Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article

Showing results 3481 to 3540 of 12275

3481
Effect of high glass transition temperature on reliability of Non-Conductive Film (NCF)

Park, J.-H.; Chung, C.-K.; Paik, Kyung-Wook; Lee, Soon-Bok, KEY ENGINEERING MATERIALS, v.326-328, no.0, pp.517 - 520, 2006

3482
Effect of holes and edges on the squeeze film damping of perforated micromechanical structures

E.S. Kim; Y.H.Cho; Kim, Moon Uhn, IEEE JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, v.8, pp.296 - 301, 1999

3483
Effect of Hydrate Shell Formation on the Stability of Dry Water

Park, Ju-Woon; Shin, Kyuchul; Kim, Jakyung; Lee, Huen; Seo, Yu-Taek; Maeda, Nobuo; Tian, Wendy; et al, JOURNAL OF PHYSICAL CHEMISTRY C, v.119, no.4, pp.1690 - 1699, 2015-01

3484
Effect of hydrophobic microstructured surfaces on conductive ink printing

Kim, S; Kang, HW; Lee, KH; Sung, Hyung Jin, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.21, no.9, 2011-09

3485
Effect of initial cooling on heat and mass transfer at the cryogenic surface under natural convective condition

Choi, Sangho; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.112, pp.850 - 861, 2017-09

3486
Effect of initial lean on scaling of postural feedback responses

Park, Sukyung; Horak, FB; Kuo, AD, KEY ENGINEERING MATERIALS, v.277-279, pp.142 - 147, 2005

3487
Effect of initial microstructure on mechanical properties in warm caliber rolling of high carbon steel

Oh, YS; Son, IH; Jung, KH; Kim, DK; Lee, DL; Im, Yong-Taek, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.528, no.18, pp.5833 - 5839, 2011-07

3488
Effect of injection and ignition timing on a hydrogen-lean stratified charge combustion engine

Lee, Sanguk; Kim, Gyeonggon; Bae, Choongsik, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.23, no.5, pp.816 - 829, 2022-05

3489
Effect of injection parameters on the combustion and emission characteristics in a common-rail direct injection diesel engine fueled with waste cooking oil biodiesel

Hwang, Joonsik; Qi, Donghui; Jung, Yongjin; Bae, Choongsik, RENEWABLE ENERGY, v.63, pp.9 - 17, 2014-03

3490
Effect of injection pressure and injection timing on spray and flame characteristics of spray-guided direct-injection spark-ignition engine under lean stratified combustion operation

Oh, Hee Chang; Lee, M.; Park, J.; Bae, Choongsik, Transactions of the Korean Society of Mechanical Engineers, B, v.37, no.3, pp.221 - 228, 2013-03

3491
Effect of injection strategy on smoothness, emissions and soot characteristics of PCCI-conventional diesel mode transition

Rohani, Behzad; Park, Stephen Sungsan; Bae, Choongsik, APPLIED THERMAL ENGINEERING, v.93, pp.1033 - 1042, 2016-01

3492
Effect of injector configurations on combustion and emissions in a gasoline direct-injection compression ignition engine under low-load conditions

Kim, Kihyun; Jung, Yongjin; Kim, Donghoon; Bae, Choongsik, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.17, no.3, pp.316 - 330, 2016-03

3493
Effect of interlayer sliding on the estimation of elastic modulus of multilayer graphene in nanoindentation simulation

Han, Jihoon; Ryu, Seunghwa; Kim, Dong-Kyu; Woo, Wanchuck; Sohn, Dongwoo, EPL, v.114, no.6, 2016-06

3494
Effect of ionic mobility of working electrolyte on electrokinetic energy conversion in sub-micron channels

Kim, Dong-Kwon; Kim, Duckjong; Kim, SungJin; Park, Sang-Jin, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, v.49, no.7, pp.1128 - 1132, 2010-07

3495
Effect of joint gap on bead formation in laser butt welding of stainless steel

Zhang, Yan-Xi; Han, Sang-Woo; Cheon, Jason Hyeonpil; Na, Suck-Joo; Gao, Xiang-Dong, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.249, pp.274 - 284, 2017-11

3496
Effect of Keratinocytes on Myofibroblasts in Hypertrophic Scars

Lee, Joon Seok; Kim, Jong Seong; Lee, Jeong Woo; Choi, Kang Young; Yang, Jung Dug; Cho, Byung Chae; Oh, Eun Jung; et al, AESTHETIC PLASTIC SURGERY, v.43, no.5, pp.1371 - 1380, 2019-10

3497
Effect of kinetic hydrate inhibitor and liquid hydrocarbon on the heterogeneous segregation and deposition of gas hydrate particles

Shin, Kyuchul; Kim, Jakyung; Seo, Yu-Taek; Kang, Seong-Pil, KOREAN JOURNAL OF CHEMICAL ENGINEERING, v.31, no.12, pp.2177 - 2182, 2014-12

3498
Effect of lanthanide (Ln=La, Nd, and Pr) doping on electrochemical performance of Ln2NiO4+δ−YSZ composite cathodes for solid oxide fuel cells

Kim, Doyeub; Lee, Kang Taek, CERAMICS INTERNATIONAL, v.47, no.2, pp.2493 - 2498, 2021-01

3499
EFFECT OF LARGE-SCALE TURBULENT STRUCTURES ON THE LIFT-OFF BEHAVIOR OF TURBULENT-JET DIFFUSION FLAMES

Park, JW; Shin, Hyun Dong, JOURNAL OF THE INSTITUTE OF ENERGY, v.66, no.469, pp.198 - 206, 1993-12

3500
Effect of Laser-Induced Plasma to Gaseous Flow

Yi, Junghwa; Bae, Choongsik; Renaud, Antoine; Zimmer, Laurent, TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, v.43, no.8, pp.549 - 554, 2019-08

3501
Effect of late intake valve closing on the particle number emissions of a turbocharged gasoline direct injection engine

Shin, Ji Yong; Lee, Sanguk; Bae, Choongsik; Jung, Jinyoung; Son, Yousang; Heo, Hangpyo; Lee, Juhun, FUEL PROCESSING TECHNOLOGY, v.230, 2022-06

3502
Effect of leading and trailing torch configuration on mixing and fluid behavior of laser-gas metal arc hybrid welding

Muhammad, Sohail; Miikka, Karhu; Na, Suck-Joo; Han, Sang-Woo; Veli, Kujanpaa, JOURNAL OF LASER APPLICATIONS, v.29, no.4, 2017-11

3503
Effect of light scattering on the performance of a direct absorption solar collector

Won, Kwang Hyun; Lee, Bong Jae, FRONTIERS IN ENERGY, v.12, no.1, pp.169 - 177, 2018-03

3504
EFFECT OF LIQUID-LEVEL ON FLOW BEHAVIORS INSIDE A MULTISTAGE FLASH EVAPORATOR - A NUMERICAL PREDICTION

SEUL, KW; Lee, Sang Yong, DESALINATION, v.85, no.2, pp.161 - 177, 1992-02

3505
Effect of local forcing on a turbulent boundary layer

Park, SH; Lee, I; Sung, Hyung Jin, EXPERIMENTS IN FLUIDS, v.31, pp.384 - 393, 2001

3506
Effect of Marangoni condensation on the heat transfer performance of two-phase closed thermosyphons

Seo, Donghyun; Seo, Jin Hyeuk; Shim, Jaehwan; Nam, Youngsuk; Lee, Jungho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.202, 2023-03

3507
Effect of microneedle on the pharmacokinetics of ketoprofen from its transdermal formulations

So, Jae-Woo; Park, Hyoun-Hyang; Lee, Seung Seob; Kim, Dong-Chool; Shin, Sang-Chul; Cho, Cheong-Weon, DRUG DELIVERY, v.16, no.1, pp.52 - 56, 2009

3508
Effect of microstructure on blood cell clogging in blood separators based on capillary action

Kim, Duckjong; Yun, Jae Young; Park, Sang-Jin; Lee, Seung Seob, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, v.15, no.2, pp.227 - 233, 2009-02

3509
Effect of mixture formation mode on the combustion and emission characteristics in a hydrogen direct-injection engine under different load conditions

Lee, Sanguk; Kim, Gyeonggon; Bae, Choongsik, APPLIED THERMAL ENGINEERING, v.209, 2022-06

3510
Effect of molding parameters on compression molded sheet molding compounds parts

Kim, KT; Jeong, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.67, no.1-3, pp.105 - 111, 1997-05

3511
Effect of Nanofiber Orientation on Nanofiber Solder Anisotropic Conductive Films Joint Properties and Bending Reliability of Flex-on-Flex Assembly

Kim, Tae-Wan; Lee, Tae-Ik; Pan, Yan; Kim, Wansun; Zhang, Shuye; Kim, Taek-Soo; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.6, no.9, 2016-09

3512
Effect of Ni-Gd0.1Ce0.9O1.95 Anode Functional Layer Composition on Performance of Lower Temperature SOFCs

Lee, Kang Taek; Vito, Nicolas J.; Yoon, Hee Sung; Wachsman, Eric D., JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.159, no.7, pp.F187 - F193, 2012-07

3513
Effect of non-uniform perforation in the long concentric resonator on transmission loss and back pressure

Lee, Seong-Hyun; Ih, Jeong-Guon, JOURNAL OF SOUND AND VIBRATION, v.311, no.1-2, pp.280 - 296, 2008-03

3514
EFFECT OF NONUNIFORM WIND SHEAR ON THE INTENSIFICATION AND REFLECTION OF MOUNTAIN WAVES

Hyun, Jae Min; KIM, MU, JOURNAL OF THE ATMOSPHERIC SCIENCES, v.36, no.12, pp.2379 - 2384, 1979-01

3515
EFFECT OF NOZZLE HOLE GEOMETRY ON NON-EVAPORATING DIESEL SPRAY CHARACTERISTICS AT HIGH-PRESSURE INJECTION

Kong, Jang-Sik; Bae, Choong-Sik, ATOMIZATION AND SPRAYS, v.22, no.1, pp.1 - 21, 2012

3516
Effect of obstructions on the particle collection efficiency in a two-stage electrostatic precipitator

Suh, YJ; Kim, Sang Soo, JOURNAL OF AEROSOL SCIENCE, v.27, no.1, pp.61 - 74, 1996-01

3517
Effect of off-γ-fiber texture components on R-value anisotropy and cup-drawing behavior in high-strength steel sheets

Kim, Eun Young; Choi, Shi Hoon; Yoon, Jeong Whan, AIP Conference Proceedings, v.1383, pp.360 - 364, 2011

3518
Effect of ortho-para conversion on economics of liquid hydrogen tanker with pressure cargo tanks

You, Hwalong; Ahn, Junkeon; Jeong, Sangkwon; Chang, Daejun, SHIPS AND OFFSHORE STRUCTURES, v.13, no.Sup1, pp.79 - 85, 2018-01

3519
Effect of oxygen concentration on highly diluted charge compression ignition combustion in an optical engine

Jung, Yongjin; Park, Stephen Sungsan; Bae, Choongsik, APPLIED THERMAL ENGINEERING, v.90, pp.538 - 550, 2015-11

3520
Effect of particle size on the UV pulsed-laser scribing in computational fluid dynamics-based simulations

Park, Kwan-Woo; Na, Suck-Joo, JOURNAL OF APPLIED PHYSICS, v.107, no.11, 2010-06

3521
Effect of piezo-driven and solenoid-driven needle opening of common-rail diesel injectors on internal nozzle flow and spray development

Lee, J.W.; Min, K.D.; Kang, K.Y.; Bae, Choongsik; Giannadakis, E.; Gavaises, M.; Arcoumanis, C., INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.7, no.6, pp.489 - 502, 2006

3522
Effect of polarization direction on the electric field distribution at the near-field of a tip-on-aperture near-field scanning optical microscope probe

Kim, Jin-Beom; Na, Suck-Joo; Chang, Won-Seok, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS REVIEW PAPERS, v.46, no.8B, pp.5577 - 5581, 2007-08

3523
Effect of pressure drop on performance of hollow-fiber membrane module for gas permeation

Chang, Daejun; Min, Joonho; Oh, Sehern; Moon, Kiho, KOREAN JOURNAL OF CHEMICAL ENGINEERING, v.15, no.4, pp.396 - 403, 1998-07

3524
Effect of printing parameters on gravure patterning with conductive silver ink

Kim, Seung-hwan; Sung, Hyung-Jin, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.25, no.4, 2015-04

3525
Effect of Process Parameters on TSV Formation Using Deep Reactive Ion Etching

Kim, Kwang-Seok; Lee, Young-Chul; Ahn, Jee-Hyuk; Song, Jun Yeob; Yoo, Choong D.; Jung, Seung-Boo, KOREAN JOURNAL OF METALS AND MATERIALS, v.48, no.11, pp.1028 - 1034, 2010-11

3526
Effect of processing parameters of the continuous wet spinning system on the crystal phase of PVDF fibers

Jeong, Kun; Kim, Da Hye; Chung, Yong Sik; Hwang, Sang Kyun; Hwang, Hui Yun; Kim, Seong Su, JOURNAL OF APPLIED POLYMER SCIENCE, v.135, no.3, 2018-01

3527
Effect of processing routes in a multi-pass continuous hybrid process on mechanical properties, microstructure, and texture evolutions of low-carbon steel wires

Hwang, Sun Kwang; Baek, Hyun Moo; Joo, HoSeon; Im, Yong-Taek, METALS AND MATERIALS INTERNATIONAL, v.21, no.2, pp.391 - 401, 2015-03

3528
Effect of pulse tube volume on dynamics of linear compressor and cooling performance in Stirling-type pulse tube refrigerator

Ko, Junseok; Jeong, Sangkwon; Ki, Taekyoung, CRYOGENICS, v.50, pp.1 - 7, 2010-01

3529
Effect of pulsing parameters on drop transfer dynamics and heat transfer behavior in pulsed gas metal arc welding

Zhao, Yangyang; Lee, Phill-Seung; Chung, Hyun, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.129, pp.1110 - 1122, 2019-02

3530
Effect of reduced cutaneous cues on motion perception and postural control

Yi, Yong-Woo; Park, Su-Kyung, EXPERIMENTAL BRAIN RESEARCH, v.195, no.3, pp.361 - 369, 2009-05

3531
Effect of reentrant cavities on the thermal performance of a pulsating heat pipe

Kim, Woo Kyoung; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.133, pp.61 - 69, 2018-03

3532
Effect of sensor proximity over the non-conformal hologram plane in the near-field acoustical holography based on the inverse boundary element method

Oey, Agustinus; Jang, Hae-Won; Ih, Jeong-Guon, JOURNAL OF SOUND AND VIBRATION, v.329, no.11, pp.2083 - 2098, 2010-05

3533
EFFECT OF SHIELDING GAS-PRESSURE IN LASER CUTTING OF SHEET METALS

Na, Suck-Joo; YANG, YS; KOO, HM; KIM, TK, JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, v.111, no.3, pp.314 - 318, 1989-07

3534
Effect of size and orientation on stability of dislocation networks upon torsion loading and unloading in FCC metallic micropillars

Gravell, J. D.; Lee, S.; Ryu, Seunghwa; Ryu, I, ACTA MATERIALIA, v.214, 2021-08

3535
Effect of solvent and PVP on electrode conductivity in laser-induced reduction process

Lee, Hu Seung; Yang, Min-Yang, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, v.119, no.1, pp.317 - 323, 2015-04

3536
Effect of spanwise-varying local forcing on turbulent separated flow over a backward-facing step

Chun, S; Lee, I; Sung, Hyung Jin, EXPERIMENTS IN FLUIDS, v.26, pp.437 - 440, 1999

3537
Effect of Stain Rate on Microstructure Evolution and Compressive Deformation Behavior of High-Strength Aluminum Coating Materials Fabricated by the Kinetic Spray Process

Kim, Kyu-Sik; Lee, Changhee; Huh, Hoon; Lee, Kee-Ahn, MATERIALS TRANSACTIONS, v.56, no.4, pp.605 - 609, 2015

3538
Effect of Stator Slotting in the Magnetic Field Distribution of Linear Brushless Permanent Magnet Motor

Myung-Jin Chung; M. G. Lee; S. Q. Lee; Dae-Gab Gweon, JOURNAL OF MAGNETICS, v.6, no.3, pp.101 - 107, 2001-09

3539
Effect of Strain Gradient on Elastic and Plastic Size Dependency in Polycrystalline Copper

Choi, Jae-Hoon; Ryu, Hyemin; Lim, Kwang-Hyeok; Kim, Ji-Young; Kim, Hojang; Sim, Gi-Dong, INTERNATIONAL JOURNAL OF PLASTICITY, v.171, 2023-12

3540
Effect of Strain Localization on the Mechanical Properties from Nonuniform Grain Size Distribution of Ultralow Carbon Steel

Kang, Chun Gu; Yoon, Jeong Whan, STEEL RESEARCH INTERNATIONAL, v.94, no.2, 2023-02

rss_1.0 rss_2.0 atom_1.0