3721 | 펄스 레이저를 이용한 1차원 레인지 파인더의 개발 = Development of 1-dimensional range finder using a pulsed laserlink 황용하; Hwang, Yong-Ha; et al, 한국과학기술원, 1995 |
3722 | 펄스형 Nd:YAG 레이저와 GMA 열원을 이용한 하이브리드 용접에 대한 연구 = A study on hybrid welding with pulsed Nd:YAG laser & GMA heat sourceslink 조원익; Cho, Won-Ik; et al, 한국과학기술원, 2007 |
3723 | 펄트루전 기법으로 제작된 복합재료의 동적 성질에 관한 연구 = Dynamic of properties of pultruded compointe materialslink 변준형; Byun, Joon-Hyung; et al, 한국과학기술원, 1982 |
3724 | 펄트루전에 의해 제작된 유리섬유 복합재료의 기계적 성질에 관한 연구 = Mechanical properties of pultruded glass fiber reinforced plasticslink 이호진; Lee, Ho-Jin; et al, 한국과학기술원, 1982 |
3725 | 펌프 제어형 전동 유압식 조타기구의 성능 해석 = Performance analysis of a pump-controlled electro-hydraulic steering gearlink 홍예선; Hong, Yeh-Sun; et al, 한국과학기술원, 1980 |
3726 | 페놀릭 입자를 참가한 에폭시 복합재의 균열 진전 거동에 관한 연구 = A study on the crack growth behavior of the phenolic bead-particulate epoxylink 조정현; Cho, Jeong-Hyeon; et al, 한국과학기술원, 1994 |
3727 | 페라이트 스테인리스 강의 Chaboche's Model 파라미터 및 저주기 피로거동 = Chaboche's model parameters and low cycle fatigue behavior of ferritic stainless steellink 이희상; Lee, Hee-Sang; et al, 한국과학기술원, 2009 |
3728 | 펨토초 레이저를 이용한 고분해능 합성파 절대거리 간섭계 = High resolution synthetic wavelength absolute distance interferometer using femtosecond pulse laserlink 이주형; Lee, Joo-Hyung; et al, 한국과학기술원, 2007 |
3729 | 펨토초 레이저를 이용한 극미세 광조형 시스템의 정밀도 향상을 위한 복셀 차감법에 관한 연구 = Improvement of precision using contour offset algorithm (COA) in ultramicro stereolithography by femtosecond laserlink 임태우; Lim, Tae-Woo; et al, 한국과학기술원, 2004 |
3730 | 펨토초 레이저의 초점면 방향 제어를 통한 다방향 어블레이션 공정 개발에 관한 연구 = A study on multi-directional ablation process with controlling the focal plane of femtosecond laserlink 하철우; Ha, Cheol-Woo; 양동열; Yang, Dong-Yol; 김승우; Kim, Seung-Woo; et al, 한국과학기술원, 2011 |
3731 | 펨토초 레이저의 표면상 삼차조화파 생성 특성을 활용한 실리콘 웨이퍼의 측정 및 접합 계면의 결함검사 = Silicon wafer’s non-destructive measurement and interface inspection system based on optical Third Harmonic Generation (THG)link 이인재; Lee, In Jae; et al, 한국과학기술원, 2023 |
3732 | 펨토초 펄스 레이저를 위한 실시간 모니터링 및 제어 시스템 = Real-time Monitoring and Control(RMC) system for femtosecond pulse laserslink 장희숙; Jang, Hee-Suk; et al, 한국과학기술원, 2013 |
3733 | 편광 독립성을 가지는 광대역 테라헤르츠 고 굴절률 메타물질 = A Polarization Independent Broadband Terahertz High Refracive Index Metamateriallink 김유신; Kim, Yu-Shin; et al, 한국과학기술원, 2011 |
3734 | 편광 의존 나노 구조체를 이용한 고속 고정밀 광 빗 플라즈모닉 위상 분광 시스템 = Fast and precise plasmonic phase spectroscopy enabled by polarization-dependent nanostructurelink 이건호; 김영진; et al, 한국과학기술원, 2023 |
3735 | 평균 유동을 고려한 모세관 내의 음향 전파 해석 = Acoustic analysis of capillary ducts with mean flowlink 정강원; Jeong, Kang-Won; et al, 한국과학기술원, 1995 |
3736 | 평금형을 이용한 축대칭 열간 압출의 유한요소해석 = Finite element analysis of axisymmetric hot extrusion through square dieslink 강연식; Kang, Yeon-Sick; et al, 한국과학기술원, 1991 |
3737 | 평면 또는 축대칭 변형에 있어서 소성스핀을 수반하는 탄소성 구성방정식 모델에 대한 연구 = A study on an elasto-plastic constitutive modelling with plastic spin in plane or axisymmetric deformationslink 이행수; Lee, Haeng-Soo; et al, 한국과학기술원, 1990 |
3738 | 평면 문제의 탄소성 유한 요소 해석을 위한 미드포인트 룰의 개선 = Enhancement of the midpoint rule for the elasto-plstic finite element analysis of plane problemslink 최누리; Choi, Noo-Ri; et al, 한국과학기술원, 1996 |
3739 | 평면 물체 인식을 위한 원통형 레이져 빔 투사형 시각 정보 처리 시스템의 개발 = Development of a visual-data processing system for a plane object recognition by the projection of laser cylindrical beamlink 김종형; Kim, Jong-Hyeong; et al, 한국과학기술원, 1989 |
3740 | 평면 변형률 요소를 사용한 유한요소 해석법에의한 일정진폭 하중하의 균열열림 해석에 관한 연구 = A study on the crack closure under constant amplitude loading by FEM using plane strain elementlink 김인식; Kim, In-Sik; 송지호; 권인소; et al, 한국과학기술원, 1998 |
3741 | 평면 음향홀로그래피에서 센서간 특성 차이와 측정 위치의 부정확성에 의한 음압 추정 오차의 정량화 = Quantification of acoustic pressure estimation error due to sensor and position mismatch in planar acoustic holographylink 남경욱; Nam, Kyoung-Uk; et al, 한국과학기술원, 1998 |
3742 | 평면 응력 Bore expanding 에 있어서의 평면 이방성의 영향 = The effect of planar anisotropy in plane-stress bore expandinglink 주진원; Joo, Jin-Won; 양동열; 이중홍; et al, 한국과학기술원, 1983 |
3743 | 평면 제트에서의 초기 조건에 대한 실험적 고찰 = Experimental investigation of effect of initial condition on development of 2-dimensional plane jetlink 김동윤; Kim, Dong-Yoon; et al, 한국과학기술원, 1982 |
3744 | 평면벽 근방의 원판의 진동에 의한 축대칭의 느린 비정상 점성유동 = Unsteady axisymmetric slow viscous flow due to the oscillation of a circular disk near a plane walllink 이성훈; Lee, Sung-Hun; et al, 한국과학기술원, 1998 |
3745 | 평면벽면분류의 유입조건을 가지는 이차원 개수로유동에 관한 실험적 연구 = Experimental study of two-dimensional open channel flow with plane wall jet inlet conditionlink 이재인; Lee, Je-In; et al, 한국과학기술원, 1990 |
3746 | 평치차시스템의 진동에 관한 연구 = A study on the vibration of the spur gear systemlink 전재진; Jeon, Jae-Jin; et al, 한국과학기술원, 1984 |
3747 | 평판 경계층 확산화염에서의 국부적 가속현상에 관한 실험적 연구 = An experimental study on the local velocity acceleration in a flat plate boundary layer diffusion flamelink 심성훈; Shim, Sung-Hoon; et al, 한국과학기술원, 1988 |
3748 | 평판 경계층 확산화염의 구조에 관한 실험적 연구 = An experimental study on the structure of a flat plate boundary layer diffusion flamelink 조흥원; Cho, Heung-Weon; et al, 한국과학기술원, 1985 |
3749 | 평판 압연공정 유한요소해석의 분산 병렬처리에 관한 연구 = Finite element analysis of strip rolling process using distributive parallel algorithmlink 권기찬; Gwon, Kie-Chan; et al, 한국과학기술원, 1997 |
3750 | 평판 인텐시티들의 관계를 이용한 근접장 음향인텐시티와 손실계수 측정법 = Measurement of near field sound intensity and loss factor using the relation of plate intensitieslink 김용조; Kim, Yong-Joe; et al, 한국과학기술원, 1997 |
3751 | 평판 캠 및 입체 캠을 위한 CAD/CAM 소프트웨어 개발에 관한 연구 = A study on development of CAD/CAM software for plate cams and spatial camslink 김찬봉; Kim, Chan-Bong; et al, 한국과학기술원, 1991 |
3752 | 평판형 PHP에서 기반물질로의 전도 열전달이 열성능에 미치는 영향에 관한 연구 = The effect of substrate conduction on the thermal performance of a flat plate pulsating heat pipelink 윤애정; Yoon, Ae-Jung; et al, 한국과학기술원, 2014 |
3753 | 평판형 고체 산화물 연료전지의 성능에 관한 수치해석 = Numerical study on the performance of a planar solid oxide fuel celllink 박훈관; Park, Hun-Kwan; et al, 한국과학기술원, 2010 |
3754 | 평판형 액체식 태양열 집열기의 최적설계 및 운전을 위한 각종 변수에 대한 연구 = A parametric study for the optimum thermal design and operation of flat-plate liquid type solar collectorslink 추교명; Choo, Gyo-Myung; et al, 한국과학기술원, 1983 |
3755 | 평행 슬라이드 메커니즘을 이용한 안구 수술용 액티브 로봇 암 = Active robot arm for vitreoretinal surgery using parallel slide mechanismlink 조상호; 권동수; et al, 한국과학기술원, 2018 |
3756 | 평행유동에서 공랭식 열전모듈 냉각시스템의 성능에 관한 연구 = A study on performance of thermoelectric air-cooling system in parall flowlink 신재훈; Shin, Jae-Hoon; et al, 한국과학기술원, 2010 |
3757 | 평행해법을 이용한 박판 성형의 단면 해석 = Sectional analysis of sheet metal forming using the equilibrium approachlink 윤정환; Yoon, Jeong-Hwan; et al, 한국과학기술원, 1993 |
3758 | 폐식용유 바이오디젤 엔진에서 연료 분사 인자에 따른 연소 및 배기특성 = Effects of fuel injection pressure and timing on the combustion and emission characteristics in a heavy-duty diesel engine fueled with waste cooking oil biodiesellink 황준식; Hwang, Joon-Sik; et al, 한국과학기술원, 2013 |
3759 | 포리에틸렌 파이프에 대한 저속 균열 성장 실험 = Slow crack growth behavior of polyethylene pipe materialslink 박관흠; Park, Kwan-Hum; et al, 한국과학기술원, 1981 |
3760 | 포신의 전자 유압식 안정화 시스템에 관한 연구 = Study on the electro-hydraulic stabilization system for a gunlink 황봉동; Hwang, Bong-Dong; et al, 한국과학기술원, 1982 |
3761 | 포옴 심재와 복합적층된 면재를 가진 샌드위치보의 국소 좌굴에 관한 연구 = A study on the flexural wrinkling of the foam-filled sandwich beam with laminated faceslink 한동주; Han, Dong-Juh; 홍창선; 송지호; et al, 한국과학기술원, 1986 |
3762 | 포트홀 금형을 이용한 원형 튜브의 3차원 압출에서 압접 강도 개선을 위한 연구 = Improvement of welding strength in three dimensional extrusion of tubes using porthole dieslink 김경진; Kim, Kyung-Jin; et al, 한국과학기술원, 2001 |
3763 | 포화 요소가 있는 계를 위한 와인드업 방지 보상 방법 = A novel anti-windup compensation for systems with saturating actuatorlink 장원욱; Chang, Won-Woog; et al, 한국과학기술원, 1992 |
3764 | 폴리머 기반 전도성 직물의 기계적/전기적 거동 평가 = Mechanical/electrical behavior of conductive textile based on polymer fiberslink 김지영; 이순복; et al, 한국과학기술원, 2017 |
3765 | 폴리머 모재위의 두 가지 증착 방식에 따른 은 박막의 기계.전기적 특성 분석 = Analysis of electromechanical characterization of silver thin film on polymer substrate using two different deposition technologieslink 원세정; Won, Se-Jeong; et al, 한국과학기술원, 2010 |
3766 | 폴리머 박막과 편평한 원통형 인덴터 팁 사이의 시간에 의존하는 점착력 측정 = Measurement of time-dependent adhesion between a polymer film and a flat-ended indenter tiplink 이승륜; Lee, Seung-ryoon; 엄윤용; Earmme, Youn-Young; et al, 한국과학기술원, 2008 |
3767 | 폴리에틸렌의 안정 균열 성장에 관한 연구 = A study of steady state crack growth in polyethylenelink 김우종; Kim, Woo-Jong; et al, 한국과학기술원, 1985 |
3768 | 표면 근전도 기반의 동시 비례적 다자유도 의수 제어를 위한 손가락 굽힘/폄 의도 추정 = Estimation of finger flexion/extension intention for simultaneous and proportional control of multi-DOF prosthetic hand using sEMGlink 김한길; 김경수; et al, 한국과학기술원, 2023 |
3769 | 표면 마이크로 구조화가 된 탄성복합체 기반의 축 성분 분리 및 성능조절이 가능한 신축성 인장센서의 개발 = Development of stretchable strain sensor based on surface micro-structured elastomer towards biaxial sensitivity and performance modulationlink 김민성; Kim, Min Seong; et al, 한국과학기술원, 2016 |
3770 | 표면 조도가 있는 난류 경계층에서의 난류 구조에 관한 연구 = Organized structure of turbulent boundary layer with rod-roughened walllink 이재화; Lee, Jae-Hwa; et al, 한국과학기술원, 2008 |
3771 | 표면 형상측정을 위한 큰 등가파장 회절격자 간섭계 = Diffraction grating interferometer of large equivalent wavelength for surface flatness testinglink 황태준; Hwang, Tae-Joon; et al, 한국과학기술원, 2000 |
3772 | 표면검사를 위한 3차원 전영역 고분해능 초고속 광간섭단층촬영 = Three-dimensional depth-invariant high-resolution ultrahigh-speed optical coherence tomography for industrial surface inspectionlink 최영석; Choi, Young-Seok; et al, 한국과학기술원, 2024 |
3773 | 표면결함 저감을 위한 신선 공정 설계 = Process design for reduction of surface defects in wire drawinglink 백현무; Baek, Hyun-Moo; et al, 한국과학기술원, 2011 |
3774 | 표면실장부품의 신뢰성확보를 위한 3차원 납 접합부의 형상결정 = Design criteria of 3D solder joint configuration for reliability of surface mount componentslink 주재갑; Joo, Jae-Kap; et al, 한국과학기술원, 1997 |
3775 | 표면실장형 부품의 열피로 실험을 통한 신뢰성 확보에 관한 연구 = A study for reliability assurance of surface mount component through thermal fatigue testingslink 박태상; Park, Tae-Sang; 이순복; 엄윤용; et al, 한국과학기술원, 1998 |
3776 | 표면연삭 과정에서의 적응제어 = Adaptive control in surface grinding processlink 김동해; Kim, Dong-Hae; et al, 한국과학기술원, 1982 |
3777 | 표면의 반사특성을 이용한 타이어의 정보추출과 조명조건 = Illumination condition for extracting tire information mark using surface reflection propertylink 이재용; Lee, Jae-Yong; et al, 한국과학기술원, 1995 |
3778 | 표면적응층을 가지는 새로운 자동격자 재구성 기법과 2차원 단조공정의 강소성 유한요소 해석에의 응용 = A new automatic remeshing technique with surface adaptive layer and its application to rigid-plastic finite element analysis of two-dimensional forging processlink 이영규; Lee, Young-Kyu; et al, 한국과학기술원, 1993 |
3779 | 표면조도가 난류경계층에 미치는 영향 = Roughness effect on a turbulent boundary layerlink 김정훈; Kim, Jung-Hun; et al, 한국과학기술원, 2006 |
3780 | 표면조도가 있는 채널 내 난류 유동의 직접 수치 모사 = Direct numerical simulation of rough-wall turbulent channel flowlink 이승현; Lee, Seung-Hyun; et al, 한국과학기술원, 2004 |