Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article

Showing results 8341 to 8400 of 12364

8341
Skeletal kinematics of the midtarsal joint during walking: Midtarsal joint locking revisited

Phan, Cong-Bo; Shin, Geonhui; Lee, Kyoung Min; Koo, Seungbum, JOURNAL OF BIOMECHANICS, v.95, 2019-10

8342
Skin preparation-free, stretchable microneedle adhesive patches for reliable electrophysiological sensing and exoskeleton robot control

Kim, Heesoo; Lee, Juhyun; Heo, Ung; Jayashankar, Dhileep Kumar; Agno, Karen-Christian; Kim, Yeji; Kim, Choongyeon; et al, SCIENCE ADVANCES, v.10, no.3, 2024-01

8343
Skin-attachable and biofriendly chitosan-diatom triboelectric nanogenerator

Kim, Jong-Nam; Lee, Jeehee; Go, Tae Won; Rajabi-Abhari, Araz; Mahato, Manmatha; Park, Jeong Young; Lee, Haeshin; et al, NANO ENERGY, v.75, 2020-09

8344
Skin-interfaced Wearable Biosensors: A Mini-Review

김태환; 박인규, 센서학회지, v.31, no.2, pp.71 - 78, 2022-03

8345
Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain-Pressure Simultaneous Sensor

Kim, Min Seong; Lee, Yung; Ahn, Junseong; Kim, Seonggi; Kang, Kyungnam; Lim, Hyuneui; Bae, Byeong-Soo; et al, ADVANCED FUNCTIONAL MATERIALS, v.33, no.3, 2023-01

8346
Sliding Mechanism of Lateral Thermosonic Process With Anisotropic Conductive Film for High Productivity and High Reliability

Ha, Chang-Wan; Kim, Kyung-Rok; Kim, Kyung-Soo; Kim, Soohyun, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.3, no.2, pp.205 - 212, 2013-02

8347
Sliding Mode Control for Robust Stabilization of Uncertain Input-delay Systems

노영훈; 오준호, TRANSACTION ON CONTROL AUTOMATION AND SYSTEMS ENGINEERING, v.2, no.2, pp.98 - 103, 2000-06

8348
Sliding mode control with perturbation estimation: application to motion control of parallel manipulator

Kim, NI; Lee, Chong-Won; Chang, Pyung-Hun, CONTROL ENGINEERING PRACTICE, v.6, no.11, pp.1321 - 1330, 1998-11

8349
Sliding mode control with uncertainty adaptation for uncertain input-delay systems

Roh, YH; Oh, Jun-Ho, INTERNATIONAL JOURNAL OF CONTROL, v.73, no.13, pp.1255 - 1260, 2000-09

8350
Sliding mode design via quadratic performance optimization with pole-clustering constraint

Kim, Kyung-Soo; Park, Y, SIAM JOURNAL ON CONTROL AND OPTIMIZATION, v.43, no.2, pp.670 - 684, 2004

8351
Sliding-mode-based parameter identification with application to tire pressure and tire-road friction

Lee, D. -J.; Park, Youn-sik, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.12, no.4, pp.571 - 577, 2011-08

8352
SLIP CONTROLLER DESIGN FOR TRACTION CONTROL SYSTEM

Park, Youngjin; Kwak, Byunghak; Jung, Hunsang, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.1, no.1, pp.0 - 0, 2000-09

8353
Slip-line Field for Extrusion through Lipped Die

이종원; 김동원, 대한기계학회저널, v.11, no.4, pp.237 - 246, 1971

8354
Slit 근방의 Stokeslet 에 의한 2 차원의 느린 점성유동

고형종; 김문언, 대한기계학회논문집 A, v.7, no.4, pp.386 - 391, 1983

8355
Slosh-induced piezoelectric energy harvesting in a liquid tank

Kim, Ki Jong; Kim, Junyoung; Kim, Daegyoum, RENEWABLE ENERGY, v.206, pp.409 - 417, 2023-04

8356
Sloshing of a cylindrical tank with pipes under extreme translational excitation

Kim, Ki Jong; Kim, Daegyoum, OCEAN ENGINEERING, v.268, 2023-01

8357
Slow Ratation of a Disk in a Fluid-Filled Circular Cylinder

Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.50, pp.4063 - 4067, 1981

8358
SLOW ROTATION OF AN ANNULAR DISK IN A VISCOUS-FLUID

KIM, MU; Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.54, no.9, pp.3337 - 3341, 1985

8359
Slow scanning electromagnetic scanner for laser display

Jeong, Hee-Moon; Park, Yong-Hwa; Cho, Yong-Chul; Hwang, Junsik; Chang, Seok-Mo; Kang, Seok-Jin; Jeong, Hyun-Ku; et al, JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS, v.7, no.4, 2008-10

8360
Slow Vicous Flow Due to Sliding of a Semi-Infinite Plate Over a Plane

Jae-Tack Jeong; Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.54, no.5, pp.1789 - 1799, 1985-05

8361
SLOW VISCOUS ROTATION OF A SPHERE ON THE AXIS OF A CIRCULAR CONE

Kim, Moon Uhn, PHYSICS OF FLUIDS, v.23, no.6, pp.1268 - 1269, 1980

8362
Slow Viscous Rotation of a Sphere on the Axis of a Circular Cone - Symmetric Case

Moon-Uhn Kim, 한국물리학회지, v.10, no.2, pp.54 - 58, 1977

8363
SLOW VISCOUS-FLOW AROUND A VERTICAL FENCE ON A PLANE

Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.49, no.6, pp.2387 - 2391, 1980

8364
SLOW VISCOUS-FLOW AROUND A VERTICAL PLATE ABOVE A PLANE WALL

JEONG, JT; Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.62, no.12, pp.4243 - 4254, 1993-12

8365
SLOW VISCOUS-FLOW AROUND AN INCLINED FENCE ON A PLANE

JEONG, JT; Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.52, no.7, pp.2356 - 2363, 1983

8366
SLOW VISCOUS-FLOW DUE TO THE MOTION OF A SPHERE ON THE AXIS OF A CIRCULAR CONE

Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.47, no.5, pp.1670 - 1675, 1979

8367
SLOW VISCOUS-FLOW DUE TO THE ROTATION OF 2 FINITE HINGED PLATES

Kim, Moon Uhn; JEONG, JT; LEE, TH, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.55, no.1, pp.115 - 127, 1986-01

8368
SM 45C강의 레이저 표면경화처리에 관한 연구

나석주; 김성도; 이건이; 김태균, 대한기계학회논문집 A, v.11, no.1, pp.53 - 62, 1987-01

8369
Small failure probability: principles, progress and perspectives

Lee, Ikjin; Lee, Ungki; Ramu, Palaniappan; Yadav, Deepanshu; Bayrak, Gamze; Acar, Erdem, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.65, no.11, 2022-11

8370
Small stack performance of intermediate temperature-operating solid oxide fuel cells using stainless steel interconnects and anode-supported single cell

Bae, Joongmyeon; Lim, S; Jee, H; Kim, JH; Yoo, YS; Lee, T, JOURNAL OF POWER SOURCES, v.172, no.1, pp.100 - 107, 2007-10

8371
SMALL STRAIN DEFORMATIONS OF ELASTIC BEAMS AND RODS INCLUDING LARGE DEFLECTIONS

SHIELD, RT; Im, Seyoung, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, v.37, no.4, pp.491 - 513, 1986-07

8372
Smart cure cycle for reducing the thermal residual stress of a co-cured E-glass/carbon/epoxy composite structure for a vanadium redox flow battery

Nam, Soohyun; Lee, Dongyoung; Choi, Ilbeom; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.120, pp.107 - 116, 2015-02

8373
Smart cure cycle with cooling and reheating for co-cure bonded steel/carbon epoxy composite hybrid structures for reducing thermal residual stress

Kim, Hak Sung; Park, Sang Wook; Lee, Dai Gil, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, v.37, no.10, pp.1708 - 1721, 2006

8374
Smart cure cycles for the adhesive joint of composite structures at cryogenic temperatures

Lee, Kwan Ho; Lee, Dai Gil, COMPOSITE STRUCTURES, v.86, no.1-3, pp.37 - 44, 2008-11

8375
Smart Wooden Home Enabled by Direct-Written Laser-Induced Graphene

Nam, Han Ku; Le, Truong-Son Dinh; Yang, Dongwook; Kim, Byunggi; Lee, Younggeun; Hwang, June Sik; Kim, Young-Ryeul; et al, ADVANCED MATERIALS TECHNOLOGIES, v.8, no.9, 2023-05

8376
SmBaCo 2O 5+d and LnBa 0.5Sr 0.5Co 2O 5+δ potential cathode materials for IT-SOFC

Kim, Jeong-Hyeon; Bae, Joongmyeon; Cassidy, Mark; Connor, Paul Alexander; Zhou, Wuzong; Irvine, John Thomas Sirr, ECS Transactions, v.25, no.2 PART 3, pp.2707 - 2715, 2009

8377
SMC 압축성형 공정에 관한 유한요소해석

이충호; 허훈, 소성가공, v.4, no.3, pp.204 - 213, 1995-06

8378
SMC 압축성형 공정의 모델링 및 유한요소법을 이용한 열유동해석

이응식; 윤성기, 대한기계학회 논문집, v.18, no.11, pp.3084 - 3090, 1994-01

8379
SMC 압축성형공정에서의 열변형에 관한 유한요소해석

이재형; 이응식; 윤성기, 대한기계학회논문집, v.21, no.1, pp.154 - 163, 1997-01

8380
SMC 압축성형공정의 3차원 유한요소해석

김수영; 임용택, 소성가공, v.4, no.1, pp.39 - 47, 1995-03

8381
SMC 압축성형의 소재유동과 겹침선 형성에 관한 유한요소 해석

한영원; 임용택, 대한기계학회논문집 A, v.20, no.1, pp.79 - 87, 1996-01

8382
SMC 압축성형의 열 및 유동에 관한 실험적 연구

김기택; 정진호; 임용택, 대한기계학회논문집 A, v.18, no.9, pp.2386 - 2395, 1994-01

8383
SMC 압축성형재의 기계적 물성 및 특성에 관한 연구

김기택; 임용택, 대한기계학회논문집 A, v.18, no.9, pp.2396 - 2403, 1994-01

8384
SMC의 물성치 평가에 관한 연구

정진호; 한영원; 임용택, 소성가공, v.4, no.3, pp.245 - 256, 1995-09

8385
Smooth boundary topology optimization for eigenvalue performance and its application to the design of a flexural stage

Lee, Soobum; Kwak, Byung Man, ENGINEERING OPTIMIZATION, v.40, no.3, pp.271 - 285, 2008

8386
Smooth boundary topology optimization for electrostatic problems through the combination of shape and topological design sensitivities

Kim, Dong-Hun; Lee, Soo Bum; Kwak, Byung Man; Kim, Heung-Geun; Lowther, David A., IEEE TRANSACTIONS ON MAGNETICS, v.44, pp.1002 - 1005, 2008-06

8387
Smooth boundary topology optimization using B-spline and hole generation

Lee, Soobum; Kwak, Byung Man; Kim, Il Yong, INTERNATIONAL JOURNAL OF CAD/CAM, v.7, no.1, pp.16 - 31, 2007

8388
Sn3.5Ag와 Sn0.7Cu 무연솔더에 대한 고온 진동 신뢰성 연구

고용호; 김택수; 이영규; 유세훈; 이창우, 마이크로전자 및 패키징학회지, v.19, no.3, pp.31 - 36, 2012-09

8389
Snap-through dynamics of a buckled flexible filament in a uniform flow

Mao, Qian; Liu, Yingzheng; Sung, Hyung Jin, JOURNAL OF FLUID MECHANICS, v.969, 2023-08

8390
Snap-through dynamics of a buckled flexible filament with different edge conditions

Chen, Zepeng; Mao, Qian; Liu, Yingzheng; Sung, Hyung Jin, PHYSICS OF FLUIDS, v.35, no.10, 2023-10

8391
Snap-through dynamics of buckled IPMC actuator

Jeon, JH; Cheng, TH; Oh, Il-Kwon, SENSORS AND ACTUATORS A-PHYSICAL, v.158, no.2, pp.300 - 305, 2010-03

8392
Snap-through instability of a sheet with inclined clamping ends under fluid flow

Mahravan, Ehsan; Kim, Daegyoum, PHYSICS OF FLUIDS, v.35, no.12, 2023-12

8393
Snap-through oscillations of tandem elastic sheets in uniform flow

Kim, Junsoo; Kim, Hyeonseong; Kim, Daegyoum, JOURNAL OF FLUIDS AND STRUCTURES, v.103, pp.103283, 2021-05

8394
Snapping microswitches with adjustable acceleration threshold

Go, JS; Cho, Young-Ho; Kwak, Byung Man; Park, K, SENSORS AND ACTUATORS A-PHYSICAL, v.54, no.1-3, pp.579 - 583, 1996-06

8395
SNR enhanced high-speed two-photon microscopy using a pulse picker and time gating detection

Song, Jeonggeun; Kang, Juehyung; Kang, Ungyo; Nam, Hyeong Soo; Kim, Hyun Jung; Kim, Ryeong Hyeon; Kim, Jin Won; et al, SCIENTIFIC REPORTS, v.13, no.1, 2023-08

8396
SOA Fiber Ring Lasers: Single-Versus Multiple-Mode Oscillation

Girard, Simon Lambert; Piche, Michel; Chen, Hongxin; Schinn, Gregory W.; Oh, Wang-Yuhl; Bouma, Brett E., IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS, v.17, no.6, pp.1513 - 1520, 2011-11

8397
SOFC 시스템용 디젤 자열개질기 운전을 위한 기초 연구

윤상호; 강인용; 배중면, KSME 2007 ANNUAL SPRING CONFERENCE, 2007

8398
SOFC-예계질기 시스템의 효율 분석

배중면, 대한기계학회 2008년도 열공학부문/유체공학부문 춘계학술대회 논문집, 2008-04

8399
SOFC의 YSZ 전해질에 대한 혼합공기극 연구

배중면; 이창보, 대한기계학회논문집 B, v.31, no.1, pp.62 - 67, 2007-01

8400
Soft and Deformable Sensors Based on Liquid Metals

Kim, Taeyeong; Kim, Dong-min; Lee, Bong Jae; Lee, Jungchul, SENSORS, v.19, no.19, 2019-10

rss_1.0 rss_2.0 atom_1.0