541 | 전파흡수구조의 전자기적 특성 분포의 불연속성에 관한 연구 = (A) study on discontinuity of electromagnetic characteristics distribution of radar absorbing structureslink 현종민; 이정률; et al, 한국과학기술원, 2022 |
542 | 점탄성 재료 및 ER 유체를 이용한 복합재 구조물의 진동 저감 : Vibration reduction of composite structures using viscoelastic material and Electro-Rheological fluid = Vibration reduction of composite structures using viscoelastic material and Electro-Rheological fluidlink , 한국과학기술원, 2000 |
543 | 접착요소와 마이크로 유전자 알고리즘을 이용한 복합재 보강 패널의 최적설계 = Optimal design of composite stiffened panel with cohesive elements using micro-GAlink 김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 2008 |
544 | 접촉을 고려한 원호계면균열의 해석 및 응력강도계수 계산 = Analysis of circular arc-shaped interfacial crack with contact, and evaluation of stress intensity factorlink 최낙윤; Choi, Nack-Yoon; et al, 한국과학기술원, 1992 |
545 | 접합된 복합재료 적층 구조물의 분리 파손 특성 연구 = Debonding failure characteristics of composite bonded structureslink 김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 2005 |
546 | 정교한 구조 및 공기력 모델을 사용한 무힌지 로우터 블레이드에 대한 공탄성 해석 = Aeroelastic analysis of hingeless rotor blades using refined structural and aerodynamic modelslink 조맹효; Cho, Maeng-Hyo; et al, 한국과학기술원, 1994 |
547 | 정지 및 전진 비행시 복합재료 무힌지 로우터 블레이드의 공탄성 해석 = Aeroelastic analysis of composite hingeless rotor blades in hovering and forward flightslink 전성민; Seong, Min-Jeon; et al, 한국과학기술원, 1999 |
548 | 정확하고 강건한 고해상도 집적 단조성-보존 기법 개발 및 초음속 제트 소음 예측에의 응용 = Development of accurate and robust high-resolution compact monotonicity-preserving scheme and its application to supersonic jet noise predictionlink 안명환; 이덕주; et al, 한국과학기술원, 2019 |
549 | 조종면 및 외부 장착물이 있는 날개의 천음속/초음속 플러터 해석 = Transonic/supersonic flutter analysis of wings with control surface and external storelink 김동현; Kim, Dong-Hyun; et al, 한국과학기술원, 2000 |
550 | 주위류를 갖는 난류확산 부상화염의 구조에 관한 실험적 연구 = Structural characteristics of lifted turbulent jet flames-coflowing airlink 박종원; Park, Jong-Won; et al, 한국과학기술원, 1994 |
551 | 증가계수의 직접 계산법을 이용한 항공기 유동장내의 분리효과 예측 = Prediction of ballistic separation effect in aircraft flow field by direct calculation of incremental coefficientslink 김유진; Kim, Eu-Gene; et al, 한국과학기술원, 2010 |
552 | 지능 복합재 구조의 진동 제어에 관한 해석 및 실험적 연구 = Analytical and experimental study for vibration control of smart composite structureslink 한재흥; Han, Jae-Hung; et al, 한국과학기술원, 1998 |
553 | 지상환경과 우주환경하의 복합재료의 특성 및 수명예측 연구 = Characterization and lifetime prediction of composite materials under ground and space environmentslink 신광복; Shin, Kwang-Bok; et al, 한국과학기술원, 2000 |
554 | 직접NaBH4/H2O2 연료전지용 금도금 마그네슘 분리판의 제작 및 성능평가 = Fabrication and performance evaluation of au coated magnesium bipolar plates for direct NaBH4/H2O2 fuel celllink 김지현; Kim, Jihyun; et al, 한국과학기술원, 2015 |
555 | 진동하는 3차원 날개의 tip vortex roll-up에 관한 실험적 연구 = An experimental study of tip vortex roll-up of an oscillating winglink 장조원; Chang, Jo-Won; et al, 한국과학기술원, 1999 |
556 | 진동하는 날개의 후류에 관한 실험 연구 = An experimental study of near wakes behind an oscillating airfoillink 김종성; Kim, Jong-Seung; et al, 한국과학기술원, 1989 |
557 | 진동하는 에어포일의 근접후류 측정 연구 = Vortex shedding in the near wake of an oscillating airfoillink 정용운; Jung, Yong-Wun; et al, 한국과학기술원, 2003 |
558 | 진동하는 익형 후류의 레이놀즈 응력 측정 = Reynolds stress measurements in the near wake of an oscillating airfoillink 이부일; Lee, Boo-Il; et al, 한국과학기술원, 1993 |
559 | 천음속 영역에서 유격을 고려한 날개의 공탄성 특성 = Aeroelastic characteristics of a wing with freeplay in transonic regionlink 박영근; Park, Young-Keun; et al, 한국과학기술원, 2005 |
560 | 천음속 유동장을 고려한 굴곡형 흡입관에서의 소음 방사 해석 = An analysis of sound radiation from curved intake in transonic flow fieldlink 심인보; Shim, In-Bo; et al, 한국과학기술원, 2003 |
561 | 천이영역 유동 해석을 위한 CFD-DSMC 혼합해석기법에 관한 연구 = (A) study on a hybrid CFD-DSMC method for simulations of transition regime flowslink 최영재; 권오준; et al, 한국과학기술원, 2019 |
562 | 초기 응력이 가해진 기저 구조물을 이용한 압전 유니모프의 개발 = Development of a piezoelectric unimorph with mechanically pre-stressed substratelink 강래형; Kang, Lae-Hyong; et al, 한국과학기술원, 2010 |
563 | 초소형 MHD 펌프 성능에 관한 해석 및 실험적 연구 = Analytical and experimental investigations on the performance of MHD micropumplink 김춘택; Kim, Chun-Taek; et al, 한국과학기술원, 2007 |
564 | 초소형 고체추진제 추력기의 내탄도 모델링 및 성능평가 = Internal ballistic modeling of a solid propellant micro thruster and evaluationlink 양준서; Yang, June-Seo; et al, 한국과학기술원, 2009 |
565 | 초음속 공기유동으로의 연료 분사에 관한 수치적 연구 = Numerical study on the fuel injection into a supersonic air streamlink 김경무; Kim, Kyung-Moo; et al, 한국과학기술원, 2002 |
566 | 초음속 난류 전단유동의 수치적 모사 = Numerical simulation of supersonic turbulent shear flowslink 김민환; Kim, Min-Hwan; et al, 한국과학기술원, 1998 |
567 | 초음속 충돌 제트 유동의 진동 특성에 관한 수치적 연구 = Numerical investigation of the oscillatory behavior of supersonic impinging jet flowslink 김성인; Kim, Sung-In; et al, 한국과학기술원, 2005 |
568 | 초음속 충동형 터빈의 부분 분사가 터빈 성능과 진동에 미치는 영향 = Partial admission effect on the performance and vibration of a supersonic impulse turbinelink 이항기; 권세진; et al, 한국과학기술원, 2018 |
569 | 초음속 화학반응유동의 수치적 연구 = Numerical study of supersonic chemically reacting flowslink 정동규; Chung, Dong-Kyu; et al, 한국과학기술원, 1994 |
570 | 추력 노즐 변화에 따른 수소 스크램제트 엔진 특성 = Investigation on the performance of hydrogen fuel scramjet engine with thrust nozzle variationlink 이양지; Lee, Yang-Ji; et al, 한국과학기술원, 2014 |
571 | 추력벡터제어를 위한 이차 분사유동이 있는 2DCD 노즐 내부의 입자-기체유동 상호작용의 수치적 연구 = Numerical investigation of gas-particle interaction in 2DCD nozzle having a secondary jet injection for thrust vector controllink 이진규; Lee, Jin-Gyu; et al, 한국과학기술원, 2003 |
572 | 축류압축기의 설계 최적화 = Design optimization of an axial-flow compressor stagelink 임진식; Lim, Jin-Shik; et al, 한국과학기술원, 1988 |
573 | 축약모델을 이용한 등가시스템 구성 및 동특성에 관한 연구 = Investigation on equivalent system modeling and dynamic characteristics using reduced modelslink 신영석; Shin, Young-Sug; et al, 한국과학기술원, 1999 |
574 | 충돌하는 제트로 인한 합성제트 유동장에 수치연구 = Numerical study on the outwash jet arising from two opposing jetslink 조성호; Cho, Seong-Ho; et al, 한국과학기술원, 1997 |
575 | 층간분리가 존재하는 복합재 적층판의 좌굴 및 좌굴후거동 해석 = Bucking and postbuckling behavior of composite laminates with a delaminationlink 김효진; Kim, Hyo-Jin; et al, 한국과학기술원, 1994 |
576 | 케이싱 트리트먼트를 이용한 천음속 축류 압축기 안정성 향상 = Transonic axial compressor stability enhancement with casing treatmentlink 임병준; Lim, Byeung Jun; et al, 한국과학기술원, 2014 |
577 | 큰 가로세로비 날개의 공력탄성학적 특성에 관한 연구 = A Study on aeroelastic characteristics of high-aspect-ratio wingslink 김경석; Kim, Kyung Seok; et al, 한국과학기술원, 2010 |
578 | 타원 익형 공력 및 유동장 특성에 대한 실험적 연구 = Experimental study on aerodynamic and flow field characteristics of elliptic airfoilslink 권기정; Kwon, Ki-Jung; et al, 한국과학기술원, 2006 |
579 | 탄성 변형 효과를 고려한 전진 비행하는 헬리콥터 로터 블레이드 공기역학 해석 = Aerodynamic analysis of helicopter rotor blades in forward flight considering elastic deflection effectslink 남화진; Nam, Hwa-Jin; et al, 한국과학기술원, 2008 |
580 | 탄소섬유강화 복합재료의 혼합모우드 층간파괴특성에 관한 연구 = Characterization of interlaminar fracture in graphite/epoxy composite under mixed-mode deformationslink 윤성호; Yoon, Sung-Ho; et al, 한국과학기술원, 1990 |
581 | 터보 냉각 사이클의 고도 모사를 위한 지상 시험 = Ground simulation of altitude test of turbo-refrigeration cyclelink 백승윤; Paek, Seung-Yun; et al, 한국과학기술원, 2017 |
582 | 파형벽면에 관한 압축성 난류 Navier-stokes 유동의 해석 = Numerical analysis of compressible turbulent navier-stokes flow over a wavy walllink 박정주; Park, Jeong-Joo; et al, 한국과학기술원, 1989 |
583 | 판파(판파)와 압전센서를 이용한 복합재 구조물의 손상평가 = Damage assessment for composite structures using plate wave and piezoelectric sensorslink 김영한; Kim, Young-Han; et al, 한국과학기술원, 2004 |
584 | 폐쇄형 풍동 시험부내의 정상 및 비정상 박리 흐름에 대한 Blockage 보정 기법 연구 = A study on the blockage correction method for steady and unsteady separated flows in a closed test section wind tunnellink 강승희; Kang, Seung-Hee; et al, 한국과학기술원, 2005 |
585 | 폴리프로필렌이 함침된 유리섬유 강화 복합재를 적용한 부품 성형 조건에 따른 물성 영향 = Effect of molding conditions on mechanical properties for parts using glass fiber reinforced composites impregnated with polypropylenelink 이종욱; 김천곤; et al, 한국과학기술원, 2022 |
586 | 풍동시험부의 벽면간섭 및 적응벽면 모형에 관한 수치적 연구 = Numerical study on wall interference and adaptive wall models for wind tunnel test sectionlink 장병희; Chang, Byeong-Hee; et al, 한국과학기술원, 1996 |
587 | 풍동시험에서 풍력터빈 블레이드의 실속 전 공력성능 보정기법 및 공력소음원 측정기법 연구 = On the correction method for the pre-stall aerodynamic performance of the scaled wind turbine model blade and the measurement method for the aero-acoustic noise source in the wind tunnellink 조태환; Cho, Tae-Hwan; et al, 한국과학기술원, 2010 |
588 | 플레어가 부착된 발사체의 저면 항력에 관한 연구 = Study of Base Drag Prediction for Flared Projectileslink 선철; Sun, Chul; et al, 한국과학기술원, 2011 |
589 | 필라멘트 와인딩된 압력 탱크의 점진적 파손 해석 및 설계 = Progressive failure analysis and design of filament wound pressure vesselslink 박재성; Park, Jae-Sung; et al, 한국과학기술원, 2002 |
590 | 항공기 생존성 향상을 위한 후방동체 온도 저감 및 IR 신호 연구 = Investigation of ir signature and temperature reduction of the rear fuselage for an aircraft survivabilitylink 이경주; Yi, Kyung-joo; et al, 한국과학기술원, 2014 |
591 | 항공기 익형 공력특성 향상을 위한 유동제어 기법에 관한 수치적 연구 = Numerical study about a flow control mechanism for the enhancement of aerodynamic characteristics of 2-D airfoilslink 최성윤; Choi, Sung-Yoon; et al, 한국과학기술원, 2008 |
592 | 항공우주시스템용 직접 NaBH4/H2O2 연료전지의 개발 및 검증 = Development and validation of direct NaBH4/H2O2 fuel cell for aerospace systemlink 오택현; Oh, Taek-Hyun; et al, 한국과학기술원, 2013 |
593 | 헬리콥터 로터의 후류 형상 및 성능 예측을 위한 순차적 시간 적분 자유 후류법 개발 = Development of a time-marching free-wake method for the prediction of helicopter rotor wake geometry and performancelink 라선욱; Na, Seon-Uk; et al, 한국과학기술원, 1998 |
594 | 헬리콥터 무힌지 로터시스템의 복합재료 적용을 통한 구조동역학 특성 향상에 대한 실험적 연구 = An experimental study on structural dynamic characteristics improvement by applying composite materials to the helicopter hingeless rotor systemlink 김덕관; Kim, Deog-Kwan; et al, 한국과학기술원, 2011 |
595 | 형상 기억 합금 작동기를 이용한 가변 형상 날개 개발 및 형상 제어 = Development of morphing wing and shape control using shape memory alloy actuatorlink 임미선; Rim, Mi-Sun; et al, 한국과학기술원, 2014 |
596 | 형상기억합금 기반 가변 강성 메쉬 절연계 개발 = Development of stiffness tunable mesh isolator based on shape memory alloylink 정호경; Jeong, Ho-Kyeong; et al, 한국과학기술원, 2014 |
597 | 형상기억합금 의탄성 효과 기반 파이로 충격 저감용 메쉬 절연계 개발 = development of pyroshock mesh isolator based on SMA pseudoelasticitylink 윤세현; Youn, Se-Hyun; et al, 한국과학기술원, 2010 |
598 | 형상기억합금 작동기를 이용한 스마트 구조의 형상 제어에 관한 연구 = A study on shape control of smart structures using shape memory alloy actuatorslink 양승만; Yang, Seung-Man; et al, 한국과학기술원, 2005 |
599 | 회전익-고정익 상호간섭 및 블레이드 진동의 영향이 있는 축류 압축기내에서의 비정상 천음속 유동 = Unsteady transonic axial-compressor flow under the effect of rotor-stator interaction or blade vibrationlink 강인모; Kang, In-Mo; et al, 한국과학기술원, 1991 |
600 | 효율적인 SMA 모델링 및 SMAHC의 동적/음향 특성 = Effective SMA Modeling and Dynamic/Acoustic Characteristics of SMAHClink 강명구; Kang, Myung-Koo; et al, 한국과학기술원, 2011 |