Showing results 16 to 32 of 32
Markov-Based Maintenance Planning Considering Repair Time and Periodic Inspection Lee, Seungchul; Li, Lin; Ni, Jun, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.135, no.3, 2013-06 |
Mechanical aspects of degree of cement bonding and implant wedge effect Yoon, Yong-San; Oxland, Thomas R.; Hodgson, Antony J.; Duncan, Clive P.; Masri, Bassam A.; Choi, Donok, CLINICAL BIOMECHANICS, v.23, no.9, pp.1141 - 1147, 2008-11 |
Mesh coarsening using the phantom-node method in the phase field model Kim, Gihwan; Lee, Phill-Seung, FINITE ELEMENTS IN ANALYSIS AND DESIGN, v.228, 2024-01 |
Mode II interlaminar fracture behavior of carbon bead-filled epoxy/glass fiber hybrid composite Lee, Jungju; Lim, JO; Huh, JS, POLYMER COMPOSITES, v.21, no.2, pp.343 - 352, 2000-04 |
Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality Lou, Yanshan; Yoon, Jeong Whan; Huh, Hoon, INTERNATIONAL JOURNAL OF PLASTICITY, v.54, pp.56 - 80, 2014-03 |
Nanoindentation cannot accurately predict the tensile strength of graphene or other 2D materials Han, Jihoon; Pugno, Nicola M.; Ryu, Seunghwa, NANOSCALE, v.7, no.38, pp.15672 - 15679, 2015-08 |
Numerical analysis of the damage behavior of an aluminum/CFRP hybrid beam under three point bending Shin, Dong Kil; Kim, Hee Chul; Lee, Jungju, COMPOSITES PART B-ENGINEERING, v.56, pp.397 - 407, 2014-01 |
Optimal design of composite stiffened panel with cohesive elements using micro-genetic algorithm Kim, Soohyun; Kim, Chun-Gon, JOURNAL OF COMPOSITE MATERIALS, v.42, no.21, pp.2259 - 2273, 2008-11 |
Optimum bolted joints for hybrid composite materials Oh, JH; Kim, YG; Lee, Dai Gil, COMPOSITE STRUCTURES, v.38, no.1-4, pp.329 - 341, 1997-05 |
Performance improvement by glass fiber of adhesively bonded metal joints at the cryogenic temperature Bang, Chang-Seon; Kim, Jin-Gyu; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.96, pp.321 - 331, 2013-02 |
Post optimization for accurate and efficient reliability-based design optimization using second-order reliability method based on importance sampling and its stochastic sensitivity analysis Lim, Jongmin; Lee, Byungchai; Lee, IkJin, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.107, no.2, pp.93 - 108, 2016-07 |
Rate-dependent hardening model for polymer-bonded explosives with an HTPB polymer matrix considering a wide range of strain rates Park, Chung-Hee; Huh, Hoon; Park, Jungsu, JOURNAL OF COMPOSITE MATERIALS, v.49, no.4, pp.425 - 438, 2015-02 |
Residual stress analysis of the thermal barrier coating system by considering the plasma spraying process Lee, Myung Jae; Lee, Byung Chai; Lim, Jang-Gyun; Kim, Moon-Ki, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.28, no.6, pp.2161 - 2168, 2014-06 |
Sampling-based weighted reliability-based design optimization Lee, Ungki; Lee, Ikjin, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.65, no.1, 2022-01 |
Self-Heating-Induced Deterioration of Electromechanical Performance in Polymer-Supported Metal Films for Flexible Electronics Jang, Dong-Won; Lee, Jeong-Hwan; Kim, Ansoon; Lee, Soon-Bok; Hong, Seong-Gu, SCIENTIFIC REPORTS, v.7, 2017-10 |
The effect of shrink fitting ratios on tool life in bolt forming processes Lee, Hyun Chul; Saroosh, MA; Song, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.209, no.8, pp.3766 - 3775, 2009-04 |
Tool life prediction for the bolt forming process based on high-cycle fatigue and wear Lee, HC; Lee, Y; Lee, SY; Choi, S; Lee, DL; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.201, no.1-3, pp.348 - 353, 2008-05 |
Discover