553 | 작은 원봉에 의한 원주와유동의 변형에 관한 연구 = A numerical study on alteration of the vortical flow behind a circular cylinder by a small control wirelink 김학봉; Kim, Hark-Bong; et al, 한국과학기술원, 1995 |
554 | 저속충격을 받는 복합적층판의 거동과 손상에 대한 연구 = Response and damage of composite laminates subjected to low-velocity impactlink 최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1994 |
555 | 저해상도 지도를 참조하는 다중정합 기반 영상항법 알고리즘 연구 = Multi-matching based vision navigation algorithm referencing a low-resolution maplink 신석현; 이지윤; et al, 한국과학기술원, 2022 |
556 | 적층 복합재 구조물에 대한 확률유한요소법과 시스템 신뢰도 해석 = Stochastic finite element method and system reliability analysis for laminated composite structureslink 박지상; Park, Ji-Sang; et al, 한국과학기술원, 1995 |
557 | 전기장 제어 확산 화염의 연소 특성 연구 = Investigation on the combustion characteristics of the electric field controlled diffusion flamelink 김상민; 백승욱; et al, 한국과학기술원, 2019 |
558 | 전도성 혼합 섬유를 이용한 직물형 밀리미터파 흡수체 설계 = Design of fabric millimeter wave absorber using mixed conductive yarnlink 신상훈; Shin, Sang-Hun; et al, 한국과학기술원, 2010 |
559 | 전문가 시스템을 이용한 복합재 구조물의 설계 = Design of composite structures using expert systemlink 김정석; Kim, Jung-Seok; et al, 한국과학기술원, 1999 |
560 | 전산유체역학을 이용한 예인되는 부유체의 침로 안정성에 대한 연구 = A study on directional stability of towed floating bodies by computational fluid dynamicslink 권창섭; Kwon, Chang Seop; et al, 한국과학기술원, 2015 |
561 | 전자파흡수 복합재구조의 흡수 성능 향상을 위한 제작 공정 연구 = Fabrication methods for the improved absorption performance in microwave-absorbing compositeslink 송태훈; 김천곤; et al, 한국과학기술원, 2015 |
562 | 전진 비행하는 로터의 자동회전 범위와 특성에 관한 수치적 연구 = A numerical study on the autorotation range and characteristics of a rotor in forward flightlink 김학윤; Kim, Hak-Yoon; et al, 한국과학기술원, 2009 |
563 | 전파 흡수 구조를 위한 전도성 미세 패턴 직물의 유전율 제어 연구 = Control of dielectric properties of micropattern printed fabric for radar absorbing structureslink 김상용, 한국과학기술원, 2022 |
564 | 전파흡수구조의 전자기적 특성 분포의 불연속성에 관한 연구 = (A) study on discontinuity of electromagnetic characteristics distribution of radar absorbing structureslink 현종민; 이정률; et al, 한국과학기술원, 2022 |
565 | 점탄성 재료 및 ER 유체를 이용한 복합재 구조물의 진동 저감 : Vibration reduction of composite structures using viscoelastic material and Electro-Rheological fluid = Vibration reduction of composite structures using viscoelastic material and Electro-Rheological fluidlink , 한국과학기술원, 2000 |
566 | 접착요소와 마이크로 유전자 알고리즘을 이용한 복합재 보강 패널의 최적설계 = Optimal design of composite stiffened panel with cohesive elements using micro-GAlink 김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 2008 |
567 | 접촉을 고려한 원호계면균열의 해석 및 응력강도계수 계산 = Analysis of circular arc-shaped interfacial crack with contact, and evaluation of stress intensity factorlink 최낙윤; Choi, Nack-Yoon; et al, 한국과학기술원, 1992 |
568 | 접합된 복합재료 적층 구조물의 분리 파손 특성 연구 = Debonding failure characteristics of composite bonded structureslink 김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 2005 |
569 | 정교한 구조 및 공기력 모델을 사용한 무힌지 로우터 블레이드에 대한 공탄성 해석 = Aeroelastic analysis of hingeless rotor blades using refined structural and aerodynamic modelslink 조맹효; Cho, Maeng-Hyo; et al, 한국과학기술원, 1994 |
570 | 정지 및 전진 비행시 복합재료 무힌지 로우터 블레이드의 공탄성 해석 = Aeroelastic analysis of composite hingeless rotor blades in hovering and forward flightslink 전성민; Seong, Min-Jeon; et al, 한국과학기술원, 1999 |
571 | 정확하고 강건한 고해상도 집적 단조성-보존 기법 개발 및 초음속 제트 소음 예측에의 응용 = Development of accurate and robust high-resolution compact monotonicity-preserving scheme and its application to supersonic jet noise predictionlink 안명환; 이덕주; et al, 한국과학기술원, 2019 |
572 | 조종면 및 외부 장착물이 있는 날개의 천음속/초음속 플러터 해석 = Transonic/supersonic flutter analysis of wings with control surface and external storelink 김동현; Kim, Dong-Hyun; et al, 한국과학기술원, 2000 |
573 | 주위류를 갖는 난류확산 부상화염의 구조에 관한 실험적 연구 = Structural characteristics of lifted turbulent jet flames-coflowing airlink 박종원; Park, Jong-Won; et al, 한국과학기술원, 1994 |
574 | 증가계수의 직접 계산법을 이용한 항공기 유동장내의 분리효과 예측 = Prediction of ballistic separation effect in aircraft flow field by direct calculation of incremental coefficientslink 김유진; Kim, Eu-Gene; et al, 한국과학기술원, 2010 |
575 | 지능 복합재 구조의 진동 제어에 관한 해석 및 실험적 연구 = Analytical and experimental study for vibration control of smart composite structureslink 한재흥; Han, Jae-Hung; et al, 한국과학기술원, 1998 |
576 | 지상환경과 우주환경하의 복합재료의 특성 및 수명예측 연구 = Characterization and lifetime prediction of composite materials under ground and space environmentslink 신광복; Shin, Kwang-Bok; et al, 한국과학기술원, 2000 |
577 | 직접NaBH4/H2O2 연료전지용 금도금 마그네슘 분리판의 제작 및 성능평가 = Fabrication and performance evaluation of au coated magnesium bipolar plates for direct NaBH4/H2O2 fuel celllink 김지현; Kim, Jihyun; et al, 한국과학기술원, 2015 |
578 | 진동하는 3차원 날개의 tip vortex roll-up에 관한 실험적 연구 = An experimental study of tip vortex roll-up of an oscillating winglink 장조원; Chang, Jo-Won; et al, 한국과학기술원, 1999 |
579 | 진동하는 날개의 후류에 관한 실험 연구 = An experimental study of near wakes behind an oscillating airfoillink 김종성; Kim, Jong-Seung; et al, 한국과학기술원, 1989 |
580 | 진동하는 에어포일의 근접후류 측정 연구 = Vortex shedding in the near wake of an oscillating airfoillink 정용운; Jung, Yong-Wun; et al, 한국과학기술원, 2003 |
581 | 진동하는 익형 후류의 레이놀즈 응력 측정 = Reynolds stress measurements in the near wake of an oscillating airfoillink 이부일; Lee, Boo-Il; et al, 한국과학기술원, 1993 |
582 | 천음속 영역에서 유격을 고려한 날개의 공탄성 특성 = Aeroelastic characteristics of a wing with freeplay in transonic regionlink 박영근; Park, Young-Keun; et al, 한국과학기술원, 2005 |
583 | 천음속 유동장을 고려한 굴곡형 흡입관에서의 소음 방사 해석 = An analysis of sound radiation from curved intake in transonic flow fieldlink 심인보; Shim, In-Bo; et al, 한국과학기술원, 2003 |
584 | 천이영역 유동 해석을 위한 CFD-DSMC 혼합해석기법에 관한 연구 = (A) study on a hybrid CFD-DSMC method for simulations of transition regime flowslink 최영재; 권오준; et al, 한국과학기술원, 2019 |
585 | 초기 응력이 가해진 기저 구조물을 이용한 압전 유니모프의 개발 = Development of a piezoelectric unimorph with mechanically pre-stressed substratelink 강래형; Kang, Lae-Hyong; et al, 한국과학기술원, 2010 |
586 | 초소형 MHD 펌프 성능에 관한 해석 및 실험적 연구 = Analytical and experimental investigations on the performance of MHD micropumplink 김춘택; Kim, Chun-Taek; et al, 한국과학기술원, 2007 |
587 | 초소형 고체추진제 추력기의 내탄도 모델링 및 성능평가 = Internal ballistic modeling of a solid propellant micro thruster and evaluationlink 양준서; Yang, June-Seo; et al, 한국과학기술원, 2009 |
588 | 초음속 공기유동으로의 연료 분사에 관한 수치적 연구 = Numerical study on the fuel injection into a supersonic air streamlink 김경무; Kim, Kyung-Moo; et al, 한국과학기술원, 2002 |
589 | 초음속 난류 전단유동의 수치적 모사 = Numerical simulation of supersonic turbulent shear flowslink 김민환; Kim, Min-Hwan; et al, 한국과학기술원, 1998 |
590 | 초음속 충돌 제트 유동의 진동 특성에 관한 수치적 연구 = Numerical investigation of the oscillatory behavior of supersonic impinging jet flowslink 김성인; Kim, Sung-In; et al, 한국과학기술원, 2005 |
591 | 초음속 충동형 터빈의 부분 분사가 터빈 성능과 진동에 미치는 영향 = Partial admission effect on the performance and vibration of a supersonic impulse turbinelink 이항기; 권세진; et al, 한국과학기술원, 2018 |
592 | 초음속 화학반응유동의 수치적 연구 = Numerical study of supersonic chemically reacting flowslink 정동규; Chung, Dong-Kyu; et al, 한국과학기술원, 1994 |
593 | 추력 노즐 변화에 따른 수소 스크램제트 엔진 특성 = Investigation on the performance of hydrogen fuel scramjet engine with thrust nozzle variationlink 이양지; Lee, Yang-Ji; et al, 한국과학기술원, 2014 |
594 | 추력벡터제어를 위한 이차 분사유동이 있는 2DCD 노즐 내부의 입자-기체유동 상호작용의 수치적 연구 = Numerical investigation of gas-particle interaction in 2DCD nozzle having a secondary jet injection for thrust vector controllink 이진규; Lee, Jin-Gyu; et al, 한국과학기술원, 2003 |
595 | 축류압축기의 설계 최적화 = Design optimization of an axial-flow compressor stagelink 임진식; Lim, Jin-Shik; et al, 한국과학기술원, 1988 |
596 | 축약모델을 이용한 등가시스템 구성 및 동특성에 관한 연구 = Investigation on equivalent system modeling and dynamic characteristics using reduced modelslink 신영석; Shin, Young-Sug; et al, 한국과학기술원, 1999 |
597 | 충돌하는 제트로 인한 합성제트 유동장에 수치연구 = Numerical study on the outwash jet arising from two opposing jetslink 조성호; Cho, Seong-Ho; et al, 한국과학기술원, 1997 |
598 | 층간분리가 존재하는 복합재 적층판의 좌굴 및 좌굴후거동 해석 = Bucking and postbuckling behavior of composite laminates with a delaminationlink 김효진; Kim, Hyo-Jin; et al, 한국과학기술원, 1994 |
599 | 케이싱 트리트먼트를 이용한 천음속 축류 압축기 안정성 향상 = Transonic axial compressor stability enhancement with casing treatmentlink 임병준; Lim, Byeung Jun; et al, 한국과학기술원, 2014 |
600 | 큰 가로세로비 날개의 공력탄성학적 특성에 관한 연구 = A Study on aeroelastic characteristics of high-aspect-ratio wingslink 김경석; Kim, Kyung Seok; et al, 한국과학기술원, 2010 |
601 | 타원 익형 공력 및 유동장 특성에 대한 실험적 연구 = Experimental study on aerodynamic and flow field characteristics of elliptic airfoilslink 권기정; Kwon, Ki-Jung; et al, 한국과학기술원, 2006 |
602 | 탄성 변형 효과를 고려한 전진 비행하는 헬리콥터 로터 블레이드 공기역학 해석 = Aerodynamic analysis of helicopter rotor blades in forward flight considering elastic deflection effectslink 남화진; Nam, Hwa-Jin; et al, 한국과학기술원, 2008 |
603 | 탄소 열 방어 시스템의 삭마에 대한 실험 및 수치적 연구 = Experimental and numerical study on ablation of carbon-based thermal protection systemlink 이상훈; Lee, Sanghoon; et al, 한국과학기술원, 2021 |
604 | 탄소섬유강화 복합재료의 혼합모우드 층간파괴특성에 관한 연구 = Characterization of interlaminar fracture in graphite/epoxy composite under mixed-mode deformationslink 윤성호; Yoon, Sung-Ho; et al, 한국과학기술원, 1990 |
605 | 터보 냉각 사이클의 고도 모사를 위한 지상 시험 = Ground simulation of altitude test of turbo-refrigeration cyclelink 백승윤; Paek, Seung-Yun; et al, 한국과학기술원, 2017 |
606 | 파형벽면에 관한 압축성 난류 Navier-stokes 유동의 해석 = Numerical analysis of compressible turbulent navier-stokes flow over a wavy walllink 박정주; Park, Jeong-Joo; et al, 한국과학기술원, 1989 |
607 | 판파(판파)와 압전센서를 이용한 복합재 구조물의 손상평가 = Damage assessment for composite structures using plate wave and piezoelectric sensorslink 김영한; Kim, Young-Han; et al, 한국과학기술원, 2004 |
608 | 폐쇄형 풍동 시험부내의 정상 및 비정상 박리 흐름에 대한 Blockage 보정 기법 연구 = A study on the blockage correction method for steady and unsteady separated flows in a closed test section wind tunnellink 강승희; Kang, Seung-Hee; et al, 한국과학기술원, 2005 |
609 | 폴리프로필렌이 함침된 유리섬유 강화 복합재를 적용한 부품 성형 조건에 따른 물성 영향 = Effect of molding conditions on mechanical properties for parts using glass fiber reinforced composites impregnated with polypropylenelink 이종욱; 김천곤; et al, 한국과학기술원, 2022 |
610 | 풍동시험부의 벽면간섭 및 적응벽면 모형에 관한 수치적 연구 = Numerical study on wall interference and adaptive wall models for wind tunnel test sectionlink 장병희; Chang, Byeong-Hee; et al, 한국과학기술원, 1996 |
611 | 풍동시험에서 풍력터빈 블레이드의 실속 전 공력성능 보정기법 및 공력소음원 측정기법 연구 = On the correction method for the pre-stall aerodynamic performance of the scaled wind turbine model blade and the measurement method for the aero-acoustic noise source in the wind tunnellink 조태환; Cho, Tae-Hwan; et al, 한국과학기술원, 2010 |
612 | 플레어가 부착된 발사체의 저면 항력에 관한 연구 = Study of Base Drag Prediction for Flared Projectileslink 선철; Sun, Chul; et al, 한국과학기술원, 2011 |