Klassifikation, pp.115 - 115, 2002-07-01 |
89 | Development of a recommender system based on navigational and behavioral patterns of customers in e-commerce sites Kim, YS; Yum, Bong-Jin; Song, J; Kim, SM, EXPERT SYSTEMS WITH APPLICATIONS, v.28, pp.381 - 393, 2005-02 |
90 | Development of dimension reduction algorithms for collaborative filtering = 협업적 필터링을 위한 차원감소 알고리즘의 개발link Kim, Do-Hyun; 김도현; et al, 한국과학기술원, 2007 |
91 | Development of hypothesis test procedures and sampling plans for the exponential parameter based on accelerated life testing = 가속수명시험에 의한 지수 모수의 가설검정 절차 및 샘플링검사계획의 개발link Kim, Sun-Ho; 김선호; et al, 한국과학기술원, 1998 |
92 | DEVELOPMENT OF LIFE-TEST SAMPLING PLANS FOR EXPONENTIAL-DISTRIBUTIONS BASED ON ACCELERATED LIFE TESTING Yum, Bong-Jin; KIM, SH, COMMUNICATIONS IN STATISTICS-THEORY AND METHODS, v.19, no.7, pp.2735 - 2743, 1990 |
93 | Development of parameter design methodologies for dynamic characteristics = 동적 성능특성치에 대한 파라미터설계 방법의 개발에 관한 연구link Jung, Jae-Ryung; 정제령; et al, 한국과학기술원, 2009 |
94 | Development of Performance Measures for Dynamic Parameter Design Problems Park, YG; Yum, Bong-Jin, Proceedings of the 2nd Asia-Pacific Conference on Industrial Engineering and Management, pp.377 - 380, 1999-10 |
95 | Development of performance Measures for Dynamic parameter Design Problems Yang Gil Park; Yum, Bong-Jin, INTERNATIONAL JOURNAL OF MANUFACTURING TECHNOLOGY AND MANAGEMENT, v.5, no.1, pp.91 - 104, 2003-01 |
96 | Development of Reliability Acceptance Sampling Plans under Accelerated Life Testing and Type II Censoring Kim, SH; Kim, M; Yum, Bong-Jin, International Conference on Computers and Industrial Engineering, pp.1 - 3, 2004-03 |
97 | Development of robust analysis methods for experimental and observational data with emphasis on functional response analysis and kriging = 실험 및 관측 데이터에 대한 강건 분석 방법의 개발: 함수형 반응치 분석 및 크리깅을 중심으로link Park, Tae-Jin; 박태진; et al, 한국과학기술원, 2013 |
98 | Development of robust kernel-based learning algorithms for regression and classification problems = 회귀분석과 분류 문제를 위한 강건한 커널 학습방법의 개발link Hwang, Sang-Heum; 황상흠; et al, 한국과학기술원, 2012 |
99 | Development of SN ratio and interaction graphs for dynamic parameter design problem = 동적 피라미터 설계의 SN비와 교호작용 그래프의 개발에 관한 연구link Ko, Sung-Ho; 고성호; et al, 한국과학기술원, 1994 |
100 | Development of tabu search-based heuristics for solving exact optimal design and clustering problems = 최적실험계획문제와 집락문제의 해결을 위한 타부탐색에 근거한 발견적 해법의 개발link Jung, Joo-Sung; 정주성; et al, 한국과학기술원, 1996 |
101 | Development of UMP unbiased test procedures for the exponential mean lifetime under accelerated life testing = 가속수명 검사하에서 지수분포의 평균에 대한 UMP 불편 검정절차의 개발link Ko, Yeong-Jun; 고영준; et al, 한국과학기술원, 1989 |