904 | PAD 선단의 압력 발생을 고려한 피봇식 추력 베어링의 성능 해석 = An analysis of the performance of pivoted pad thrust bearing in consideration of the ram pressure of oil filmlink 이재천; Lee, Jae-Cheon; et al, 한국과학기술원, 1985 |
905 | Particle beam focusing using radiation pressure = 광압을 이용한 입자빔 집속link Kim, Sang-Bok; 김상복; et al, 한국과학기술원, 2004 |
906 | Particle separation and chemical gradient control via focused travelling surface acoustic waves = 집중적인 표면 진행 탄성파를 이용한 입자 분리 및 화학적 구배 제어link Destgeer, Ghulam; Destgeer, Ghulam; et al, 한국과학기술원, 2013 |
907 | Particle-in-cell 방법을 이용한 입상재료 유동의 탄소성 모델 해석 = Particle-in-cell analysis of the flow of granular material with elasto-plastic modellink 연정흠; Yeon, Jeoung-Heum; et al, 한국과학기술원, 1998 |
908 | Path optimization for cooperative mapping with multiple-agents = 다개체 시스템의 협력적 매핑을 위한 경로 최적화link Kim, Kyungseo; Kim, Jinwhan; et al, 한국과학기술원, 2021 |
909 | PCB내의 온도 분포를 고려한 칩의 최적배치에 관한 연구 = A study of layout design of chips on PCB considering temperature distributionlink 조지현; Cho, Ji-Hyon; et al, 한국과학기술원, 1998 |
910 | PC기반 WEDM용 개방형 수치제어장치의 MMI에 관한 연구 = A study on the MMI of the PC-based open WEDM NC systemlink 권신; Kwon, Sin; et al, 한국과학기술원, 1999 |
911 | PDMS 기반 마이크로 구조의 복사냉각 성능에 관한 연구 = Investigation of radiative cooling performance of PDMS-based microstructurelink 이승윤; 이봉재; et al, 한국과학기술원, 2019 |
912 | Perfect absorption of sound using curved metasurface = 곡면형 메타표면을 이용한 완벽 흡음link Kim, Jiwan; Jeon, Wonju; et al, 한국과학기술원, 2020 |
913 | Performance and emission characteristics in a spark-ignition LPG engine with exhaust gas recirculation = EGR장착 스파크점화 LPG엔진의 성능 및 배기 특성link Cho, Yoon-Ho; 조윤호; et al, 한국과학기술원, 2001 |
914 | Performance evaluation for noise abatement of some muffler configurations = 소음기 배열 형상에 따른 소음감소 능력 평가link Lee, Jeong-Guon; 이정권; et al, 한국과학기술원, 1981 |
915 | Performance evaluation of an oxy-coal-fired power generation system : thermodynamic evaluation of power cycle = 순산소 석탄 연소 발전 시스템의 성능 평가 : 동력사이클의 열역학적 해석link Lee, Kwang-Jin; 이광진; et al, 한국과학기술원, 2010 |
916 | Performance evaluation with impurity effects as a part of conceptual design of oxy-coal combustion power generation system = 순산소 석탄 연소 발전시스템에서 불순물의 영향에 따른 시스템 성능 특성에 관한 연구link Kim, Sung-Eun; 김성은; et al, 한국과학기술원, 2010 |
917 | Performance improvement of an iron ore sintering bed through the enriched oxygen supply operation = 산소 부분 부화를 통한 제선 소결 베드 성능개선에 관한 연구link Kang, Hee-Jin; 강희진; et al, 한국과학기술원, 2011 |
918 | Performance improvement of low bandwidth active suspension system by road disturbance preview control = 예견 제어를 통한 저대역폭 능동 현가장치 시스템의 성능 향상에 관한 연구link Sadek Sayed Kamal, Ahmed Ehab; Choi, Sei Bum; et al, 한국과학기술원, 2017 |
919 | Performance of annular heat pipe and optimization of heat recovery unit with heat pipes = 환상 열파이프의 특성 및 열파이프를 응용한 열회수장치의 최적화에 관한 연구link Song, Tae-Ho; 송태호; et al, 한국과학기술원, 1979 |
920 | Performance of lower-extremity exercise-based muscle fatigue and recovery model = 하지 운동 수행 능력 기반의 근육 피로와 회복 모델 개발link Chi, Ailian; Koo, Seungbum; et al, 한국과학기술원, 2023 |
921 | Perspective and 360° equirectangular projection image-based stereo-monocular distance estimation with online calibration = 원근투영법 및 360° 등장방형도법 영상을 활용한 양안-단안기반 거리 추정 및 외부 매개변수 교정link Jung, Heechan; Yoon, Kuk-Jin; et al, 한국과학기술원, 2020 |
922 | Phase-matched generation of coherent euv light by propagating localized field in plasmonic waveguide = 플라즈몬 도파로 내부의 증폭된 전기장에 의한 위상정합된 결맞음 극자외선 생성link Choi, Joon-Hee; 최준희; et al, 한국과학기술원, 2010 |
923 | Piezoelectrically driven single- and dual-axis rotational micromirrors for large angular motion = 회전각 증대를 위한 압전 구동형 회전 미소거울의 설계,제작 및 시험link Kim, Sung-Jin; 김성진; et al, 한국과학기술원, 2002 |
924 | Plate-fin heat sink 와 pin-fin heat sink 의 유동 및 열적 특성 비교 = Comparison of fluid flow and thermal characteristics between the plate-fin and pin-fin heat sinkslink 오환희; Oh, Hwan-Hee; et al, 한국과학기술원, 2005 |
925 | Platen-munters 형 흡수식 냉동기의 최적 설계 = A study on the optimization of absorption refrigerating system of platen-munters typelink 이재효; Lee, Jai-Hou; et al, 한국과학기술원, 1977 |
926 | PLIB 파트 42를 이용한 자동차 부품의 데이터 사전 = A data dictionary for automotive parts based on PLIB part42link 김영범; Kim, Young-Bum; et al, 한국과학기술원, 2001 |
927 | Point-based persistent identification of transition features for parametric CAD data exchange = 파라메트릭 CAD 데이터 교환을 위한 천이 특징형상의 점 기반 고유 명칭link Safdar, Mutahar; Han, Soonhung; et al, 한국과학기술원, 2020 |
928 | Portable pneumatic back support exoskeleton and assistive strategy for lifting assistance = 리프팅 보조를 위한 휴대형 공압식 허리보조 외골격 로봇과 그 보조 전략link Heo, Ung; Kim, Jung; et al, 한국과학기술원, 2020 |
929 | Position Estimation of Zone of Different Young’s Modulus Using Deformation Imaging and Convolutional Neural Network = 이종 영계수를 가진 영역의 위치를 변형 영상 합성곱 신경망을 이용해 추정하는 방법link Kim, Gyeonghyun; Lee, Doo Yong; et al, 한국과학기술원, 2022 |
930 | Position sensor with PDMS and stretchable electrode for measuring abrasion of rifling = 강선 마모 측정을 위한 PDMS와 신축적 전극을 가진 위치센서link Lee, Seok-Chan; 이석찬; et al, 한국과학기술원, 2009 |
931 | Power cycling하에서의 웨이퍼 레벨 CSP assembly의 열변형에 관한 연구 = A study on the thermal deformations of wafer-level CSP assembly under power cyclinglink 조만석; Cho, Man-Seok; et al, 한국과학기술원, 2001 |
932 | $PrBaMn_2O_{5+δ}$ 의 함침을 이용한 가역 고체산화물 연료전지 연료극 설계에 대한 연구 = Study on fuel electrode design by using $PrBaMn_2O_{5+δ}$ infiltration for reversible solid oxide fuel cellslink 권영진; 배중면; et al, 한국과학기술원, 2017 |
933 | Precision-enhanced two photon fluorescence lifetime imaging microscopy with controlled repetition rate = 이광자 형광 수명 이미징 현미경의 펄스 반복률 조절을 통한 정밀도 향상link Song, Jeonggeun; Yoo, Hongki; et al, 한국과학기술원, 2021 |
934 | Predicting glass transition temperature with tBA-co-DEGDA compositions and 4D printing factors based on design of experiment and machine learning = 실험계획법과 기계학습을 활용한 tBA-co-DEGDA 구성과 4D 프린팅 공정 인자 변화에 따른 유리 전이점 예측link Kim, Jeong-Hwan; Yoon, Yong-Jin; et al, 한국과학기술원, 2021 |
935 | Predicting potential members of a logistics network platform using recommender systems = 추천 시스템을 사용하여 물류 네트워크 플랫폼의 잠재적 구성원 예측link Mintchev Krassimirov, Maxim; Lee, Jungchul; 이정철; Lee, Bong Jae; et al, 한국과학기술원, 2023 |
936 | Predicting stress between human body and wearable equipment using the soft tissue mass-spring model = 연조직 질량 스프링 모델을 이용한 인체와 착용장비 사이의 응력 예측link Park, Jonghyeon; 박종현; et al, 한국과학기술원, 2024 |
937 | Prediction and control of the transient oscillating flow in Czochralski convection = 초크랄스키 대류진동에서의 진동예측 및 제어link Choi, Jung-Il; 최정일; et al, 한국과학기술원, 1996 |
938 | Prediction of cold forging tool-life based on finite element analyses = 유한요소해석에 기반한 냉간 단조 수명 예측link Sarosh, Muhammad Adnan; 사루시, 모하메드 아드난; et al, 한국과학기술원, 2006 |
939 | Prediction of dynamic characteristics of machine tool structure - an application to ED-18 lathe = 공작기계의 동적 특성에 대한 예측 - ED -18 선반에 대한 적용link Ahn, Doo-Seung; 안두성; et al, 한국과학기술원, 1980 |
940 | Prediction of failure of strength differential materials by using cohesive zone model = 응집영역모델을 이용한 강도 차이 재료의 접촉면 분리 예측link Sagong, Cheol; Yoon, Jeong Whan; et al, 한국과학기술원, 2021 |
941 | Prediction of heat transfer with $k-ε-f_μ$ model for an impinging jet flow = $k-ε-f_μ$ 모델에 의한 충돌젯의 열전달에 관한 수치적 연구link Hahm, Su-Ok; 함수옥; Kim, Moon-Uhn; Sung, Hyung-Jin; et al, 한국과학기술원, 1998 |
942 | Prediction of sound decay curves and speech intelligibility by using ray tracing technique = 레이 트레이싱 기법을 이용한 실내의 음향특성 추정link Kim, Yu-Man; 김유만; et al, 한국과학기술원, 1987 |
943 | Prediction of temperature distribution in the two-dimensional bodies with heat source and radiation exchange present at the surface = 表面에서 熱源과 輻射熱交換이 있는 二次元 物體의 溫度分布 決定link Hong, Dong-Pyo; 홍동표; et al, 한국과학기술원, 1980 |
944 | Prediction of thermal buckling in sheet metal structures based on finite element modeling and its experimental verification = 판금 구조물의 열좌굴 예측을 위한 유한요소 모델링과 실험적 검증link Lee, Juwon; Yoon, Jeong Whan; et al, 한국과학기술원, 2022 |
945 | Prediction of transient oscillating flow in czochralski convection = czochralski 대류 진동 유동 예측link Jung, Young Jean; 정영진; et al, 한국과학기술원, 1994 |
946 | Pressure sensitive paint를 이용한 압력장 측정 기술의 이미지 등록에 관한 연구 = Assessment of image registration for pressure sensitive paintlink 장영기; Chang, Young Ki; et al, 한국과학기술원, 2002 |
947 | Prototype 이온 질화 장치 개발 연구 = Development of pilot type ion-nitriding systemlink 김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1979 |
948 | Pseudo-channel 효과를 활용한 바나듐 레독스 흐름 전지용 카본 페이퍼 적층 전극 설계 = Design of stacked carbon paper electrodes with pseudo-channel effect for the vanadium redox flow batterylink 정재문; 김성수; et al, 한국과학기술원, 2020 |
949 | PSP를 이용한 압력 측정 기술 = Development of pressure measurement technique using pressure sensitive paintlink 윤우열; Yoon, Woo-Youl; 성형진; 정명균; et al, 한국과학기술원, 2002 |
950 | Psychoacoustic evaluation of warning sounds of electric vehicles in the viewpoint of detectability and annoyance = 인지성과 불쾌감 관점에서의 전기차 경고음의 심리음향적 평가link Gustav Nordahl, Jacobsen; 구스타브 노달, 야콥슨; et al, 한국과학기술원, 2016 |
951 | PUMA-760 로보트의 동적 파라미터 identification 에 관한 연구 = A study on dynamic parameter identification of PUMA-760 robotlink 문전일; Moon, Jeon-Ill; 이종원; 조형석; et al, 한국과학기술원, 1986 |
952 | PUMA-760 로보트의 손목 서보제어장치에 관한 연구 = A study on the wrist servo-controller of PUMA-760 robotlink 이상열; Lee, Sang-Yeal; 이종원; 조형석; et al, 한국과학기술원, 1986 |
953 | Quadtree 기법을 이용한 2차원 자동격자 구성 프로그램의 개발 = Automatic two-dimensional mesh generation using quadtree methodlink 이주식; Lee, Ju-Sik; 곽병만; 윤용산; et al, 한국과학기술원, 1988 |
954 | Quantification of the Interactions between Flow and Laser-Induced Plasma = 유동과 레이저 유도 플라즈마 사이의 상호작용 정량화link Yi, Junghwa; Bae, Choongsik; et al, 한국과학기술원, 2019 |
955 | Quantifying dynamic joint stability of foot joints during walking using bi-planar fluoroscopic images = 두 방향 엑스선 영상을 이용한 보행 중 족부 관절의 동적 안정성 연구link Boo, Junyo; Koo, Seungbum; et al, 한국과학기술원, 2022 |
956 | Quantitative analysis for fracture behavior of fuel cells = 연료전지에서의 파괴 거동의 정량적 분석link Jang, Kyung-Lim; 장경림; et al, 한국과학기술원, 2016 |
957 | Quantitative analysis of passive wrist tremor suppression method to minimize voluntary motion deterioration = 피동적 떨림 억제 장치의 자의적 움직임 저해 최소화 방법에 대한 정량적 분석link Kim, Yun-Joo; 김연주; et al, 한국과학기술원, 2014 |
958 | Quantitative assessment of human sensitivity of scanning in lump detection = 사람의 손가락 스캐닝 동작에서의 혹 발견 민감도의 정량적 평가link Lee, Dong-Ju; 이동주; et al, 한국과학기술원, 2013 |
959 | R14와 질소 혼합물을 작동유체로 하는 극저온 열사이펀의 과도상태 특성 = Transient operation of cryogenic thermosiphon using R14 and Nitrogen mixture as the working fluidlink 이지성; Lee, Ji-sung; et al, 한국과학기술원, 2009 |
960 | Rayleigh scattering에 의한 평면 혼합경계층에서의 가스농도변동성분 측정에 관한 실험적 연구 = Rayr[l]eigh scattering measurement of the gas concentration field in plane mixing layerslink 고한중; Ko, Han-Jung; et al, 한국과학기술원, 1989 |
961 | Rayleigh 산란 기법을 이용한 단일 와환의 실험적 연구 = An experimental study on the single vortex ring using rayleigh scattering methodlink 최재준; Choi, Jae-Joon; et al, 한국과학기술원, 1999 |
962 | RCCL(robot control C library)를 이용한 범용제어기의 다중 로봇 제어 = Implementation of RCCL (robot control C library) on universal controller and controlling the multi-robotlink 이성욱; Lee, Sung-Uk; et al, 한국과학기술원, 1995 |
963 | RCEM을 이용한 희박 LPG 혼합물에 대한 고에너지 점화장치의 착화성능 가시화 연구 = A visualization study on ignition performance of high energy ignition system for LPG lean mixture utilizing RCEMlink 김창업; Kim, Chang-Up; et al, 한국과학기술원, 1993 |