Browse "Dept. of Aerospace Engineering(항공우주공학과)" by Type Thesis(Master)

Showing results 601 to 660 of 958

601
복합재료 평판의 초음속 플러터 해석 = Flutter analysis of composite panels in supersonic flowlink

조맹효; Cho, Maeng-Hyo; et al, 한국과학기술원, 1990

602
복합재료 헬리콥터 블레이드의 동적 특성 = Dynamic characteristics of a composite helicopter rotor bladelink

차호철; Cha, Ho-Chul; et al, 한국과학기술원, 1989

603
복합재료의 전자기파 반사특성을 고려한 구조물 설계 및 해석 = Design and analysis of radar absorbing structure considering electromagnetic wave reflection properties of composite platelink

송운형; Song, Woon-Hyoung; et al, 한국과학기술원, 2000

604
복합재료의 혼합모우드 층간파괴인성치의 실험적 평가 = Evaluation of mixed mode interlaminar fracture toughness of graphite/epoxy composite materialslink

김형준; Kim, Hyong-Jun; et al, 한국과학기술원, 1989

605
복합적층판의 저속 충격거동에 대한 비선형 해석 = Nonlinear analysis of composite laminates subjected to low-velocity impactlink

최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1989

606
부분 선형 근사 기법을 이용한 정적 무장 할당 연구 = Piecewise-linear approximation method for static weapon-target assignmentlink

신인선; Shin, In Seon; et al, 한국과학기술원, 2016

607
부스팅 노즐에 의한 초음속 캐비티 압력 변화에 관한 연구 = Effect of boosting nozzle on the pressure of supersonic cavitylink

김형준; Kim, Hyung-Jun; et al, 한국과학기술원, 2003

608
분산형 다중 레이다 융합 시스템을 위한 추적 관리 구조 선정 = Track management architecture for distributed multiple radar fusion systemlink

이우철; 최한림; et al, 한국과학기술원, 2017

609
비디오스코프 및 회선신경망 기반 엔진 고압 압축기 블레이드 손상의 현장 진단 연구 = Study on in-field diagnosis of blades in high pressure compressor of engine based on videoscope and convolutional neural networkslink

김용호; 이정률; et al, 한국과학기술원, 2018

610
비례항법을 이용한 무인 항공기의 최적 충돌 회피 기동 = Proportional navigation-based optimal collision avoidance for UAVslink

한수철; Han, Su-Cheol; et al, 한국과학기술원, 2005

611
비선형 거동을 고려한 복합적층 패널의 공력열탄성 해석 = Aerothermoelastic analysis of composite laminated panel considering nonlinear behaviorlink

오일권; Oh, Il-Kwon; et al, 한국과학기술원, 1997

612
비선형 와류격자법을 이용한 낮은 종횡비 날개의 공력특성 예측 = Estimation of low aspect ratio wing aerodynamics using nonlinear vortex lattice methodlink

이태승; Lee, Tae-Seung; et al, 한국과학기술원, 2008

613
비선형 힌지를 갖는 접는 미사일 조종날개에 대한 모델 수립 및 동적 특성 = Dynamic characteristics and model establishment of deployable missile control fin with nonlinear hingelink

김대관; Kim, Dae-Kwan; et al, 한국과학기술원, 2003

614
비압축성 점성 유동해석을 위한 비정렬 격자 유한 요소법의 연구 = Study of an unstructured finite element method for incompressible viscous flow analysislink

서정수; Suh, Jung-Soo; et al, 한국과학기술원, 1992

615
비압축성 층류 경계층 유동에 의한 대칭형 공동의 수치적 연구 = Numerical analysis of the incompressible laminar shear layer of symmetric cavitylink

권세진; Kwon, Se-Jin; et al, 한국과학기술원, 1984

616
비점성 박리 모델을 이용한 받음각을 갖는 회전체 주위에서의 유동장 계산 = Calculation of the flow about a body of revolution at incidence using inviscid separated flow modellink

이응호; Lee, Eung-Ho; et al, 한국과학기술원, 1985

617
비점성 천음속 유동해석을 위한 다중격자 유한요소법의 연구 = A multi-grid finite element method for inviscid transonic flow analysislink

박기철; Park, Ki-Cheol; et al, 한국과학기술원, 1990

618
비정렬 격자계를 이용한 와류 고리 상태 유동 해석 = Detailed flow analysis of vortex ring state using an unstructured mesh flow solverlink

이희동; Lee, Hee-Dong; et al, 한국과학기술원, 2003

619
비정렬 격자계에서 고차정확도 불연속 갤러킨 기법을 이용한 Navier-Stokes 유동 해석자 개발 = Development of a Navier-Stokes flow slover using high-order discontinuous galerkin method on unstructured mesheslink

최재훈; Choi, Jae-Hoon; et al, 한국과학기술원, 2011

620
비정렬 격자계에서 고차정확도 불연속 갤러킨 기법을 이용한 Navier-Stokes 유동 해석자 개발 = Development of a Navier-Stokes flow slover using high-order discontinuous galerkin method on unstructured mesheslink

최재훈; Choi, Jae-Hoon; et al, 한국과학기술원, 2011

621
비정렬 격자계에서의 예조건화를 이용한 비점성 비정상 유동해석 기법 = Preconditioning methods for unsteady inviscid flow on unstructured gridslink

남화진; Nam, Hwa-Jin; et al, 한국과학기술원, 2001

622
비정렬 격자기법을 이용한 내부 무장창의 유동 특성과 무장 분리 운동에 관한 수치적 연구 = Numerical simulation of flow characteristics and store separation of internal weapons bay using an unstructured mesh techniquelink

김덕현; Kim, Duk-Hyun; et al, 한국과학기술원, 2013

623
비정렬 격자를 사용한 로터-동체 상호간섭효과 해석 = Rotor-fuselage interactional aerodynamic analysis using unstructured mesheslink

이종국; Lee, Jong-Kook; et al, 한국과학기술원, 1999

624
비정렬 격자를 이용한 Euler Code의 병렬처리 기법 = Parallel processing for an Euler Code using unstructured gridlink

김성호; Kim, Sung-Ho; et al, 한국과학기술원, 1994

625
비정렬 동적 격자를 이용한 상대운동이 있는 물체 주위의 2차원 비정상 유동해석 = Two-dimensional unsteady flows around bodies with relative motion using unstructured mesheslink

백경욱; Baek, Kyoung-Wook; et al, 한국과학기술원, 1997

626
비정렬 적응 격자를 이용한 블레이드-와류 간섭에 따른 공탄성 변형 예측 = Prediction of aeroelastic deformation under close BVI using unstructured adaptive mesheslink

조규원; Jo, Kyu-Won; et al, 한국과학기술원, 2002

627
비정렬 적응격자를 이용한 압축성 유동의 최적가중함수 유한요소해석과 고해상도 기법에 관한 연구 = Adaptive upwind finite element method using exponential weighting functions with unstructured mesh and high resolution techniqueslink

성춘호; Sung, Chun-Ho; et al, 한국과학기술원, 1996

628
비정렬 중첩 격자기법을 이용한 풍력터빈 블레이드의 공력 해석에 관한 수치적 연구 = Numerical simulation of the aerodynamic analysis of wind turbine rotor blades using an unstructured overset mesh techniquelink

김다혜; Kim, Da-Hye; et al, 한국과학기술원, 2010

629
비정렬 중첩 격자기법을 이용한 헬리콥터 요소간 공력간섭에 대한 수치적 연구 = Numerical simulation of the interaction effect of helicopter components using an unstructured overset mesh techniquelink

하현석; Ha, Hyun-Seok; et al, 한국과학기술원, 2009

630
비정렬 중첩 격자기법을 통한 동축반전 로터의 간섭현상에 관한 수치적 연구 = Numerical simulation of interaction effects on a coaxial rotor using an unstructured overset mesh methodlink

이종혁; Lee, Jong-Hyuk; et al, 한국과학기술원, 2009

631
비정렬 중첩격자계를 이용한 서로 겹쳐진 물체들 간의 상대운동 해석기법에 관한 연구 = An unstructured chimera technique for overlapped bodies in relative motionlink

안상준; An, Sang-Jun; et al, 한국과학기술원, 2006

632
비정렬 혼합격자계 유동 해석을 위한 고차-고해상도 수치기법 개발 = Development of high-order and high-resolution scheme on unstructured mixed mesh flow solverlink

박상현; 권오준; et al, 한국과학기술원, 2018

633
비정렬 혼합격자계 유동 해석자를 이용한 끝단 형상에 따른 로터 공력특성에 관한 수치적 연구 = Numerical study of rotor aerodynamic performances with various tip shapes an unstructured mixed mesh flow solverlink

황제영; Hwang, Je Yeong; et al, 한국과학기술원, 2015

634
비정렬격자를 사용한 2차원 유동의 직접모사법 개발 = DSMC technique of 2-D flows on unstructured triangular mesheslink

김민규; Kim, Min-Gyu; et al, 한국과학기술원, 1998

635
비정상 압축성 램프 유동의 2차원 Navier-Stokes 계산 = Navier-Stokes computational of a two dimensional unsteady compression ramp flowlink

박정응; Park, Jung-Eung; et al, 한국과학기술원, 1999

636
비정상 유동 해석을 위한 병렬화된 비정렬 중첩 격자기법 개발 = Development of an unstructured parallel overset mesh technique for unsteady flow simulationslink

정문승; Jung, Mun-Seung; et al, 한국과학기술원, 2004

637
비평형 상태 해석을 위한 효율적인 직접 모사법 개발 = Development of an efficient DSMC technique considering nonequilibrium effectlink

김재강; Kim, Jae-Gang; et al, 한국과학기술원, 2005

638
비행체 배기플룸의 적외선 복사 해석에 대한 수치적 연구 = Numerical prediction of infrared radiation of flight vehicle exhaust plumelink

조성민; Jo, Sung Min; et al, 한국과학기술원, 2016

639
비행체 비선형 제어를 위한 비선형 상태변수 관측기 설계에 관한 연구 = Nonlinear state-observer design techniques for nonlinear flight controllink

이훈구; Lee, Hun-Gu; et al, 한국과학기술원, 1994

640
비행후 데이타 해석을 통한 항공기 공력계수의 식별 = Identification of aerodynamic coefficients based on post-flight data analysislink

류창경; Ryoo, Chang-Kyung; et al, 한국과학기술원, 1990

641
사다리꼴 단면 항력 계수 측정 = Drag measurements of cylinders having trapezoidal cross-sectionlink

고범용; Koh, Bum-Yong; et al, 한국과학기술원, 1998

642
사출 성형에 의해 제작된 다중벽 탄소 나노튜브/PMMA 복합재의 기계적 물성에 관한 연구 = A study on mechanical properties of MWNT/PMMA composites fabricated by injection molding processlink

이원준; Lee, Won-Jun; et al, 한국과학기술원, 2004

643
삼각형의 단면 굴곡을 갖는 반무한 표면 위에서의 3차원 층류 경계층 유동 = Three-dimensional laminar boundary layer flow over a semi-infinite surface with linerarly-corrugated cross-sectionlink

오정권; Oh, Jeong-Kwon; et al, 한국과학기술원, 1982

644
상대운동이 있는 물체주위의 유동장 해석을 위한 적응격자기법 연구 = A study of adaptive refinement method for analysis of the flow field around bodies with relative motionlink

김대희; Kim, Dae-Hee; et al, 한국과학기술원, 2000

645
상용 항공기 좌석 경량화를 위한 소재 대체 설계 기술 연구 = (A) study on material substitution design method for weight reduction of commercial aircraft passenger seatlink

이상훈; 김천곤; et al, 한국과학기술원, 2017

646
상호작용하는 두 스월 안정화 화염의 연소불안정 제어를 위한 대칭성 붕괴 기법 = Symmetry-breaking for the control of combustion instabilities of two interacting swirl-stabilized flameslink

김대건; 김규태; et al, 한국과학기술원, 2018

647
샌드위치 구조를 갖는 전자기파 흡수체에 관한 연구 = A study on electromagnetic wave absorbing sandwich structureslink

박기연; Park, Ki-Yeon; et al, 한국과학기술원, 2004

648
샌드위치구조를 이용한 충격손상방지 구조물 = Impact damage protection in composite structure using sandwich structure conceptlink

김성준; Kim, Sung-Joon; et al, 한국과학기술원, 1994

649
석탄 입자와 공기 혼합물에서의 화염 전파에 관한 연구 = A study on flame propagation through a mixture of coal particles and airlink

윤길원; Yun, Gil-Won; et al, 한국과학기술원, 1987

650
선형 격자 형성 방정식을 이용한 직교 격자 형성에 관한 연구 = Orthogonal grid generation using linear grid generating equationslink

이상욱; Lee, Sang-Wook; et al, 한국과학기술원, 2000

651
선형 비연관 방정식과 등각 변환법을 이용한 3차원 격자 구성 기법 연구 = A study on 3-dimensional grid generation using linear uncoupled equations and conformal transformationlink

김재욱; Kim, Jae-Wook; et al, 한국과학기술원, 1999

652
선형 안정성 이론을 이용한 압축성 축 대칭 원뿔 경계층의 천이 지점 예측 = Transition predicton of compressible axi-symmetric boundary layers on a sharp cone by using linear stability theorylink

박동훈; Park, Dong-Hoon; et al, 한국과학기술원, 2008

653
선회화염의 유동장 특성에 관한 실험적 연구 = An experimental study on the flow field of the swirling flamelink

민대기; Min, Dai-Ki; et al, 한국과학기술원, 1985

654
섬유방향 파손이 있는 [90n/0m]s 복합적층판의 층간분리 = Delamination of [90n/0m]s laminate with transverse cracklink

이세영; Lee, Se-Yong; et al, 한국과학기술원, 1988

655
성능과 소음을 고려한 축류팬의 설계 프로그램 개발 = Development of axial fan design program considering performance and noiselink

김병주; Kim, Byung-Joo; et al, 한국과학기술원, 2004

656
수동형 호우밍 미사일의 요격성능 향상을 위한 적응 단속기동 = Adaptive intermittent maneuvers for intercept performance improvement of passive homing missilelink

류혁; Ryu, Hyeok; et al, 한국과학기술원, 1991

657
수정된 ENF 시편을 이용한 복합재료 혼합 모우드 층간파괴인성치 평가 = Evaluation of mixed mode interlaminar fracture toughness of composites by modified ENF specimenlink

정안균; Jeong, An-Kyun; et al, 한국과학기술원, 1990

658
수정된 Random vortex method 를 이용한 난류유동의 수치적 해석 = Numerical simulation of turbulent flow behind a bluff body using a modified random vortex methodlink

하지수; Ha, Ji-Soo; et al, 한국과학기술원, 1985

659
수직발사체의 초기 안정성 및 제어에 관한 연구 = A study on the initial stability and control of a launch vehiclelink

박영웅; Park, Young-Woong; et al, 한국과학기술원, 1995

660
수치 최적화 기법을 이용한 풍력 터빈 블레이드 단면의 공력 최적 설계 = Aerodynamic sectional design optimization for wind turbine rotor blades by a numerical optimization techniquelink

권형일; Kwon, Hyung-Il; et al, 한국과학기술원, 2011

rss_1.0 rss_2.0 atom_1.0