Showing results 3601 to 3660 of 12271
Effects of adhesive fillers on the strength of tubular single lap adhesive joints Lee, Dai Gil; Kim, JK; Cho, DH, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.13, no.11, pp.1343 - 1360, 1999 |
Effects of Ag addition on solid-state interfacial reactions between Sn-Ag-Cu solder and Cu substrate Yang, Ming; Ko, Yong Ho; Bang, Junghwan; Kim, Taek-Soo; Lee, Chang-Woo; Li, Mingyu, MATERIALS CHARACTERIZATION, v.124, pp.250 - 259, 2017-02 |
Effects of an adverse pressure gradient on a turbulent boundary layer Lee, Joung-Ho; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.29, pp.568 - 578, 2008-06 |
Effects of an axisymmetric contraction on a turbulent pipe flow Jang, Seong-Jae; Sung, Hyung-Jin; Krogstad, Per-Age, JOURNAL OF FLUID MECHANICS, v.687, pp.376 - 403, 2011-11 |
Effects of Angle of Attack on Mass Transfer form a Square Cylinder and its Base Plate S.Y.Yoo; R.J.Goldstein; Chung, Myung Kyoon, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1992 |
Effects of applied pressure and temperature during curing operation on the strength of tubular single-lap adhesive joints Kim, JK; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.18, no.1, pp.87 - 107, 2004 |
Effects of aspect ratio on the hydrodynamics of a self-propelled flexible plate near the ground Zhao, Jiazhen; Mao, Qian; Pan, Guang; Huang, QiaoGao; Sung, Hyung Jin, PHYSICS OF FLUIDS, v.34, no.2, 2022-02 |
Effects of background noise on generating coherent packets of hairpin vortices Kim, Kyoungyoun; Sung, Hyung Jin; Adrian, Ronald J., PHYSICS OF FLUIDS, v.20, 2008-10 |
Effects of basilar membrane arch and radial tension on the travelling wave in gerbil cochlea Chan, Wei Xuan; Yoon, Yong-Jin, HEARING RESEARCH, v.327, pp.136 - 142, 2015-09 |
Effects of bond parameters on fatigue characteristics of a cocured double lap joint subjected to cyclic tensile loads Shin, KC; Lee, Jungju, JOURNAL OF ADHESION, v.79, no.6, pp.581 - 596, 2003-06 |
Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density Ahmed, DH; Sung, Hyung Jin, JOURNAL OF POWER SOURCES, v.162, pp.327 - 339, 2006-11 |
Effects of compressive stress on the nonlinear electromechanical behavior of ferroelectric ceramics Li, F; Fang, DN; Lee, Jungju; Kim, HC, SCIENCE IN CHINA SERIES E-ENGINEERING & MATERIALS SCIENCE, v.49, no.1, pp.29 - 37, 2006-02 |
Effects of Conductive Particles on the Electrical Stability and Reliability of Anisotropic Conductive Film Chip-On-Board Interconnections Chung, Chang-Kyu; Sim, Gidong; Lee, Soon-Bok; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.2, no.3, pp.359 - 366, 2012-03 |
Effects of corona discharge ions on the synthesis of silver nanoparticles by a supersonic nozzle expansion method Jung, Jae Hee; Park, Hyung Ho; Kim, Sang Soo, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, v.25, pp.169 - 174, 2007-01 |
Effects of Cyclic Ratio of Overstress to Understress on Cumulative Fatigue Damage of SUS410J1 Stainless Steel Jono, M; Song, Ji Ho; Uchida, H, 일본기계학회논문집 A (TRANSACTIONS OF JSME - SERIES A), v.50, no.453, pp.973 - 979, 1984 |
Effects of cylinder head temperature and coolant velocity on the erosion behavior of water jacket in a diesel engine Kim, Donghoon; Hwang, Joonsik; Han, Sangwook; Bae, Choongsik, WEAR, v.342, pp.117 - 128, 2015-11 |
Effects of design parameters on the noise of rotor-bearing systems Rho, BH; Kim, DG; Kim, Kyung-Woong, TRIBOLOGY INTERNATIONAL, v.37, no.8, pp.599 - 605, 2004-08 |
Effects of diesel fuel temperature on fuel flow and spray characteristics Park, Youngsoo; Hwang, Joonsik; Bae, Choongsik; Kim, Kihyun; Lee, Jinwoo; Pyo, Soonchan, FUEL, v.162, pp.1 - 7, 2015-12 |
Effects of distance between pads on the inlet pressure build-up on pad bearings Kim, JS; Kim, Kyung-Woong, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.124, no.3, pp.506 - 514, 2002-07 |
Effects of dumbbell blending of light and heavy hydrocracked base oils on the performance of automatic transmission fluids Kwon, Wan-Seop; Henderson, H. Ernest; Kim, Kyung-Woong, TRIBOLOGY & LUBRICATION TECHNOLOGY, v.63, no.1, pp.40 - 52, 2007 |
Effects of dumbbell blending of light and heavy hydrocracked base oils on the performance of automatic transmission fluids Kwon, Wan-Seop; Henderson, HE; Kim, Kyung-Woong, TRIBOLOGY TRANSACTIONS, v.49, pp.490 - 501, 2006-10 |
Effects of electrohydrodynamic flow and turbulent diffusion on collection efficiency of an electrostatic precipitator with cavity walls Park, SJ; Kim, Sang Soo, AEROSOL SCIENCE AND TECHNOLOGY, v.37, no.7, pp.574 - 586, 2003-07 |
Effects of Error Path Delay on Stability of the Filtered-x/Constrained Filtered-x LMS Algorithm 박영진, 한국음향학회지, v.17, no.3, pp.43 - 46, 1998-01 |
Effects of ethylene on carbon formation in diesel autothermal reforming Yoon, S; Kang, I; Bae, Joongmyeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.33, no.18, pp.4780 - 4788, 2008-09 |
Effects of Flexible Conjugation-Break Spacers of Non-Conjugated Polymer Acceptors on Photovoltaic and Mechanical Properties of All-Polymer Solar Cells Chen, Qiaonan; Han, Yung Hee; Franco, Leandro R.; Marchiori, Cleber F. N.; Genene, Zewdneh; Araujo, C. Moyses; Lee, Jin-Woo; et al, NANO-MICRO LETTERS, v.14, no.1, 2022-12 |
Effects of Form Errors of a Micromirror Surface on the Optical System of the TMATM(Thin-film Micromirror ArrayTM) Projector Young Shik Jo; Byoung-Chang Kim; Seung-Woo Kim; Kyu-Ho Hwang, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.1, no.1, pp.98 - 105, 2000-01 |
Effects of geometrical parameters on the boiling limit of bi-porous wicks Byon, Chan; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.55, no.25-26, pp.7884 - 7891, 2012-12 |
Effects of graphene oxide on the electromigration lifetime of lead-free solder joints Ko, Yong Ho; Son, Kirak; Kim, Gahui; Park, Young-Bae; Yu, Dong-Yurl; Bang, Junghwan; Kim, Taek-Soo, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, v.30, no.3, pp.2334 - 2341, 2019-02 |
EFFECTS OF HUMIDITY AND SLIDING SPEED ON THE WEAR PROPERTIES OF SI3N4 CERAMICS LEE, KH; Kim, Kyung-Woong, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.186, no.1-2, pp.185 - 191, 1994-10 |
Effects of hydrophobic agent content in macro-porous substrates on the fracture behavior of the gas diffusion layer for proton exchange membrane fuel cells Kim, Sanwi; Jeong, Byeong-Heon; Hong, Bo Ki; Kim, Taek-Soo, JOURNAL OF POWER SOURCES, v.270, pp.342 - 348, 2014-12 |
Effects of ignition disturbance on flame propagation of methane and propane in a narrow-gap-disk-burner Jang, Hye Jin; Lee, Sang Min; Kim, Nam Il, COMBUSTION AND FLAME, v.215, pp.124 - 133, 2020-05 |
Effects of infiltrated Sr and Mn doped LaCrO3 on porous La0.8Sr0.2Ga0.8Mg0.2O3-delta scaffolds used as anodes in solid oxide fuel cells Yoon, Byoung Young; Kim, Jung Hyun; Bae, Joongmyeon, SOLID STATE IONICS, v.249, pp.26 - 33, 2013-11 |
Effects of inflow pulsation on a turbulent coaxial jet Jang, Seong-Jae; Sung, Hyung-Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.31, pp.351 - 367, 2010-06 |
Effects of internal exhaust gas recirculation on controlled auto-ignition in a methane engine combustion Cho, Gyubaek; Moon, Gunfeel; Jeong, Dongsoo; Bae, Choongsik, FUEL, v.88, no.6, pp.1042 - 1048, 2009-06 |
EFFECTS OF LANDING GEAR NONLINEARITIES ON GROUND RESONANCE OF HELICOPTER Lee, Y.-K.; Kim, K.-J., The Fourteenth International Congress on Sound and Vibration (ICSV14), 2007 |
Effects of local blowing from a slot on a laminar boundary layer Chen, Xue Jiang; Kim, Kyoungyoun; Sung, Hyung Jin, FLUID DYNAMICS RESEARCH, v.38, no.8, pp.539 - 549, 2006-08 |
Effects of low hydrocarbons on the solid oxide fuel cell anode Yoon, Sang-Ho; Kim, Young-Min; Kim, Sun-Young; Bae, Joong-Myeon, JOURNAL OF SOLID STATE ELECTROCHEMISTRY, v.14, no.10, pp.1793 - 1800, 2010-10 |
Effects of mechanically different environments on the crawling waveform of Caenorhabditis elegans Kim, Dae-Yeon; Byeon, Soo-Yung; Kim, Se-Ho; Shin, Jennifer Hyunjong, Transactions of the Korean Society of Mechanical Engineers, v.36, no.2, pp.125 - 130, 2012-02 |
Effects of Microstructural Functional Layers on Flat-Tubular Solid Oxide Fuel Cells Choi, B. H.; Jang, I. W.; Sung, Hyung Jin, FUEL CELLS, v.13, no.6, pp.1088 - 1100, 2013-12 |
Effects of microstructure on material Behaviors of solder alloys Hwang, TK; Lee, Soon-Bok, ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4 BOOK SERIES: KEY ENGINEERING MATERIALS, v.297-300, pp.1 - 4, 2005 |
Effects of Microwave-Assisted Cross-Linking on the Creep Resistance and Sensing Accuracy of a Coaxial-Structured Fiber Strain Sensor On, Seung Yoon; Park, Seong Yeon; Chung, Yong Sik; Kim, Seong Su, ADVANCED MATERIALS TECHNOLOGIES, v.8, no.6, 2023-03 |
Effects of minimal exposures to atmospheric pressure plasma on the activity of Salmonella Typhimurium: Deactivation of bacterial motility and suppression of host-cell invasion Park, Jin-Sung; Kim, Kijung; Han, Je-Hyun; Gweon, Bomi; Ko, Ung Hyun; Yoo, Suk Jae; Choe, Wonho; et al, ARCHIVES OF BIOCHEMISTRY AND BIOPHYSICS, v.605, pp.67 - 75, 2016-09 |
EFFECTS OF MIXED CONVECTION FLOW ON AEROSOL GENERATION IN A CONDENSER TUBE Kim, Young Kag; Kim, Sang Soo, AEROSOL SCIENCE AND TECHNOLOGY, v.20, no.2, pp.136 - 148, 1994-02 |
Effects of Multi-Stage Split Injection on Efficiency and Emissions of Light-Duty Diesel Engine Kang, Seungwoo; Lee, Sanguk; Bae, Choongsik, ENERGIES, v.15, no.6, 2022-03 |
Effects of multilayered graphene on the performance of near-field thermophotovoltaic system at longer vacuum gap distances Lim, Mikyung; Lee, Seung-Seob; Lee, Bong Jae, JOURNAL OF QUANTITATIVE SPECTROSCOPY RADIATIVE TRANSFER, v.197, no.Special SI, pp.84 - 94, 2017-08 |
EFFECTS OF N-2/CO2 DILUTION ON FLAME PROPAGATION VELOCITIES AND QUENCHING DISTANCES OF OXY-METHANE PREMIXED MIXTURES USING AN ANNULAR-STEPWISE-DIVERGING-TUBE (ASDT) Kim, Hun Young; Lee, Jiseop; Kim, Nam Il, MATHEMATICAL MODELLING OF NATURAL PHENOMENA, v.13, no.6, 2018-12 |
Effects of nearfield waves and phase information on the vibration analysis of curved beams Jeong, Cheol-Ho; Ih, Jeong-Guon, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.23, no.8, pp.2193 - 2205, 2009-08 |
Effects of normal strain in core material on modal property of sandwich plates Lee, BC; Kim, Kwang-joon, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, v.119, pp.493 - 503, 1997 |
Effects of Nozzle Orifice Diameter and Hole Number on Diesel Combustion and Engine Performance Kang, Seungwoo; Lee, Sanguk; Hong, Dongwoo; Bae, Choongsik, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.23, no.2, pp.481 - 494, 2022-04 |
Effects of operating parameters on mode transition between low-temperature combustion and conventional combustion in a light-duty diesel engine Han, Sang-Wook; Bae, Choong-Sik; Choi, Seibum B, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.14, no.3, pp.231 - 246, 2013-06 |
Effects of oscillation amplitudes on heat transfer mechanisms of pulsating heat pipes Jung, Chuljae; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.165, pp.120642, 2021-02 |
Effects of oxidant composition on premixed propane flames in a narrow-gap disk burner at elevated pressures Lee, Sang Min; Jang, Hye Jin; Kim, Nam Il, COMBUSTION AND FLAME, v.251, 2023-05 |
Effects of pad metallization on the low cycle fatigue characteristics of Sn-based solder joints Lee, K. O.; Yu, Jin; Park, T. S.; Lee, Soon-Bok, INTERNATIONAL JOURNAL OF FATIGUE, v.48, pp.1 - 8, 2013-03 |
Effects of particle shape on the unipolar diffusion charging of nonspherical particles Oh, H; Park, H; Kim, Sang Soo, AEROSOL SCIENCE AND TECHNOLOGY, v.38, pp.1045 - 1053, 2004-11 |
Effects of particle space charge and turbulent diffusion on performance of plate-plate electrostatic precipitators Park, SJ; Kim, Sang Soo, JOURNAL OF ELECTROSTATICS, v.45, no.2, pp.121 - 137, 1998-12 |
Effects of periodic blowing from spanwise slot on a turbulent boundary layer Kim, K; Sung, Hyung Jin, AIAA JOURNAL, v.41, no.9, pp.1916 - 1924, 2003-10 |
Effects of physical property changes of expelled respiratory liquid on atomization morphology Gidreta, Biruk Teka; Kim, Hyoungsoo, JOURNAL OF FLUID MECHANICS, v.960, 2023-03 |
Effects of Post-annealing and Co Interlayer Between SiNx and Cu on the Interfacial Adhesion Energy for Advanced Cu Interconnections Lee, Hyeonchul; Jeong, Minsu; Kim, Gahui; Son, Kirak; Seo, Jeongmin; Kim, Taek-Soo; Park, Young-Bae, ELECTRONIC MATERIALS LETTERS, v.16, no.4, pp.311 - 320, 2020-07 |
Effects of post-treatment of meta-aramid nanofiber mats on the adhesion strength of epoxy adhesive joints On, Seung Yoon; Kim, Moo Sun; Kim, Seong Su, COMPOSITE STRUCTURES, v.159, pp.636 - 645, 2017-01 |
Effects of preparation method on exsolution and alloy formation in a PtRu bimetallic catalyst for hydrogen production via diesel reforming: Impregnation versus combustion synthesis Lee, Jaemyung; Bae, Minseok; Bae, Joongmyeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.47, no.68, pp.29327 - 29336, 2022-08 |
Discover