Browse "Dept. of Mechanical Engineering(기계공학과)" by Author Yang, Dong-Yol
Showing results 391 to 450 of 655
| Material design for the fabrication of barrier ribs with high aspect ratio of plasma display panel by x-ray lithography Ryu S.-M.; Yang, Dong-Yol; So J.-Y.; Park L.S., 8th International Meeting on Information Display - International Display Manufacturing Conference 2008 and Asia Display 2008, IMID/IDMC/ASIA DISPLAY 2008, pp.989 - 992, 2008-10-13 |
| Mechanical properties and anisotropy of expanded polystyrene foam sheet for the VLM-S rapid prototyping process Ahn, DG; Lee, SH; Yang, Dong-Yol, JOURNAL OF MATERIALS SCIENCE LETTERS, v.21, no.9, pp.747 - 749, 2002-05 |
| Mechanical properties and failure characteristics of ISB panel with metalllic pyramidal inner structures Ahn, D. G.; Lee, S. H.; Jung, C. G.; Hahn, G. Y.; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.187, pp.521 - 525, 2007-06 |
| Mechanical properties and microstructure of AA1050 after ECAE (Equal Channel Angular Extrusion) Kim, K.J.; Yang, Dong-Yol; Yoon, Jeong Whan, AIP Conference Proceedings, v.1252, pp.981 - 986, 2010 |
| Mechanical properties and microstructure of AA1050 after ECAE (Equal channel angular extrusion) Kim K.J.; Yang, Dong-Yol; Yoon J.W., NUMIFORM 2010, pp.981 - 986, AIP, 2010-06-13 |
| Mesh generation and adaptive refinement of all-hexahedral elements for three-dimensional finite element analysis = 3차원 유한요소 해석을 위한 육면체 요소의 격자 생성 및 세분화에 관한 연구link Park, Chul-Hyun; 박철현; et al, 한국과학기술원, 2005 |
| Method of Weighted Residuals 를 이용한 곡면 금형의 축 대칭 전방 압출 = Analysis of axisymmetric extrusion through curved dies by using the method of weighted residualslink 조종래; Cho, Jong-Rae; et al, 한국과학기술원, 1984 |
| Micro fabrication of bio-applicable structures via polymer melt extrusion method Yang, Dong-Yol; Park, Suk-Hee, Proceedings of the 9th international conference on technology of plasticity, 2009-09-11 |
| Micro-Manufacturing Process Preface Altintas, Y.; Chua, C. K.; Vollertsen, F.; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.212, no.3, pp.541 - 541, 2012-03 |
| Microfabrication of Pure Metallic Microstructures from Aqueous Polyelectrolytes and Block Copolymers Prabhakaran, Prem; Lee, Kwang-Sup; Borg, Lisa zur; Son, Yong; Zentel, Rudolf; Yang, Dong-Yol, US-KOREA JSNT 2011, US-KOREA JSNT, 2011-06-01 |
| Microstructural evolution and its effect on mechanical properties of commercially pure aluminum deformed by ECAE (Equal Channel Angular Extrusion) via routes A and C Kim, K. J.; Yang, Dong-Yol; Yoon, Jeong Whan, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.527, no.29-30, pp.7927 - 7930, 2010-11 |
| Microstructured scaffold coated with hydroxyapatite/collagen nanocomposite multilayer for enhanced osteogenic induction of human mesenchymal stem cells Kim, Taek Gyoung; Park, Suk-Hee; Chung, Hyun Jung; Yang, Dong-Yol; Park, Tae Gwan, JOURNAL OF MATERIALS CHEMISTRY, v.20, no.40, pp.8927 - 8933, 2010-10 |
| Mismatching refinement with domain decomposition for the analysis of steady-stale metal forming process Park, K; Yang, Dong-Yol, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.48, no.7, pp.1089 - 1106, 2000-07 |
| Modeling of Void Crushing for Large-Ingot Hot Forging Park, C.Y.; Yang, Dong-Yol, Int. Conf. on MSME '95, 1995 |
| Modelling of Void Crushing for Large-Ingot Hot Forging Yang, Dong-Yol; Park, C. Y., Int. Conf. MSME '95, v.5, no.7, 0, 1995 |
| Modelling of void crushing for large-ingot hot forging Park, CY; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.67, no.1-3, pp.195 - 200, 1997 |
| MODIFIED MEMBRANE FINITE-ELEMENT FORMULATION CONSIDERING BENDING EFFECTS IN SHEET-METAL FORMING ANALYSIS Huh, Hoon; HAN, SS; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.36, no.7, pp.659 - 671, 1994-07 |
| Modular remeshing : Apractical method of 3-D remeshing in forging of complicated parts Yang, Dong-Yol; Yoo, H.; Lee, N.K., Proc. 3rd ICPT, v.1, pp.171 - 178, 1990 |
| Multi-Stage Forming using Optimized Preform in the Line Array Roll Set Process and Its Industrial Application Shim, Do-Sik; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.15, no.10, pp.2085 - 2092, 2014-10 |
| Nano-Stereolithography Process for Fabrication of Three dimensional Nano/Micro-Devices/Objets Yang, Dong-Yol; Park, SH; Lim, TW, ASPEN, pp.567 - 567, 2005 |
| Nano-stereolithography process for precise and effective 2D and 3D nano/microfabrication Park, SH; Lim, TW; Yang, Dong-Yol, NANJING HANGKONG HANGTIAN DAXUE XUEBAO/JOURNAL OF NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS, v.4, no.3, pp.199 - 207, 2006-09 |
| Nanoscale Electronics: Digital Fabrication by Direct Femtosecond Laser Processing of Metal Nanoparticles Son, Yong; Yeo, Jun-Yeob; Moon, Han-Ul; Lim, Tae-Woo; Hong, Suk-Joon; Nam, Koo-Hyun; Yoo, Seung-Hyup; et al, ADVANCED MATERIALS, v.23, no.28, pp.3176 - 3176, 2011-07 |
| Net shape manufacturing of three-dimensional SiCN ceramic microstructures using an isotropic shrinkage method by introducing shrinkage guiders Lim, Tae-Woo; Son, Yong; Yang, Dong-Yol; Pham, Tuan Anh; Kim, Dong-Pyo; Yang, Byeong-Il; Lee, Kwang-Sup; et al, INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, v.5, no.3, pp.258 - 264, 2008 |
| NEW FORMULATION OF GENERALIZED VELOCITY FIELD FOR AXISYMMETRIC FORWARD EXTRUSION THROUGH ARBITRARILY CURVED DIES. Yang, Dong-Yol; Han, CH, JOURNAL OF ENGINEERING FOR INDUSTRY, v.109, no.2, pp.161 - 168, 1987-05 |
| Non - steady state upper - bound analsiys of non - axisymmetic backward extrusion = 비정상상태의 비대칭 후방압출 해석link Bae, Won-Byong; 배원병; et al, 한국과학기술원, 1992 |
| Non-uniform fracture in three-stage forming process of sheared protrusion for current collector of molten carbonate fuel cells Lee, Chang Whan; Yang, Dong-Yol, 11th International Conference on Technology of Plasticity, ICTP 2014, pp.1151 - 1156, Elsevier Ltd, 2014-10 |
| Novel Fabrication Method of Barrier-Ribs for PDP by UV-Assisted Roll Embossing Process S. M. Ryu,; Kim, D.J; Yang, Dong-Yol; Park, L. S, The 14th International display workshops, pp.819 - 822, 2007 |
| Numerical analysis of three-dimensional extrusion of arbitrarily shaped sections by the method of weighted residuals Lee, CM; Yang, Dong-Yol; Kim, MU, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.32, no.1, pp.65 - 82, 1990 |
| Numerical analysis of three-dimensional extrusion of elliptic sections by the method of weighted residuals Lee, CM; Yang, Dong-Yol; Lange, K, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.31, no.5, pp.379 - 393, 1989 |
| Numerical analysis of three-dimensional extrusionof sections through curved dies by the method of weighted residuals = 곡면금형을 통한 3차원 압출의 가중잔류항법에 의한 수치해석link Lee, Choon-Man; 이춘만; et al, 한국과학기술원, 1989 |
| Numerical and experimental investigation into cold incremental rolling of doubly curved plates for process design of a new LARS (line array roll set) rolling process Shim, D. S.; Yang, Dong-Yol; Kim, K. H.; Han, M. S.; Chung, S. W., CIRP ANNALS-MANUFACTURING TECHNOLOGY, v.58, no.1, pp.239 - 242, 2009 |
| Numerical modeling and analysis for forming process of dual-phase 980 steel exposed to infrared local heating Lee, Eun Ho; Yang, Dong-Yol; Yoon, Jeong Whan; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.75-76, pp.211 - 224, 2015-12 |
| Numerical modeling and experimental validation of focused surface heating using near-infrared rays with an elliptical reflector Lee, Eun Ho; Yang, Dong-Yol; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.78, pp.240 - 250, 2014-11 |
| Numerical modeling of the multi-stage sheet pair hydroforming process Kim, TJ; Yang, Dong-Yol; Han, SS, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.151, no.1-3, pp.48 - 53, 2004-09 |
| Numerical modelling and design optimization of complicated industrial extrusion processes Yang, Dong-Yol; Kim, K.J., NUMIFORM, pp.0 - 0, 2004 |
| Numerical simulation of filling stage in the die casting process using finite element method = 유한요소법을 이용한 다이캐스팅 공정에 있어 충전과정의 수치적 모사link Jeong, Jun-Ho; 정준호; et al, 한국과학기술원, 1998 |
| Numerical simulation of multi-blow forging processes using the explicit time integration finite element method Yoo, YH; Yang, Dong-Yol; Chung, DT, ENGINEERING COMPUTATIONS, v.14, no.8, pp.901 - 901, 1997-04 |
| Numerical Simulation of Sheet Metal Forming Processes by Adative section refinement Yang, Dong-Yol; Song, I.S.; Yoo, D.J., PROC. IDDRG '94, v.0, no.0, pp.329 - 338, 1994 |
| ON THE EQUIVALENT FRICTION FACTOR IN HYDROFILM EXTRUSION Yang, Dong-Yol; LANGE, K, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.25, no.4, pp.277 - 281, 1983 |
| Optimal Design at Inner Core of the shaped pyramidal truss structure Lee, Sung-Uk; Yang, Dong-Yol, NUMISHEET (International Conference and Workshop on Numerical Simulation of 3D sheet Metal Forming Processes), NUMISHEET (International Conference and Workshop on Numerical Simulation of 3D sheet Metal Forming Processes), 2014-01 |
| Optimal perform design by tracing the material flow : Application to piston forging Yang, Dong-Yol, ASPF, v.0, no.0, pp.143 - 146, ASPF, 2003-05-01 |
| Optimization of forming steps in the incremental forming of twisted shapes using a line array roll set (LARS) Shim, DS; Yang, Dong-Yol; Chung, SW; Han, MS, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.11, no.5, pp.715 - 723, 2010-10 |
| Optimization of the preform shape in the three-stage forming process of the shielded slot plate in fuel cell manufacturing Lee, Chang-Whan; Yang, Dong-Yol; Kang, Dong-Woo; Chang, In-Gab; Lee, Tae- Won, NUMIFORM 2013, NUMIFORM 2013, 2013-07 |
| Optimization of the shape of a lip die in extrusion of a plate wider than the diameter of a round billet using a lip die Yang, Dong-Yol, NUMIFORM, pp.2091 - 2096, 2004-06-01 |
| Optimum blank design in sheet metal forming by the deformation path iteration method Park, SH; Yoon, Jeong Whan; Yang, Dong-Yol; Kim, YH, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.41, no.10, pp.1217 - 1232, 1999-10 |
| Pattern Formation of Silver Nanoparticles in 1-, 2-, and 3D Microstructures Fabricated by a Photo- and Thermal Reduction Method Park, Jong-Jin; Bulliard, Xavier; Lee, Ji Min; Hur, Jaehyun; Im, Kyuhyun; Kim, Jong-Min; Prabhakaran, Prem; et al, ADVANCED FUNCTIONAL MATERIALS, v.20, no.14, pp.2296 - 2302, 2010-07 |
| Patterning of Ag Electrode by X-Ray Lithographic Process for ITO-less Plasma Display Panel Ryu, SM; Yang, Dong-Yol; Jae-Yong So; Park, LS, the 13th Japan-Korea International Symposium on Advanced Display Materials and Devices, 2009-07 |
| Photopatternable Quantum Dots Forming Quasi-Ordered Arrays Park, Jong-Jin; Prabhakaran, Prem; Jang, Kyung Kook; Lee, YoungGu; Lee, Junho; Lee, KwangHee; Hur, Jaehyun; et al, NANO LETTERS, v.10, no.7, pp.2310 - 2317, 2010-07 |
| Photosensitive Functionalized Surface-Modified Quantum Dots for Polymeric Structures via Two-Photon-Initiated Polymerization Technique Kirni, Redounane; Ha, Cheol-Woo; Prabhakaran, Prem; ElMard, Hicham; Yang, Dong-Yol; Zentel, Rudolf; Lee, Kwang-Sup, MACROMOLECULAR RAPID COMMUNICATIONS, v.36, no.11, pp.1108 - 1114, 2015-06 |
| Physical modeling of incremental open-die disk forging Lee, S. U; Yang, Dong-Yol; Kim, K. J.; Cho, J. R., Proceedings of the 9th international conference on technology of plasticity, 2009-09-11 |
| Plane-strain problems to 3-D problems Yang, Dong-Yol, Proceedings of the 7th International Conference on Technology of Plasticity, 2002 |
| Plane-strain stretch forming using selective membrane/shell formulation Song In-Seob; Yang, Dong-Yol; Jung Sang-Bo, the 6th International Pacific Conference on Automotive Engingeering, pp.1313 - 1318, 1991-10-28 |
| Plaster casting process for prototyping of die casting based on rapid tooling Kim, KD; Yang, Dong-Yol; Jeong, JH, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.28, pp.923 - 929, 2006-04 |
| Practical design equations for cold roll forming of doubly curved hull plates using line array roll set Shim, DS; Yang, Dong-Yol; Kim, KH; Chung, SW; Han, MS, JOURNAL OF SHIP PRODUCTION, v.26, no.3, pp.177 - 186, 2010-08 |
| Precise Fabrication Methods for Diverse Materials Using two photon Stereolithography Yang, Dong-Yol; Lim, Tae-Woo; Son, Yong; Lee, Kwang-sup; Kim, Dong-Pyo; Park, Sang-hu, The 6th International Symposium on Nanomanufacturing, 2008 |
| Precision forging design and analysis in electronics part manufacturing Park, K; Yang, Dong-Yol; Kang, YS, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.213, no.1, pp.11 - 20, 1999 |
| Prediction of deformation-induced anisotropy in profile extrusion of aluminum alloys = 알루미늄 압출공정에서의 변형 이방성 예측에 대한 연구link Lee, Chang-Hui; 이창희; et al, 한국과학기술원, 2002 |
| Prediction of fiber orientation in injection molded parts considering compressibility and phase change Lee S.C.; Yang, Dong-Yol; Youn J.R., Proceedings of the 1997 55th Annual Technical Conference, ANTEC. Part 3 (of 3), v.1, pp.642 - 648, 1997-04-27 |
| Prediction of Texture Evolution and Material Properties in Plastically Deformed FCC Polycrystalline Metals based on Rate-Independent Crystal Plasticit K. J. Kim; J. W. Yoon; Yang, Dong-Yol, Paper presented at the 12th International Symposium on Plasticity and its Current Applications , 2006-07-17 |
| Prediction of wrinkling initiation in sheet metal forming processes Kim, JB; Yang, Dong-Yol, ENGINEERING COMPUTATIONS, v.20, no.1-2, pp.6 - 39, 2003 |
Discover
Open Access
Date issued
- 4,099 2020 - 2024
- 12,323 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989