| 1 | Characterization of Spastic Ankle Flexors Based on Viscoelastic Modeling for Accurate Diagnosis Shin, Won-Seok; Chang, Handdeut; Kim, Sangjoon J.; Kim, Jung, INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, v.18, no.1, pp.102 - 113, 2020-01 |
| 2 | Design and optimization of voice coil motor for application in active vibration isolation Banik, Rahul; Gweon, Dae-Gab, SENSORS AND ACTUATORS A-PHYSICAL, v.137, no.2, pp.236 - 243, 2007-07 |
| 3 | Design methods for six-degree-of-freedom displacement measurement systems using cooperative targets Kim, Jong-Ahn; Bae, Eui Won; Kim, Soohyun; Kwak, Yoon Keun, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, v.26, no.1, pp.99 - 104, 2002-01 |
| 4 | Design of a hybrid composite strut tower for use in automobiles Lee, Hyun Chul; Jung, Yong Sik; Oh, Hyun Ju; Kim, Seong Su, ADVANCED COMPOSITE MATERIALS, v.23, no.3, pp.275 - 291, 2014-05 |
| 5 | Design of processes and products through simulation of three-dimensional extrusion Yang, Dong-Yol; Kim, KJ, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.191, no.1-3, pp.2 - 6, 2007-08 |
| 6 | Design optimization of extruded preform for hydroforming processes based on ideal forming design theory Yoon, Jeong Whan; Chung, Kwansoo; Pourboghrat, Farhang; Barlat, Frederic, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.48, no.12, pp.1416 - 1428, 2006-12 |
| 7 | Forced convection in microstructures for electronic equipment cooling Kim, SungJin; Kim, D, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, v.121, no.3, pp.639 - 645, 1999-08 |
| 8 | Generation of robotic assembly sequences with consideration of line balancing using simulated annealing Hong, DS; Cho, Hyungsuck, ROBOTICA, v.15, pp.663 - 673, 1997 |
| 9 | Manufacturing of composite sandwich robot structures using the co-cure bonding method Lee, CS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.65, no.3-4, pp.307 - 318, 2004-09 |
| 10 | Model-based optimal hand posture recognition using KINECT sensor = KINECT 센서를 이용한 모델기반 최적 손 자세 인식에 관한 연구link Jo, Seung-Hyeon; 조승현; Kim, Soo-Hyun; 김수현; et al, 한국과학기술원, 2013 |
| 11 | Optimal design of composite stiffened panel with cohesive elements using micro-genetic algorithm Kim, Soohyun; Kim, Chun-Gon, JOURNAL OF COMPOSITE MATERIALS, v.42, no.21, pp.2259 - 2273, 2008-11 |
| 12 | Optimal synthesis of a spring-actuated cam mechanism using a cubic spline Kim, JH; Ahn, KY; Kim, Soohyun, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, v.216, no.9, pp.875 - 883, 2002 |
| 13 | Optimization of a microchannel heat sink using three-dimensional analysis = 3차원 수치 해석을 통한 마이크로채널 히트싱크의 최적화link Ryu, Je-Hyoung; 류제형; et al, 한국과학기술원, 2002 |
| 14 | Optimization of acoustic blackhole structure for the reduction of plate vibration = 판의 진동에너지 저감을 위한 음향블랙홀 구조의 최적화link Kim, Mi-Seong; 김미성; Ih, Jeong-Guon; 이정권; et al, 한국과학기술원, 2016 |
| 15 | Optimization of finite element grids using shape sensitivity analysis in terms of nodal positions Kang, KT; Kwak, Byung Man, FINITE ELEMENTS IN ANALYSIS AND DESIGN, v.26, no.1, pp.1 - 19, 1997-05 |
| 16 | Optimization of the 4 Links of an 8 DOF Haptic Master Device for a Surgical Robot = 수술용 로봇을 위한 8자유도 햅틱 마스터 장치에서 4개 링크의 최적화link Iqbal, Hashim; Iqbal H.; et al, 한국과학기술원, 2011 |
| 17 | Stress-based springback reduction of a channel shaped auto-body part with high-strength steel using response surface methodology Song, Jung-Han; Huh, Hoon; Kim, Se-Ho, JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, v.129, no.3, pp.397 - 406, 2007-07 |
| 18 | Structural dynamics modification via reorientation of modification elements Jung, E; Park, Youn-sik; Park, KC, FINITE ELEMENTS IN ANALYSIS AND DESIGN, v.42, no.1, pp.50 - 70, 2005-10 |
| 19 | 고관절 전치환 수술용 의료로봇의 개발 = Development of surgical robot for total hip arthroplastylink 정종하; Chung, Jong-Ha; et al, 한국과학기술원, 2001 |
| 20 | 공명기 배열을 이용한 저주파 소음저감용 소음기의 설계 = Low frequency silencer design by using array resonatorslink 서상현; Seo, Sang-Hyun; et al, 한국과학기술원, 2004 |
| 21 | 마디선의 최적화와 바이올린 상판에의 적용 = Nodal line optimization and application to violin top platelink 김인겸; Kim In-Kyum; et al, 한국과학기술원, 2008 |
| 22 | 반응표면법을 이용한 차체 부재의 충돌성능 향상을 위한 설계 최적화 = Design optimization of auto-body members for crashworthiness enhancement with the response surface methodlink 나승렬; Na, Seung-Ryul; et al, 한국과학기술원, 2004 |
| 23 | 보이스 코일 구동기의 원리를 이용한 새로운 스피리컬 모터의 설계와 제어에 관한 연구 = Design and control of a new spherical motor using principle of voice coil actuatorlink 김현창; Kim, Hyun-Chang; et al, 한국과학기술원, 2013 |
| 24 | 성능함수 지수와 확률조건을 고려한 효율적인 강건 최적설계 기법의 개발 = An efficient technique for robust optimization considering performance index and probability constraintslink 정도현; Jung, Do-Hyun; et al, 한국과학기술원, 2001 |
| 25 | 인코넬 718의 고온 불림 성형성 확보를 위한 최적 블랭크 설계 연구 = A study on blank optimization for blow forming of inconel 718 to secure formability at high temperaturelink 유준태; Yoo, Joon-Tae; et al, 한국과학기술원, 2013 |
| 26 | 저주파수 배기소음 저감을 위한 차량 배기계의 최적화 = Optimization of the car exhaust system for the reduction of the low-frequency discharge noiselink 최충영; Choi, Choong-Young; et al, 한국과학기술원, 2009 |
| 27 | 저항 점용접의 공정 해석에 의한 용접부의 잔류응력과 변형에 대한 연구 = A study on residual stress and deformation of resistance spot welded structure using process analysislink 차병우; Cha, Byoung-Woo; 나석주; 송지호; et al, 한국과학기술원, 2002 |
| 28 | 피라미드형 3차원 금속 소재의 설계 및 적외선 브레이징을 이용한 공정개발 = Design and development of a metallic material with pyramidal regular structures using infrared brazinglink 이세희; Lee, Se-Hee; et al, 한국과학기술원, 2010 |
