Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 901 to 920 of 1858

901
STEP 방법론을 따른 CAD 데이터의 가공과 공유 = Enhancement to share CAD models based on STEP methodologylink

신용재; Shin, Yong-Jae; et al, 한국과학기술원, 1999

902
Stiffener layout optimization to maximize natural frequencies of a structure using evolution strategies and geometry algorithms = 진화 전략 및 기하 알고리즘을 이용한 구조물의 고유 진동수 극대화를 위한 보강재 배치 최적화link

Lee, Joon-Ho; 이준호; Park, Youn-Sik; Park, Young-Jin; et al, 한국과학기술원, 2005

903
Stochastic estimation of human forearm and wrist impedance using robots = 로봇을 이용한 사람 전완과 손목 관절 임피던스의 추계학적 추정link

Park, Kyung-Bin; 박경빈; et al, 한국과학기술원, 2012

904
Strain localization in an orthotropic elastoplastic and elasto-viscoplastic material = 직교이방 탄소성 및 탄-점소성 재료의 변형률 집중link

Lee, Haeng-Soo; 이행수; et al, 한국과학기술원, 1995

905
Strain localization in thermoviscoplastic materials = 열점소성 재료에서의 변형률 집중link

Kim, Hyun-Gyu; 김현규; et al, 한국과학기술원, 1998

906
Strain-rate dependent anisotropic yield criteria for auto-body steel sheets = 자동차용 강판의 변형률속도 의존 이방성 항복함수에 관한 연구link

Huh, Jee-Hyang; 허지향; et al, 한국과학기술원, 2013

907
Strain-smoothed element method for improving low-order solid and shell finite elements = 저차 솔리드 및 쉘 유한요소의 향상을 위한 변형률 완화 요소법link

Lee, Chaemin; Lee, Phill-Seung; et al, 한국과학기술원, 2020

908
Stretched leg walking for a humanoid robot = 인간형 이족 보행 로봇의 다리를 펴고 걷는 보행에 관한 연구link

Kim, Min-Su; 김민수; et al, 한국과학기술원, 2009

909
Structural system identification and strain measurement based model updating with closed-loop data = 페루프 정보를 이용한 구조 시스템 규명 및 스트레인 측정 기반의 모델 개선link

Ha, Jae-Hoon; 하재훈; Park, Young-Jin; 박영진; et al, 한국과학기술원, 2007

910
Structures and statistics of an adverse pressure gradient turbulent boundary layer = 역압력 구배 난류 경계층의 구조와 통계link

Yoon, Min; Sung, Hyung Jin; et al, 한국과학기술원, 2019

911
Studies on Design and Properties of Metal-supported Solid Oxide Fuel Cell: Electrode material, Cell and Stack = 금속지지체형 고체산화물 연료전지의 설계 및 특성에 관한 연구 : 전극물질, 셀, 스택link

Baek, Seung-Wook; 백승욱; et al, 한국과학기술원, 2010

912
Studies on mass transfer enhancement in a cathode channel of a polymer electrolyte membrane fuel cell using a pulsating flow = 고분자 전해질막 연료전지 공기극에서의 맥동유동을 이용한 물질전달 촉진에 관한 연구link

Han, Hun-Sik; 한훈식; et al, 한국과학기술원, 2012

913
Studies on reaction rate and effectiveness factor of noble metal catalysts for fuel processing = 연료개질용 귀금속 촉매의 반응속도와 유효인자에 대한 연구link

Lim, Sung-Kwang; 임성광; et al, 한국과학기술원, 2009

914
Study of cobalt-based perovskite cathodes for intermediate temperature-operating solid oxide fuel cell = 중.저온형 고체산화물 연료전지를 위한 Cobalt 기반 페로브스카이트 구조의 공기극 특성에 관한 연구link

Kim, Jung-Hyun; 김정현; et al, 한국과학기술원, 2009

915
Study of diesel low temperature steam reforming for solid oxide fuel cell application = 고체산화물 연료전지 적용을 위한 디젤 저온 수증기 개질에 관한 연구link

Lee, Sangho; 이상호; et al, 한국과학기술원, 2015

916
Study on a critical heat flux model for pool boiling based on two different mechanisms: rewetting limit and capillary limit = 서로 다른 두 개의 기작에 기반한 풀비등 임계열유속 모델에 관한 연구: 젖음 한계와 모세관력 한계link

Kim, Minchang; Kim, Sung Jin; et al, 한국과학기술원, 2022

917
Study on carbon monoxide preferential oxidation over copper/ceria based catalysts for low temperature proton exchange membrane fuel cell system = 저온 고분자 전해질 연료전지 시스템을 위한 Copper/Ceria계 촉매의 일산화탄소 선택적 산화반응에 관한 연구link

Oh, Jiwoo; Bae, Joongmyeon; et al, 한국과학기술원, 2018

918
Study on electrochemical performance and Cr poisoning phenomena at $(Ba,Sr)(Co,Fe)O3_{-δ}$ Cathode for Solid Oxide Fuel Cell = 고체산화물 연료전지용 $(Ba,Sr)(Co,Fe)O3_{-δ}$ 공기극의 전기화학적 특성 및 Cr 피독현상에 관한 연구link

Kim, Yu-Mi; 김유미; et al, 한국과학기술원, 2011

919
Study on envelopes for vacuum maintenance of vacuum insulation panels = 진공단열패널의 진공 유지를 위한 외피에 관한 연구link

Jung, Hae-Yong; 정해용; et al, 한국과학기술원, 2013

920
Study on fabrication and electrode properties for butane-fueled intermediate temperature solid oxide fuel cell = 부탄 연료를 이용한 중온형 고체산화물 연료전지의 제조 및 전극물성연구link

Park, Kwang-jin; 박광진; et al, 한국과학기술원, 2010

rss_1.0 rss_2.0 atom_1.0