2651 | 아아크 열분사 과정에 있어서 열흐름에 관한 연구 = A study on the heat flow in arc spraying processlink 배강열; Bae, Kang-Yul; et al, 한국과학기술원, 1986 |
2652 | 아아크 열분사 피복층의 열유동 및 레이저 처리에 관한 연구 = A study on the heat flow and laser treatment of arc sprayed coatingslink 김원배; Kim, Weon-Bae; et al, 한국과학기술원, 1988 |
2653 | 아치형 구조 내 주기적 재료 배열을 통한 음향 밴드갭 진동 마운트 설계 = Design of vibration isolator using acoustic bandgap through periodic material arrangement in arched structurelink 문혜미; 김성수; et al, 한국과학기술원, 2021 |
2654 | 아크 센서의 신호 특성 및 용접선 추적을 위한 응용 = Signal characteristics of arc sensor and application to seam trackinglink 선우희권; Sunwoo, Hee-Kwon; et al, 한국과학기술원, 1996 |
2655 | 아크 안정성 평가를 위한 용접 전류 및 전압 파형 분석 알고리즘 개발에 관한 연구 = Development of an analysis algorithm of welding current and voltage for arc stability evaluationlink 강성구; Kang, Sung-Koo; et al, 한국과학기술원, 1997 |
2656 | 아크 용접공정에서 용접선의 실시간 추적을 위한 시각 시스템 = A vision system for real-time weld seam tracking in arc welding processeslink 김호학; Kim, Ho-Hack; et al, 한국과학기술원, 1989 |
2657 | 안정적인 파지를 위한 로봇 핸드 개발 = Development of robot hand for stable graspinglink 이호주; Lee, Ho-Ju; et al, 한국과학기술원, 2012 |
2658 | 안정화 절점적분이 적용된 이동최소제곱 기반 유한요소 = MLS(Moving Least Square)-based finite elements using a stabilized conforming nodal integrationlink 이준호; Lee, Jun-Ho; et al, 한국과학기술원, 2007 |
2659 | 앉은 자세 인체의 수직 방향 가진에 대한 동적 응답 특성화 및 시트용 폼의 전달률 예측에의 응용 = Dynamic characterization of human body in seated posture in vertical direction and its application to prediction of transmissibility of seat foamslink 송수연; Song, Su-Yon; et al, 한국과학기술원, 2001 |
2660 | 알루미나 성형체의 미소구멍가공에 관한 연구 = Micro-drilling of alumina green bodylink 이학구; Lee, Hak-Gu; et al, 한국과학기술원, 2002 |
2661 | 알루미나 세라믹과 구리의 브레이징 접합물에 대한 열응력의 유한요소법 해석에 관한 연구 = A study on the thermal stress analysis of alumina ceramics to copper brazement by finite element methodlink 전창훈; Jhon, Chang-Hoon; et al, 한국과학기술원, 1989 |
2662 | 알루미나계 쎄라믹 사출성형에 대한 기초연구 = A basic study of alumina ceramic injection moldinglink 나병철; Na, Byung-Chul; 오박균; 윤재륜; et al, 한국과학기술원, 1989 |
2663 | 알루미늄 7039 합금의 Lowcycle 피로 = Low cycle fatigue of Al 7039link 강기주; Kang, Kee-Joo; et al, 한국과학기술원, 1983 |
2664 | 알루미늄 딥 브레이징 접합부의 형상 예측과 접합 품질에 관한 연구 = Fillet geometry prediction and quality of aluminum dip brazed jointlink 윤석환; Yoon, Suk-Hwan; 유중돈; 나석주; et al, 한국과학기술원, 1998 |
2665 | 알루미늄 마이크로시편의 변형률속도에 따른 인장 특성 연구 = Study on the Strain-Rate Dependent Tensile Properties of Micro-Scale Aluminum Specimenslink 권준범; Kwon, Jun-Beom; et al, 한국과학기술원, 2012 |
2666 | 알루미늄 합금의 저항 점 용접시 온도 분포에 대한 연구 = A study on the temperature distributions in resistance spot welding of an aluminum alloylink 오세진; Oh, Sei-Jin; et al, 한국과학기술원, 1986 |
2667 | 알루미늄/CFRP 하이브리드 사각 중공빔의 충격하중에서의 에너지 흡수 특성 = Energy absorption characteristics of aluminum/CFRP square hollow section beam under the transverse impact loadinglink 김상영; Kim, Sang Young; et al, 한국과학기술원, 2016 |
2668 | 알루미늄/CFRP 하이브리드 사각 튜브의 탄소섬유 구조에 따른 충격 압궤 응답 및 에너지 흡수 특성 = Axial impact response and energy absorption characteristics of aluminum/CFRP hybrid square tube with different carbon fiber architecturelink 김준엽; 이정주; et al, 한국과학기술원, 2017 |
2669 | 알루미늄/GFRP 혼성 사각튜브의 정적 압축 붕괴 및 에너지 흡수 특성 = Axial crush and energy absorption characteristics of aluminum/GFRP hybrid square tubelink 김구현; Kim, Koo-Hyun; et al, 한국과학기술원, 2000 |
2670 | 알루미늄/GFRP 혼성튜브의 굽힘 붇괴 특성 = The bending collapse characteristics of aluminum/GFRP hybrid tubelink 송민철; Song, Min-Cheol; et al, 한국과학기술원, 2001 |
2671 | 알미늄합금 7075-T6와 구조강 SB41의 파괴인성과 피로균열성장에 관한 연구 = A study on the fracture toughness and fatigue crack growth rate of aluminum alloy 7075-T6 and structural steel SB41link 손갑헌; Sohn, Gap-Heon; et al, 한국과학기술원, 1977 |
2672 | 암-타입 안테나를 이용한 동적 감정 표현용 로봇헤드의 개발 = Design of a robot head with arm-type antennae for dynamic emotional expressionlink 송현수; Song, Hyun-soo; et al, 한국과학기술원, 2008 |
2673 | 암모니아 전기화학적 합성을 위한 고체산화물전해조 및 스캐폴드 전극 적용에 관한 연구 = (A) study on solid oxide electrolytic cells and introduction of scaffold-type electrodes for electrochemical ammonia synthesislink 이강용; 배중면; et al, 한국과학기술원, 2019 |
2674 | 압력 및 이산화탄소 희석에 따른 층류 메탄 비예혼합 화염 길이의 변화 = Length of laminar non-premixed methane flames with $CO_2$ dilution under elevated pressureslink 이지섭; 김남일; et al, 한국과학기술원, 2019 |
2675 | 압력 보상 유량 제어 밸브의 동특성에 관한 연구 = Study on the dynamic characteristics of a pressure compensated flow control valvelink 송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1976 |
2676 | 압력보상형 가변유량 펌프의 동특성에 관한 연구 = A study on the dynamic characteristics of a pressure-componsated variable displacement pumplink 김중찬; Kim, Joong-Chan; et al, 한국과학기술원, 1987 |
2677 | 압력스월식 분사기에서의 유동 특성 파악 = Internal flow characteristics in a high pressure swirl injectorlink 우동기; Woo, Dong-Gi; et al, 한국과학기술원, 1998 |
2678 | 압력에 따른 층류 제트 부상 화염의 화염 구조와 이론 해의 비교 및 개선 = Comparison and improvement of flame structure and theoretical solution of lifted laminar jet flames under various pressureslink 황규진; 김남일; et al, 한국과학기술원, 2020 |
2679 | 압연균질 장갑강의 모따기 가공에서 최적 절삭 조건에 대한 연구 = A Study on optimal cutting condition of chamfer milling for rolled homogeneous armor steellink 박상규; Park, Sang-Kyu; et al, 한국과학기술원, 2014 |
2680 | 압연용 roll 의 열처리를 위한 roll 내의 열전달 해석 = Analysis of heat transfer in back-up roll for its heat treatmentlink 김욱중; Kim, Ook-Joong; et al, 한국과학기술원, 1985 |
2681 | 압전 구동에 의한 초정밀 위치제어 = Ultraprecision position control using piezoelectric drivelink 정승배; Jeong, Seung-Bae; et al, 한국과학기술원, 1989 |
2682 | 압전 바이모프를 이용한 정밀 이동기구 개발에 관한 연구 = Micro actuator using piezoelectric bimorphlink 박한길; Park, Han-Gil; 곽윤근; 김수현; et al, 한국과학기술원, 2002 |
2683 | 압전 세라믹을 이용한 음향 탐촉자 설계 및 제작에 관한 연구 = Design and fabrication of microphone using piezoelectric ceramiclink 박영현; Park, Young-Hyun; et al, 한국과학기술원, 1994 |
2684 | 압전 세라믹을 이용한 진동형 채혈기의 개발 = Development of vibrating blood sampling device using PZTlink 송근복; Song, Keun-Bok; 박영진; 박윤식; et al, 한국과학기술원, 2004 |
2685 | 압전 재료를 이용한 발전 장치의 최적 설계 및 컴퓨터 주변장치에의 응용 = Design optimization for piezoelectric energy harvester and its application to computer mouselink 박주일; Park, Ju-Il; et al, 한국과학기술원, 2008 |
2686 | 압전구동 미소이송 연삭테이블의 개발과 경취재료의 연성모드 연삭에 관한 연구 = A development of piezoelectric driven micro-positioning grinding table and ductile regime grinding of brittle materialslink 남수룡; Nam, Soo-Ryong; et al, 한국과학기술원, 1995 |
2687 | 압전세라믹을 이용한 사각보형 진동자이로의 설계, 제작 및 평가 = Design and analysis of square beam type piezo-electric vibrating gyroscopelink 이정훈; Lee, Jeong-Hun; et al, 한국과학기술원, 1995 |
2688 | 압전소자 구동장치를 이용한 로봇 손목기구의 개발 = Development of a robot assembly wrist using piezoelectric actuatorslink 조영화; Joh, Young-Hwa; et al, 한국과학기술원, 1992 |
2689 | 압전소자를 이용한 선형 액츄에이터의 개발 = Development of linear actuator using piezoelectric elementslink 임영모; Lim, Young-Mo; et al, 한국과학기술원, 1994 |
2690 | 압전작동기를 이용한 병렬 트라이포드 매니퓰레이터의 제어 방법에 관한 연구 = Study on control method of parallel tripod manipulator using piezoelectric actuatorslink 김형건; 오일권; et al, 한국과학기술원, 2017 |
2691 | 압전형 가속도계의 설계, 제작 및 보정 = Design, fabrication and calibration of piezoelectric accelerometerlink 구경회; Koo, Gyeong-Hoi; et al, 한국과학기술원, 1989 |
2692 | 압전형 구동기를 갖는 이동기구의 운동 해석 및 제어 = Motion analysis and control of translation device driven by piezoelectric actuatorlink 이석구; Lee, Seok-Koo; et al, 한국과학기술원, 1991 |
2693 | 압전형 구동기를 이용한 2자유도 구조물의 능동 미소 진동 제어 = Active micro-vibration control of a two DOF structure by using a pair of piezoelectric actuatorslink 김미경; Kim, Mi-Gyoung; et al, 한국과학기술원, 1993 |
2694 | 압전형 다축 하중계의 설계, 제작 및 보정 = Design, fabrication and calibration of piezoelectric multiple component force transducerslink 박규연; Park, Kyoo-Yeon; et al, 한국과학기술원, 1990 |
2695 | 압전형 서어보 감쇠기를 이용한 시변 외팔보계의 진동 제어 = Vibration control of a time-varying flexible beam by using a piezoelectric servo-damperlink 김성대; Kim, Sung-Dae; et al, 한국과학기술원, 1992 |
2696 | 압전형 서어보 감쇠기를 이용한 외팔보계의 진동 제어 = Vibration control of a cantilever beam by using a piezoelectric servo-damperlink 이상호; Lee, Sang-Ho; et al, 한국과학기술원, 1991 |
2697 | 압축 공기를 이용한 2차원 평판 초공동 유동 실험연구 = Experimental study on the ventilated two-dimensional supercavity beneath a moving flat plate in a still fluidlink 남정현; Nam, Jeong-Hyeon; et al, 한국과학기술원, 2024 |
2698 | 압축성 근처 후류 해석을 위한 난류 모형의 비교 = Comparison of turbulence models for compressible near-wake flowlink 김성훈; Kim, Seong-Hoon; et al, 한국과학기술원, 1995 |
2699 | 압축성과 상변화를 고려한 사출성형 충전 및 충전 후 과정 연계 해석 = Coupled analysis of compressible filling and post-filling process of injection molding with phase changelink 한경희; Han, Hyeong-Hee; et al, 한국과학기술원, 1996 |
2700 | 압축성형 SMC 복합재료의 충격거동 예측에 관한 연구 = A study on impact behavior of compression molded sheet molding compounds compositeslink 이상민; Lee, Sang-Min; et al, 한국과학기술원, 1999 |
2701 | 압출공정의 금형과 보강링의 치수 최적설계 = Optimal design of dimensions of die and stress rings in extrusionlink 안성찬; An, Sung-Chan; et al, 한국과학기술원, 2000 |
2702 | 액체 스프레이 분사와 유동의 혼합에 관한 실험적 연구 = An experimental study on the mixing between liquid spary and gas flowlink 김영봉; Kim, Young-Bong; et al, 한국과학기술원, 2006 |
2703 | 액체분무의 증발 및 연소에 관한 수치적 연구 = A numerical study on evaporation and combustion of liquid spraylink 정인철; Jeong, In-Cheol; et al, 한국과학기술원, 1991 |
2704 | 액체의 점도와 분사압력이 액적 크기 분포의 균일도에 미치는 영향 = Effects of liquid viscosity and injection pressure on the uniformity of drop size distributionlink 조한권; Cho, Han-Gweon; et al, 한국과학기술원, 1989 |
2705 | 액체추진로켓의 포고현상 해석과 제어에 관한 연구 = A study on the analysis of pogo and its suppressionlink 장홍석; Chang, Hong-Suk; et al, 한국과학기술원, 2002 |
2706 | 액화 공기 에너지 저장 시스템을 위한 효율적인 냉열 저장소 개발 = Development of efficient cold storage for liquid air energy storage systemlink 김종권; 정상권; et al, 한국과학기술원, 2020 |
2707 | 얇은 막에 대한 열탄성 해석 = A thermo-elastic analysis of thin filmlink 김태완; Kim, Tae-Woan; et al, 한국과학기술원, 1989 |
2708 | 얇은 탄성쉘의 동특성 특정에 의한 결함의 탐지에 관한 연구 = A study on the fault identification with dynamic characteristics measurements of a thin shell structurelink 이인찬; Lee, In-Chan; et al, 한국과학기술원, 1988 |
2709 | 얇은 판에 수직으로 입사되는 자유 낙하 물방울에 의한 음향 방사 = Sound radiation from a thin plate by a normally impinging water drop in a free falllink 제병수; Je, Byoung-Soo; et al, 한국과학기술원, 2009 |
2710 | 얇은 환상 제트 및 동축 제트에 미치는 코안다 효과에 대한 실험적 고찰 = An experimental investigation of coanda effect on the annular jet and the coaxial jetlink 방세윤; Bang, Se-Yoon; et al, 한국과학기술원, 1983 |