Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article

Showing results 3701 to 3720 of 12331

3701
Effects of thermal residual stresses on failure of co-cured lap joints with steel and carbon fiber-epoxy composite adherends under static and fatigue tensile loads

Shin, KC; Lee, Jungju, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, v.37, no.3, pp.476 - 487, 2006

3702
Effects of thermal treatment on the tribological characteristics of thermoplastic polymer film

Kim, Kwang-Seop; Heo, Jung-Chul; Kim, Kyung-Woong, THIN SOLID FILMS, v.519, no.18, pp.5988 - 5995, 2011-07

3703
Effects of Thickness and Crystallographic Orientation on Tensile Properties of Thinned Silicon Wafers

Lee, Sangmin; Kim, Jae-Han; Kim, Young Suk; Ohba, Takayuki; Kim, Taek-Soo, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.10, no.2, pp.1 - 1, 2020-02

3704
Effects of titanium on grain boundary strength in molybdenum laser weld bead and formation and strengthening mechanisms of brazing layer

Zhang, Liang-Liang; Zhang, Lin-Jie; Long, Jian; Ning, Jie; Zhang, Jian-Xun; Na, Suck-Joo, MATERIALS & DESIGN, v.169, 2019-05

3705
The Effects of Tumble Flow on Lean Burn Characteristics in a Four-Valve SI Engine

Kang, Kern-Yong; Oh, Seung-Mook; Lee, Jin-Wook; Bae, Choong-Sik; Lee, Ki-Hyung, SAE transactions, Vol 106, No3, pp981-989, 1997-02

3706
The Effects of Tumble Flow on Lean Burn Characteristics in a Four-Valve SI Engine

Kang, kernYong; Lee, KiHyung; Bae, ChoongSik, SAE Transactions, Journal of Engines, Vol.106, Sec 3, pp981-989, 1998-04

3707
Effects of tunnel structures of two termite species on territorial competition and territory size

Jeon, Wonju; Lee, Sang-Hee, JOURNAL OF ASIA-PACIFIC ENTOMOLOGY, v.17, no.3, pp.199 - 205, 2014-09

3708
Effects of Turbocharger Rotation Inertia on Instantaneous Turbine Efficiency in a Turbocharged-Gasoline Direct Injection (T-GDI) Engine

Park, Chansoo; Ebisu, Motoki; Bae, Choongsik, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, v.143, no.1, pp.011006, 2021-01

3709
Effects of turbocharger rotational inertia on engine and turbine performance in a turbocharged gasoline direct injection engine under transient and steady conditions

Park, Chansoo; Ebisu, Motoki; Bae, Choongsik, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.23, no.1, pp.90 - 103, 2022-01

3710
Effects of unsteady blowing through a spanwise slot on a turbulent boundary layer

Kim, K; Sung, Hyung Jin, JOURNAL OF FLUID MECHANICS, v.557, pp.423 - 450, 2006-06

3711
Effects of valve events on the engine efficiency in a homogeneous charge compression ignition engine fueled by dimethyl ether

Jang, Jinyoung; Bae, Choongsik, FUEL, v.88, no.7, pp.1228 - 1234, 2009-07

3712
Effects of walking speed and slope on pedobarographic findings in young healthy adults

Koo, Seungbum; Park, Moon Seok; Chung, Chin Youb; Yoon, Ji Soo; Park, Chulhee; Lee, Kyoung Min, PLOS ONE, v.14, no.7, pp.e0220073, 2019-07

3713
Effects of water direct injection on the torque enhancement and fuel consumption reduction of a gasoline engine under high-load conditions

Kim, Jaeheun; Park, Hyunwook; Bae, Choongsik; Choi, Myungsik; Kwak, Younghong, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.17, no.7, pp.795 - 808, 2016-09

3714
Effects of welding conditions on molten drop geometry in arc welding

Joo, TM; Yoo, Choong Don; Lee, TS, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.118, no.4, pp.623 - 627, 1996-11

3715
Efficacy of an AC sinusoidal electric field for apoptosis induction in lung carcinoma cells (A549)

Park, Hyoun-Hyang; Lee, Seung Seob; Lee, Dae Hoon, APPLIED PHYSICS LETTERS, v.101, no.9, 2012-08

3716
Efficiency analysis of radiative slab heating in a walking-beam-type reheating furnace

Han, Sang Heon; Chang, Daejun; Huh, Cheol, ENERGY, v.36, no.2, pp.1265 - 1272, 2011-02

3717
Efficiency Comparison of Multibody Dynamic Analysis Algorithms for Real-time Simulation

Lee, K.-P.; Yoon, Yong-San, JSME INTERNATIONAL JOURNAL, v.41, no.4, pp.813 - 821, 1998-12

3718
Efficiency enhancement in sheet metal forming analysis With a mesh regularization method

Yoon, JH; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.140, no.3, pp.616 - 621, 2003

3719
Efficiency improvement of straight-bladed vertical-axis wind turbines with an upstream deflector

Kim, Daegyoum; Gharib, Morteza, JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, v.115, pp.48 - 52, 2013-04

3720
Efficient and Nonhalogenated Solvent-Processed Organic Solar Cells Enabled by Conjugated Donor–Acceptor Block Copolymers Containing the Same Benzodithiophene Unit

Phan, Tan Ngoc-Lan; Lee, Jin-Woo; Oh, Eun Sung; Lee, Seungjin; Lee, Changyeon; Kim, Taek-Soo; Li, Sheng; et al, ACS APPLIED MATERIALS & INTERFACES, v.14, no.51, pp.57070 - 57081, 2022-12

rss_1.0 rss_2.0 atom_1.0