Showing results 410 to 469 of 655
Nano-Stereolithography Process for Fabrication of Three dimensional Nano/Micro-Devices/Objets Yang, Dong-Yol; Park, SH; Lim, TW, ASPEN, pp.567 - 567, 2005 |
Nano-stereolithography process for precise and effective 2D and 3D nano/microfabrication Park, SH; Lim, TW; Yang, Dong-Yol, NANJING HANGKONG HANGTIAN DAXUE XUEBAO/JOURNAL OF NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS, v.4, no.3, pp.199 - 207, 2006-09 |
Nanoscale Electronics: Digital Fabrication by Direct Femtosecond Laser Processing of Metal Nanoparticles Son, Yong; Yeo, Jun-Yeob; Moon, Han-Ul; Lim, Tae-Woo; Hong, Suk-Joon; Nam, Koo-Hyun; Yoo, Seung-Hyup; et al, ADVANCED MATERIALS, v.23, no.28, pp.3176 - 3176, 2011-07 |
Net shape manufacturing of three-dimensional SiCN ceramic microstructures using an isotropic shrinkage method by introducing shrinkage guiders Lim, Tae-Woo; Son, Yong; Yang, Dong-Yol; Pham, Tuan Anh; Kim, Dong-Pyo; Yang, Byeong-Il; Lee, Kwang-Sup; et al, INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, v.5, no.3, pp.258 - 264, 2008 |
NEW FORMULATION OF GENERALIZED VELOCITY FIELD FOR AXISYMMETRIC FORWARD EXTRUSION THROUGH ARBITRARILY CURVED DIES. Yang, Dong-Yol; Han, CH, JOURNAL OF ENGINEERING FOR INDUSTRY, v.109, no.2, pp.161 - 168, 1987-05 |
Non - steady state upper - bound analsiys of non - axisymmetic backward extrusion = 비정상상태의 비대칭 후방압출 해석link Bae, Won-Byong; 배원병; et al, 한국과학기술원, 1992 |
Non-uniform fracture in three-stage forming process of sheared protrusion for current collector of molten carbonate fuel cells Lee, Chang Whan; Yang, Dong-Yol, 11th International Conference on Technology of Plasticity, ICTP 2014, pp.1151 - 1156, Elsevier Ltd, 2014-10 |
Novel Fabrication Method of Barrier-Ribs for PDP by UV-Assisted Roll Embossing Process S. M. Ryu,; Kim, D.J; Yang, Dong-Yol; Park, L. S, The 14th International display workshops, pp.819 - 822, 2007 |
Numerical analysis of three-dimensional extrusion of arbitrarily shaped sections by the method of weighted residuals Lee, CM; Yang, Dong-Yol; Kim, MU, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.32, no.1, pp.65 - 82, 1990 |
Numerical analysis of three-dimensional extrusion of elliptic sections by the method of weighted residuals Lee, CM; Yang, Dong-Yol; Lange, K, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.31, no.5, pp.379 - 393, 1989 |
Numerical analysis of three-dimensional extrusionof sections through curved dies by the method of weighted residuals = 곡면금형을 통한 3차원 압출의 가중잔류항법에 의한 수치해석link Lee, Choon-Man; 이춘만; et al, 한국과학기술원, 1989 |
Numerical and experimental investigation into cold incremental rolling of doubly curved plates for process design of a new LARS (line array roll set) rolling process Shim, D. S.; Yang, Dong-Yol; Kim, K. H.; Han, M. S.; Chung, S. W., CIRP ANNALS-MANUFACTURING TECHNOLOGY, v.58, no.1, pp.239 - 242, 2009 |
Numerical modeling and analysis for forming process of dual-phase 980 steel exposed to infrared local heating Lee, Eun Ho; Yang, Dong-Yol; Yoon, Jeong Whan; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.75-76, pp.211 - 224, 2015-12 |
Numerical modeling and experimental validation of focused surface heating using near-infrared rays with an elliptical reflector Lee, Eun Ho; Yang, Dong-Yol; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.78, pp.240 - 250, 2014-11 |
Numerical modeling of the multi-stage sheet pair hydroforming process Kim, TJ; Yang, Dong-Yol; Han, SS, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.151, no.1-3, pp.48 - 53, 2004-09 |
Numerical modelling and design optimization of complicated industrial extrusion processes Yang, Dong-Yol; Kim, K.J., NUMIFORM, pp.0 - 0, 2004 |
Numerical simulation of filling stage in the die casting process using finite element method = 유한요소법을 이용한 다이캐스팅 공정에 있어 충전과정의 수치적 모사link Jeong, Jun-Ho; 정준호; et al, 한국과학기술원, 1998 |
Numerical simulation of multi-blow forging processes using the explicit time integration finite element method Yoo, YH; Yang, Dong-Yol; Chung, DT, ENGINEERING COMPUTATIONS, v.14, no.8, pp.901 - 901, 1997-04 |
Numerical Simulation of Sheet Metal Forming Processes by Adative section refinement Yang, Dong-Yol; Song, I.S.; Yoo, D.J., PROC. IDDRG '94, v.0, no.0, pp.329 - 338, 1994 |
ON THE EQUIVALENT FRICTION FACTOR IN HYDROFILM EXTRUSION Yang, Dong-Yol; LANGE, K, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.25, no.4, pp.277 - 281, 1983 |
Optimal Design at Inner Core of the shaped pyramidal truss structure Lee, Sung-Uk; Yang, Dong-Yol, NUMISHEET (International Conference and Workshop on Numerical Simulation of 3D sheet Metal Forming Processes), NUMISHEET (International Conference and Workshop on Numerical Simulation of 3D sheet Metal Forming Processes), 2014-01 |
Optimal perform design by tracing the material flow : Application to piston forging Yang, Dong-Yol, ASPF, v.0, no.0, pp.143 - 146, ASPF, 2003-05-01 |
Optimization of forming steps in the incremental forming of twisted shapes using a line array roll set (LARS) Shim, DS; Yang, Dong-Yol; Chung, SW; Han, MS, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.11, no.5, pp.715 - 723, 2010-10 |
Optimization of the preform shape in the three-stage forming process of the shielded slot plate in fuel cell manufacturing Lee, Chang-Whan; Yang, Dong-Yol; Kang, Dong-Woo; Chang, In-Gab; Lee, Tae- Won, NUMIFORM 2013, NUMIFORM 2013, 2013-07 |
Optimization of the shape of a lip die in extrusion of a plate wider than the diameter of a round billet using a lip die Yang, Dong-Yol, NUMIFORM, pp.2091 - 2096, 2004-06-01 |
Optimum blank design in sheet metal forming by the deformation path iteration method Park, SH; Yoon, Jeong Whan; Yang, Dong-Yol; Kim, YH, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.41, no.10, pp.1217 - 1232, 1999-10 |
Pattern Formation of Silver Nanoparticles in 1-, 2-, and 3D Microstructures Fabricated by a Photo- and Thermal Reduction Method Park, Jong-Jin; Bulliard, Xavier; Lee, Ji Min; Hur, Jaehyun; Im, Kyuhyun; Kim, Jong-Min; Prabhakaran, Prem; et al, ADVANCED FUNCTIONAL MATERIALS, v.20, no.14, pp.2296 - 2302, 2010-07 |
Patterning of Ag Electrode by X-Ray Lithographic Process for ITO-less Plasma Display Panel Ryu, SM; Yang, Dong-Yol; Jae-Yong So; Park, LS, the 13th Japan-Korea International Symposium on Advanced Display Materials and Devices, 2009-07 |
Photopatternable Quantum Dots Forming Quasi-Ordered Arrays Park, Jong-Jin; Prabhakaran, Prem; Jang, Kyung Kook; Lee, YoungGu; Lee, Junho; Lee, KwangHee; Hur, Jaehyun; et al, NANO LETTERS, v.10, no.7, pp.2310 - 2317, 2010-07 |
Photosensitive Functionalized Surface-Modified Quantum Dots for Polymeric Structures via Two-Photon-Initiated Polymerization Technique Kirni, Redounane; Ha, Cheol-Woo; Prabhakaran, Prem; ElMard, Hicham; Yang, Dong-Yol; Zentel, Rudolf; Lee, Kwang-Sup, MACROMOLECULAR RAPID COMMUNICATIONS, v.36, no.11, pp.1108 - 1114, 2015-06 |
Physical modeling of incremental open-die disk forging Lee, S. U; Yang, Dong-Yol; Kim, K. J.; Cho, J. R., Proceedings of the 9th international conference on technology of plasticity, 2009-09-11 |
Plane-strain problems to 3-D problems Yang, Dong-Yol, Proceedings of the 7th International Conference on Technology of Plasticity, 2002 |
Plane-strain stretch forming using selective membrane/shell formulation Song In-Seob; Yang, Dong-Yol; Jung Sang-Bo, the 6th International Pacific Conference on Automotive Engingeering, pp.1313 - 1318, 1991-10-28 |
Plaster casting process for prototyping of die casting based on rapid tooling Kim, KD; Yang, Dong-Yol; Jeong, JH, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.28, pp.923 - 929, 2006-04 |
Practical design equations for cold roll forming of doubly curved hull plates using line array roll set Shim, DS; Yang, Dong-Yol; Kim, KH; Chung, SW; Han, MS, JOURNAL OF SHIP PRODUCTION, v.26, no.3, pp.177 - 186, 2010-08 |
Precise Fabrication Methods for Diverse Materials Using two photon Stereolithography Yang, Dong-Yol; Lim, Tae-Woo; Son, Yong; Lee, Kwang-sup; Kim, Dong-Pyo; Park, Sang-hu, The 6th International Symposium on Nanomanufacturing, 2008 |
Precision forging design and analysis in electronics part manufacturing Park, K; Yang, Dong-Yol; Kang, YS, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.213, no.1, pp.11 - 20, 1999 |
Prediction of deformation-induced anisotropy in profile extrusion of aluminum alloys = 알루미늄 압출공정에서의 변형 이방성 예측에 대한 연구link Lee, Chang-Hui; 이창희; et al, 한국과학기술원, 2002 |
Prediction of fiber orientation in injection molded parts considering compressibility and phase change Lee S.C.; Yang, Dong-Yol; Youn J.R., Proceedings of the 1997 55th Annual Technical Conference, ANTEC. Part 3 (of 3), v.1, pp.642 - 648, 1997-04-27 |
Prediction of Texture Evolution and Material Properties in Plastically Deformed FCC Polycrystalline Metals based on Rate-Independent Crystal Plasticit K. J. Kim; J. W. Yoon; Yang, Dong-Yol, Paper presented at the 12th International Symposium on Plasticity and its Current Applications , 2006-07-17 |
Prediction of wrinkling initiation in sheet metal forming processes Kim, JB; Yang, Dong-Yol, ENGINEERING COMPUTATIONS, v.20, no.1-2, pp.6 - 39, 2003 |
Process Design of Defect-free Cogging for Large rotor forgings Yang, Dong-Yol; Yang, C. Y.; Ko, J.; Yoon, J. R., Forge Master Conf, 1997 |
Process development and simulation for cold fabrication of doubly curved metal plate by using line array roll set Shim D.S.; Jung C.G.; Seong D.Y.; Yang, Dong-Yol; Han J.M.; Han M.S., MATERIALS PROCESSING AND DESIGN; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes, pp.865 - 870, 123, 2007-06-17 |
Process modification of bevel gear forging using three-dimensional finite element analysis Lee Y.K; Lee S.R; Lee C.H; Yang, Dong-Yol, 5th Asia Pacific Conference on Materials Processing, v.113, no.40546, pp.59 - 63, Elsevier, 2001-06-25 |
Production of Doubly Curved Ship Hull Plate by Incremental Roll Forming Process Chung, S. W.; Shim,D. S; Yang, Dong-Yol; Han, M. S.; Han, J. M.; Son, Y. S., Proceedings of Spring Meeting of Japan Society for Technology of Plasticity, v.Chiba, pp.259 - 260, 2008-05 |
Proportional enlargement of movement by using an optically driven multi-link system with an elastic joint![]() Jeong, Yu-Jin; Lim, Tae-Woo; Son, Yong; Yang, Dong-Yol; Kong, Hong-Jin; Lee, Kwang-Sup, OPTICS EXPRESS, v.18, no.13, pp.13745 - 13753, 2010-06 |
Pulse-width dependency of the fabricating resolution of the two-photon absorption photo-polymerization Kong H.J.; Yi S.W.; Yang, Dong-Yol; Lee K.-S.; Kim J.-B.; Lim T.-W.; Kim S., Micromachining Technology for Micro-Optics and Nano-Optics V and Microfabrication Process Technology XII, 2007-01-22 |
Quantitatively Controlled Fabrication of Uniaxially Aligned Nanofibrous Scaffold for Cell Adhesion![]() Park, Suk Hee; Hong, Jung Woo; Shin, Jennifer Hyunjong; Yang, Dong-Yol, JOURNAL OF NANOMATERIALS, 2011-03 |
Quasi-isotropic bending responses of metallic sandwich plates with bi-directionally corrugated cores Seong, D. Y.; Jung, C. G.; Yang, Dong-Yol; Moon, K. J.; Ahn, D. G., MATERIALS DESIGN, v.31, no.6, pp.2804 - 2812, 2010-06 |
Rapid Fabrication of Large-sized Solid Shape using Variable Lamination Manufacturing and Multi-functional Hotwire Cutting System Yang, Dong-Yol; Kim, H.C.; Lee,S.H.; Ahn, D.G.; Park, S.K., The Sixteenth Solid Freeform Fabrication Symposium 2005, pp.60 - 71, 2005 |
Rapid Manufacturing of Microscale Thin-walled Structures using a Phase Change Work-holding Method Shin, Bo-Sung; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.7, no.3, pp.47 - 50, 2006-07 |
Rapid prototyping and reverse engineering application for orthopedic surgery planning Ahn, DG; Lee, JY; Yang, Dong-Yol, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.20, pp.19 - 28, 2006-01 |
Rational Finite Element Formulation for a Membrane Element in Sheet Metal Forming Analysis Huh, H; Han,S. S.; Yang, Dong-Yol, 4th ICTP , Advanced Technology of Plasticity, v.3, no.0, pp.1529 - 1534, ICTP, 1993-09-05 |
Realizing metal and quantum dot containing patterns by two-photon lithography Prabhakaran, Prem; Lee, Kwang-Sup; Jang, Kyung Kook; Yang, Dong-Yol; Son,Yong, SPIE, SPIE, 2011-08-21 |
Recent developments in the use of two-photon polymerization in precise 2D and 3D microfabrications Lee, KS; Yang, Dong-Yol; Park, SH; Kim, RH, POLYMERS FOR ADVANCED TECHNOLOGIES, v.17, pp.72 - 82, 2006-02 |
Recent progress of lithographic micro fabrication by the TPA-induced photopolymerization Yang, HK; Kim, MS; Kang, SW; Kim, KS; Lee, KS; Park, SH; Yang, Dong-Yol; et al, JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, v.17, no.3, pp.385 - 392, 2004 |
Recent trends in numerical simulation of three-dimensional sheet forming processes Yang, Dong-Yol; Kim, TJ; Yoon, SJ, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.217, no.11, pp.1553 - 1570, 2003 |
RIGID PLASTIC FINITE-ELEMENT ANALYSIS OF HYDROSTATIC BULGING OF ELLIPTIC DIAPHRAGMS USING HILL NEW YIELD CRITERION CHUNG, WJ; KIM, YJ; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.31, no.3, pp.193 - 206, 1989 |
RIGID PLASTIC FINITE-ELEMENT ANALYSIS OF PLANE-STRAIN RING ROLLING Yang, Dong-Yol; KIM, KH, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.30, no.8, pp.571 - 580, 1988 |
RIGID PLASTIC FINITE-ELEMENT ANALYSIS OF SHEET-METAL FORMING PROCESSES WITH INITIAL GUESS GENERATION Yang, Dong-Yol; CHUNG, WJ; SHIM, HB, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.32, no.8, pp.687 - 708, 1990 |
Discover