Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 3601 to 3660 of 12455
| Effect of tensile speed on the failure load of a spot weld under combined loading conditions Song, Jung-Han; Huh, Hoon; Lim, Ji-Ho; Park, Sung-Ho, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.22, no.9-11, pp.1469 - 1474, 2008-04 |
| Effect of the air-conditioning system on the fuel economy in a gasoline engine vehicle Lee, Jungwoo; Kim, Jaeheun; Park, Jungseo; Bae, Choongsik, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.227, pp.66 - 77, 2013 |
| Effect of the Core/Shell-Structured Meta-Aramid/Epoxy Nanofiber on the Mechanical and Thermal Properties in Epoxy Adhesive Composites by Electrospinning Oh, Hyun Ju; Kim, Hak Yong; Kim, Seong Su, JOURNAL OF ADHESION, v.90, no.9, pp.787 - 801, 2014-09 |
| Effect of the Prandtl number on heatup of a contained, stratified fluid Hyun, Jae Min, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, v.107, no.0, pp.982 - 984, 1985-01 |
| Effect of the ratio of coronary arterial lumen volume to left ventricle myocardial mass derived from coronary CT angiography on fractional flow reserve Taylor, Charles A.; Gaur, Sara; Leipsic, Jonathon; Achenbach, Stephan; Berman, Daniel S.; Jensen, Jesper M.; Dey, Damini; et al, JOURNAL OF CARDIOVASCULAR COMPUTED TOMOGRAPHY, v.11, no.6, pp.429 - 436, 2017-11 |
| Effect of the shape of imprinted alignment layer on the molecular orientation of liquid crystal Hah, Hyundae; Sung, Shi-Joon; Han, Manhee; Lee, Seung Seob; Park, Jung-Ki, MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, v.27, no.4, pp.798 - 801, 2007-05 |
| Effect of the size of the sheet with sheared protrusions on the deformed shape after springback Lee, Chang Whan; Yang, Dong-Yol, Materials and Design, v.95, pp.348 - 357, 2016-04 |
| Effect of the smart cure cycle on the performance of the co-cured aluminum/composite hybrid shaft Kim, HS; Park, SW; Hwang, HY; Lee, Dai Gil, COMPOSITE STRUCTURES, v.75, no.1-4, pp.276 - 288, 2006-09 |
| Effect of the unmixedness of unburned gases on the pressure fluctuations in a dump combustor Hong, Jung Goo; Oh, KC; Do Lee, U; Shin, Hyun Dong, ENERGY & FUELS, v.22, no.4, pp.2221 - 2228, 2008-07 |
| Effect of thermomechanical treatment on mechanical and electrical properties of Cu-Cr-Zr alloy in continuous hybrid process Joo, Ho Seon; Hwang, Sun Kwang; Im, Yong-Taek, Procedia Manufacturing, v.15, pp.1525 - 1532, 2018-08 |
| Effect of Time-Dependent Heating on the Onset of Rayleigh-Benard Convection Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.54, pp.933 - 941, 1985 |
| Effect of tip clearance on the cooling performance of a microchannel heat sink Min, Jung Yim; Jang, Seok Pil; Kim, SungJin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.47, no.5, pp.1099 - 1103, 2004-02 |
| Effect of titanium nitride inclusions on the mechanical properties of direct laser deposited Inconel 718 Lim, Kwang-Hyeok; Ryou, Ken Hee; Choi, Jae Hoon; Choi, Gwanghyo; Choi, Wonseok; Lee, Jeong Hwan; Oh, Chang-Seok; et al, EXTREME MECHANICS LETTERS, v.61, 2023-06 |
| Effect of transformation plasticity on residual stress fields in laser surface hardening treatment Yang, Y.-S.; Na, Suck-Joo, JOURNAL OF HEAT TREATING, v.9, no.1, pp.49 - 56, 1991-03 |
| Effect of tube alignment on the heat/mass transfer from a plate fin and two-tube assembly: naphthalene sublimation results Kim, JY; Song, Tae-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.46, no.16, pp.3051 - 3059, 2003-07 |
| Effect of typical modeling assumptions for pulverized coal char combustion commonly used in commercial CFD codes Kim, Daehee; Choi, Sangmin, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.11, pp.4951 - 4961, 2015-11 |
| Effect of unsintered gadolinium-doped ceria buffer layer on performance of metal-supported solid oxide fuel cells using unsintered barium strontium cobalt ferrite cathode Kim, Yu-Mi; Kim-Lohsoontorn, Pattaraporn; Bae, Joong-Myeon, JOURNAL OF POWER SOURCES, v.195, no.19, pp.6420 - 6427, 2010-10 |
| Effect of various driving forces on heat and mass transfer in arc welding Kim, WH; Fan, HG; Na, Suck-Joo, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, v.32, no.6, pp.633 - 652, 1997 |
| Effect of Various Factors on the Operational Stability of Immobilized Cells for Acrylamide Production in a Packed-Bad Reactor Cheo Young Lee; Sang Kyo Choi; 김문언; 장호남, 한국화학공학회지, v.3, no.1, pp.36 - 45, 1993 |
| Effect of viscosity-inducing factors on oxygen transfer in production culture of bacterial cellulose Kim, SeongJun; Li, Hongxian; Oh, IlKwon; Kee, ChangDoo; Kim, MyongJun, KOREAN JOURNAL OF CHEMICAL ENGINEERING, v.29, no.6, pp.792 - 797, 2012-06 |
| Effect of vision coherent sensory cue on roll tilt perception and sensory weighting Lim, Hyerim; Park, Sukyung, Transactions of the Korean Society of Mechanical Engineers, v.36, no.11, pp.1091 - 1097, 2012-11 |
| Effect of wall heating on turbulent boundary layers with temperature-dependent viscosity Lee, Jin; Jung, Seo Yoon; Sung, Hyung Jin; Zaki, Tamer A., JOURNAL OF FLUID MECHANICS, v.726, pp.196 - 225, 2013-07 |
| Effect of wear debris on the tribological characteristics of carbon fiber epoxy composites Lee, Hak Gu; Hwang, Hui Yun; Lee, Dai Gil, WEAR, v.261, no.3-4, pp.453 - 459, 2006-08 |
| EFFECT OF WELD POOL DEFORMATION ON WELD PENETRATION IN STATIONARY GAS TUNGSTEN ARC-WELDING KIM, SD; Na, Suck-Joo, WELDING JOURNAL, v.71, no.5, pp.S179 - S193, 1992-05 |
| Effective Approach for Fabricating Highly Precise High-Curvature Structural Patterns via Air-Bubble Induction Song, Tae-Eun; Oh, Sang-Ah; Ahn, Chi Won; Oh, Il-Kwon; Jeon, Hwan-Jin, LANGMUIR, v.39, no.44, pp.15785 - 15791, 2023-10 |
| Effective control of optimum dressing according to gap increase by using multilayered neural networks Kim, Jeong-Du; Lee, ES, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.11, no.2, pp.120 - 126, 1996 |
| Effective direct writing of hierarchical 3D polymer micromeshes by continuous out-of-plane longitudinal scanning Ha, Cheol-Woo; Prabhakaran, Prem; Son, Yong; Lee, Kwang-Sup; Yang, Dong-Yol, MACROMOLECULAR RESEARCH, v.25, no.11, pp.1129 - 1134, 2017-11 |
| EFFECTIVE ELASTIC-MODULI IN FIBER-REINFORCED COMPOSITE WITH CIRCULAR-ARC SHAPED INTERFACIAL CRACKS Earmme, Youn-Young, INTERNATIONAL JOURNAL OF FRACTURE, v.71, no.1, pp.85 - 93, 1995 |
| Effective fabrication of three-dimensional nano/microstructures in a single step using multilayered stamp Park, SH; Lim, TW; Yang, Dong-Yol; Yang, DY; Kim, KD; Lee, KS; Kong, Hong-Jin, APPLIED PHYSICS LETTERS, v.88, pp.103 - 109, 2006-05 |
| Effective image enhancement techniques for fog-affected indoor and outdoor images Kim, Kyung Il; Kim, Soohyun; Kim, Kyung-Soo, IET IMAGE PROCESSING, v.12, no.4, pp.465 - 471, 2018-04 |
| Effective material properties and thermal stress analysis of epoxy molding compound in electronic packaging Shin, DK; Lee, Jungju, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART B-ADVANCED PACKAGING, v.21, no.4, pp.413 - 421, 1998-11 |
Effective Radiative Properties of Tilted Metallic Nanorod Arrays Considering Polarization Coupling Lattery, Dustin M.; Kim, Mingeon; Choi, Jongin; Lee, Bong Jae; Wang, Xiaojia, SCIENTIFIC REPORTS, v.8, 2018-09 |
| Effective suppression of pneumatic vibration isolators by using input-output linearization and time delay control Chang, Pyung-hun; Han, Dong Ki; Shin, Yun-ho; Kim, Kwang-joon, JOURNAL OF SOUND AND VIBRATION, v.329, no.10, pp.1636 - 1652, 2010-05 |
| Effective thermal conductivity and permeability of aluminum foam materials Paek, JW; Kang, BH; Kim, SY; Hyun, Jae Min, INTERNATIONAL JOURNAL OF THERMOPHYSICS, v.21, no.2, pp.453 - 464, 2000-03 |
| Effective thermal conductivity of various filling materials for vacuum insulation panels Kwon, Jae-Sung; Jang, Choong-Hyo; Jung, Hae-Yong; Song, Tae-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.52, no.23-24, pp.5525 - 5532, 2009 |
| Effective utilization of operating condition in production of sintered ore Kang, Hee Jin; Choi, Sangmin; Yang, W.; Cho, B., PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, v.226, no.A1, pp.37 - 48, 2012 |
| Effectiveness analysis of pre-cooling methods on hydrogen liquefaction process Yang, Yejun; Park, Taejin; Kwon, Dohoon; Jin, Linxue; Jeong, Sangkwon, PROGRESS IN SUPERCONDUCTIVITY AND CRYOGENICS, v.22, no.3, pp.20 - 24, 2020-09 |
| Effectiveness of arthroscopically assisted surgery for ankle fractures: A meta-analysis Lee, Kyoung Min; Ahmed, Sonya; Park, Moon Seok; Sung, Ki Hyuk; Lee, Seung Yeol; Koo, Seungbum, INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED, v.48, no.10, pp.2318 - 2322, 2017-10 |
| Effectiveness of Mental Health Care by Using Machine Learning on Manufacturing Worker Lim, Jongwoo; Lee, Suhan; Noh, Jinhong; Lee, Wonhee; Su, Pei-Chen; Yoon, Yong Jin, International Journal of Precision Engineering and Manufacturing-Smart Technology, v.1, no.2, pp.227 - 242, 2023-07 |
| Effectiveness of multi-junction cells in near-field thermophotovoltaic devices considering additional losses Song, Jaeman; Choi, Minwoo; Lee, Bong Jae, NANOPHOTONICS, v.13, no.5, pp.813 - 823, 2024-03 |
| Effects and limitations of superhydrophobic surfaces on the heat transfer performance of a two-phase closed thermosyphon Seo, Donghyun; Park, Jinsoo; Shim, Jaehwan; Nam, Jeonghyeon; Shin, Dong Hwan; Nam, Youngsuk; Lee, Jungho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.176, pp.121446, 2021-09 |
| Effects and Mechanism of Particulate Matter on Tendon Healing Based on Integrated Analysis of DNA Methylation and RNA Sequencing Data in a Rat Model Lee, Su-Yel; Lee, Min-Hyeok; Jo, Seong-Kyeong; Yoo, In-Ha; Sarankhuu, Boler-Erdene; Kim, Hyun-Jin; Kang, Yea-Eun; et al, INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, v.23, no.15, 2022-08 |
| Effects of a damaged composite face to the electromagnetic wave transmission characteristics of low-observable radomes Choi, Il-Beom; Kim, Jin-Gyu; Lee, Dai-Gil; Seo, Il-Sung, COMPOSITE STRUCTURES, v.93, no.11, pp.2740 - 2747, 2011-10 |
| Effects of a guard plate on the characteristics of an electrospray in the cone-jet mode Park, H; Kim, K; Kim, Sang Soo, JOURNAL OF AEROSOL SCIENCE, v.35, no.11, pp.1295 - 1312, 2004-11 |
| Effects of a piezo-actuator on a finitely deformed beam subjected to general loading Im, Seyoung; Atluri, S.N., AIAA JOURNAL, v.27, no.12, pp.1801 - 1807, 1989-12 |
| Effects of a split injection in a spray-guided direct-injection spark ignition engine under lean stratified operation Oh, Hee Chang; Bae, Choongsik, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.228, no.10, pp.1232 - 1244, 2014-09 |
| Effects of adhesive fillers on the strength of tubular single lap adhesive joints Lee, Dai Gil; Kim, JK; Cho, DH, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.13, no.11, pp.1343 - 1360, 1999 |
| Effects of Ag addition on solid-state interfacial reactions between Sn-Ag-Cu solder and Cu substrate Yang, Ming; Ko, Yong Ho; Bang, Junghwan; Kim, Taek-Soo; Lee, Chang-Woo; Li, Mingyu, MATERIALS CHARACTERIZATION, v.124, pp.250 - 259, 2017-02 |
| Effects of an adverse pressure gradient on a turbulent boundary layer Lee, Joung-Ho; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.29, pp.568 - 578, 2008-06 |
| Effects of an axisymmetric contraction on a turbulent pipe flow Jang, Seong-Jae; Sung, Hyung-Jin; Krogstad, Per-Age, JOURNAL OF FLUID MECHANICS, v.687, pp.376 - 403, 2011-11 |
| Effects of Angle of Attack on Mass Transfer form a Square Cylinder and its Base Plate S.Y.Yoo; R.J.Goldstein; Chung, Myung Kyoon, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1992 |
| Effects of applied pressure and temperature during curing operation on the strength of tubular single-lap adhesive joints Kim, JK; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.18, no.1, pp.87 - 107, 2004 |
| Effects of aspect ratio on the hydrodynamics of a self-propelled flexible plate near the ground Zhao, Jiazhen; Mao, Qian; Pan, Guang; Huang, QiaoGao; Sung, Hyung Jin, PHYSICS OF FLUIDS, v.34, no.2, 2022-02 |
| Effects of background noise on generating coherent packets of hairpin vortices Kim, Kyoungyoun; Sung, Hyung Jin; Adrian, Ronald J., PHYSICS OF FLUIDS, v.20, 2008-10 |
| Effects of basilar membrane arch and radial tension on the travelling wave in gerbil cochlea Chan, Wei Xuan; Yoon, Yong-Jin, HEARING RESEARCH, v.327, pp.136 - 142, 2015-09 |
| Effects of bond parameters on fatigue characteristics of a cocured double lap joint subjected to cyclic tensile loads Shin, KC; Lee, Jungju, JOURNAL OF ADHESION, v.79, no.6, pp.581 - 596, 2003-06 |
| Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density Ahmed, DH; Sung, Hyung Jin, JOURNAL OF POWER SOURCES, v.162, pp.327 - 339, 2006-11 |
| Effects of compressive stress on the nonlinear electromechanical behavior of ferroelectric ceramics Li, F; Fang, DN; Lee, Jungju; Kim, HC, SCIENCE IN CHINA SERIES E-ENGINEERING & MATERIALS SCIENCE, v.49, no.1, pp.29 - 37, 2006-02 |
| Effects of Conductive Particles on the Electrical Stability and Reliability of Anisotropic Conductive Film Chip-On-Board Interconnections Chung, Chang-Kyu; Sim, Gidong; Lee, Soon-Bok; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.2, no.3, pp.359 - 366, 2012-03 |
| Effects of corona discharge ions on the synthesis of silver nanoparticles by a supersonic nozzle expansion method Jung, Jae Hee; Park, Hyung Ho; Kim, Sang Soo, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, v.25, pp.169 - 174, 2007-01 |
Discover
Open Access
Date issued
- 4,408 2020 - 2024
- 12,350 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989