Showing results 2641 to 2700 of 12430
Design and analysis of compact work-recovery phase shifter for pulse tube refrigerator Ki, Tae-Kyung; Jeong, Sang-Kwon, CRYOGENICS, v.52, no.2-3, pp.105 - 110, 2012-02 |
Design and analysis of feeder mechanism for buckling prevention in robotic catheterization Baek, Hyunwoo; Cheon, Byungsik; You, Jae Min; Kwon, Dong-Soo, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, v.9, no.4, pp.1467 - 1481, 2022-08 |
Design and Analysis of Force-Sensor-Less Power-Assist Control Oh, Sehoon; Kong, Kyoungchul; Hori, Yoichi, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.61, no.2, pp.985 - 993, 2014-02 |
Design and Analysis of High-Stiffness Hyperredundant Manipulator With Sigma-Shaped Wire Path and Rolling Joints You, Jae Min; Kim, Hansoul; Kim, Joonhwan; Kwon, Dong-Soo, IEEE ROBOTICS AND AUTOMATION LETTERS, v.6, no.4, pp.7357 - 7364, 2021-10 |
Design and analysis of highly effective pulse tube engine Ki, Tae-Kyung; Jeong, Sang-Kwon, APPLIED THERMAL ENGINEERING, v.53, no.1, pp.31 - 36, 2013-04 |
Design and analysis of hollow section extrusion of the underframe part of a railroad vehicle using mismatching refinement with domain decomposition Park, K; Lee, YK; Yang, Dong-Yol; Lee, DH, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.215, no.3, pp.383 - 394, 2001 |
Design and analysis of liquid hydrogen fuel tank for heavy duty truck Choi, Younseok; Kim, Jungwoog; Park, Seungyup; Park, Hyunjun; Chang, Daejun, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.47, no.32, pp.14687 - 14702, 2022-04 |
Design and analysis of liquid hydrogen-fueled hybrid ship propulsion system with dynamic simulation Jung, Wongwan; Choi, Minsoo; Jeong, Jinyeong; Lee, Jinkwang; Chang, Daejun, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.50, pp.951 - 967, 2024-01 |
Design and analysis of multi-color confocal microscopy with a wavelength scanning detector Do, Duk-Ho; Chun, Wan-Hee; Gweon, Dae-Gab, REVIEW OF SCIENTIFIC INSTRUMENTS, v.83, no.5, 2012-05 |
Design and Analysis of the Active Dual-Mode Twisting Actuation Mechanism Jeong, Seok Hwan; Shin, Young June; Kim, Kyung-Soo, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.22, no.6, pp.2790 - 2801, 2017-12 |
Design and characterization of a fungal bioaerosol generator using multi-orifice air jets and a rotating substrate Jung, Jae Hee; Lee, Chang Ho; Lee, Jung Eun; Lee, Jun Hyun; Kim, Sang Soo; Lee, Byung Uk, JOURNAL OF AEROSOL SCIENCE, v.40, pp.72 - 80, 2009-01 |
Design and characterization of a photo-sensor based force measurement unit (FMU) Gu, Gwang Min; Shin, Yong Kyun; Son, Jina; Kim, Jung, SENSORS AND ACTUATORS A-PHYSICAL, v.182, pp.49 - 56, 2012-08 |
Design and Characterization of an Improved Screw-Assisted Rotary Feeding System for Aerosolization of Ultra-Small Quantities of Particulate Solids Lee, Kang-Soo; Jung, Jae-Hee; Keel, Sang-In; Yun, Jin-Han; Kim, Yong-Jin; Lee, Hyung-Keun; Kim, Sang-Soo, AEROSOL SCIENCE AND TECHNOLOGY, v.44, no.7, pp.563 - 569, 2010 |
Design and construction of the KSTAR tokamak Lee, GS; Kwon, M; Doh, CJ; Hong, BG; Kim, K; Cho, MH; Namkung, W; et al, NUCLEAR FUSION, v.41, no.10, pp.1515 - 1523, 2001-10 |
Design and Control of 3 Axis Actuator using Electromagnetic Force Kim, Soohyun, MOVIC, pp.158 - 163, 1996 |
Design and Control of a 6-DOF Active Vibration Isolation System Using a Halbach Magnet Array Kim, Myeong Hyeon; Kim, Hyo Young; Kim, Hyun Chang; Ahn, Dahoon; Gweon, Dae-Gab, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.21, no.4, pp.2185 - 2196, 2016-08 |
Design and control of a disk-type integrated motor-bearing system Han, WS; Lee, Chong-Won; Okada, Y, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.7, no.1, pp.15 - 22, 2002-03 |
Design and control of a nanoprecision XY Theta scanner Choi, Young-Man; Kim, Jung Jae; Kim, Jinwoo; Gweon, Dae-Gab, REVIEW OF SCIENTIFIC INSTRUMENTS, v.79, no.4, 2008-04 |
Design and control of active magnetic bearing system with Lorentz force-type axial actuator Kim, HY; Lee, Chong-Won, MECHATRONICS, v.16, no.1, pp.13 - 20, 2006-02 |
Design and control of an active ankle-knee orthosis inspired by biarticular musculoskeletal structure of the human lower limb Oh, Sehoon; Mohammed, Samer; Kong, Kyoungchul, ROBOTICS AND AUTONOMOUS SYSTEMS, v.75, pp.107 - 117, 2016-01 |
Design and control of an exoskeleton for the elderly and patients Kong, Kyoungchul; Jeon, Doyoung, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.11, no.4, pp.428 - 432, 2006-08 |
Design and control of flexure based XY theta(z) stage Kang, D; Kim, K; Choi, Y; Gweon, Dae-Gab; Lee, S; Lee, M, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.19, no.11, pp.2157 - 2164, 2005-11 |
Design and Control of High Precision 3D Pickup Actuators for Near Field Recording System Lee, Seong-Hun; Gweon, Dae-Gab, IEEE TRANSACTIONS ON CONSUMER ELECTRONICS, v.54, no.4, pp.1977 - 1980, 2008-11 |
Design and Control of Hybrid-type Three-pole Active Magnetic Bearings Using Redundant Coordinates Park, Sang-Hyun; Lee, Chong-Won, JOURNAL OF VIBRATION AND CONTROL, v.16, no.4, pp.601 - 614, 2010-04 |
Design and control of robot manipulator with a distributed actuation mechanism Kim, Sung-Hwan; Shin, Young-June; Kim, Kyung-Soo; Kim, Soo-Hyun, MECHATRONICS, v.24, no.8, pp.1223 - 1230, 2014-12 |
Design and Control of the Compact Cable-driven Series Elastic Actuator Module in Soft Wearable Robot for Ankle Assistance Lee, Sumin; Choi, Sanguk; Ko, Chanyoung; Kim, Taeyeon; Kong, Kyoungchul, INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, v.21, no.5, pp.1624 - 1633, 2023-05 |
Design and demonstration of multimodal optical scanning microscopy for confocal and two-photon imaging Chun, Wan-Hee; Do, Duk-Ho; Gweon, Dae-Gab, REVIEW OF SCIENTIFIC INSTRUMENTS, v.84, no.1, 2013-01 |
Design and Development of an Emotional Interaction Robot, Mung Kim, EH; Kwak, SS; Hyun, KH; Kim, Soohyun; Kwak, YK, ADVANCED ROBOTICS, v.23, no.6, pp.767 - 784, 2009 |
Design and engineering of organ-on-a-chip Cho, Sujin; Lee, Sumi; Ahn, Song Ih, BIOMEDICAL ENGINEERING LETTERS, v.13, no.2, 2023-05 |
Design and Evaluation of a Novel Experimental Setup for Upper Limb Intermuscular Coordination Studies![]() Park, Jeongho; Shin, Joon-Ho; Lee, Hangil; Park, Chan-Beom; Roh, Jinsook; Park, Hyung-Soon, FRONTIERS IN NEUROROBOTICS, v.13, 2019-09 |
Design and evaluation of a slave manipulator with roll-pitch-roll wrist and automatic tool loading mechanism in telerobotic surgery Kim, Ki-Young; Lee, Jung-Ju, INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY, v.8, no.4, pp.421 - 435, 2012-12 |
Design and Evaluation of a Teleoperated Surgical Manipulator with an Additional Degree of Freedom for Laparoscopic Surgery Kim, Ki-Young; Song, Ho-Seok; Park, Suk-Hoon; Lee, Jung-Ju; Yoon, Yong-San, ADVANCED ROBOTICS, v.24, no.12, pp.1695 - 1718, 2010-09 |
Design and Evaluation of Enhanced Mock Circulatory Platform Simulating Cardiovascular Physiology for Medical Palpation Training![]() Jeong, Jae-Hak; Kim, Young-Min; Lee, Bomi; Hong, Junki; Kim, Jaeuk; Woo, Sam-Yong; Yang, Tae-Heon; et al, APPLIED SCIENCES-BASEL, v.10, no.16, pp.5433, 2020-08 |
Design and Evaluation of Passive Shoulder Joint Tracking Module for Upper-Limb Rehabilitation Robots![]() Lee, Kyoung-Soub; Park, Jeongho; Beom, Jaewon; Park, Hyung-Soon, FRONTIERS IN NEUROROBOTICS, v.12, 2018-07 |
Design and Evaluation of the Unmanned Technology Research Center Exoskeleton Implementing the Precedence Walking Assistance Mechanism Cha, Dowan; Oh, Sung Nam; Lee, Hee Hwan; Kim, Kyung-Soo; Il Kim, Kab; Kim, Soohyun, JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, v.10, no.6, pp.2376 - 2383, 2015-11 |
Design and evaluation of two dimensional metrological atomic force microscope using a planar nanoscanner Lee D.-Y.; Kim D.-M.; Gweon, Dae-Gab, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, v.45, no.3B, pp.2124 - 2127, 2006 |
Design and experimental implementation of longitudinal control for a platoon of automated vehicles Rajamani, R; Choi, Seibum B; Law, BK; Hedrick, JK; Prohaska, R; Kretz, P, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, v.122, no.3, pp.470 - 476, 2000-09 |
Design and experimental investigation of composite squirrel cage rotor with temperature effects Kim, JM; Lee, Dai Gil; Chang, SH; Oh, SH; Jeon, HS, COMPOSITE STRUCTURES, v.57, no.1-4, pp.337 - 344, 2002-09 |
DESIGN AND EXPERIMENTAL VALIDATION OF A CONTROL SYSTEM FOR DYNAMIC POSITIONING OF A SHUTTLE TANKER Kim, Young-Shik; Hong, Jang-Pyo; Kim, Yun-Ho; Sung, Hong-Gun; Kim, Jinwhan, TRANSACTIONS OF FAMENA, v.45, no.3, pp.63 - 85, 2021-12 |
Design and fabrication of a flexural plate wave accelerometer Lee, J.S.; Kim, Y.C.; Lee, W.S.; Lee, Seung Seob, KEY ENGINEERING MATERIALS, v.326-328 I, no.0, pp.241 - 244, 2006 |
Design and fabrication of a lorentz force driven micro indenter Hong, J.S.; Hong, J.W.; Song, S.; Shin, Jennifer Hyunjong, JOURNAL OF BIOMECHANICAL SCIENCE AND ENGINEERING, v.6, no.3, pp.183 - 190, 2011-02 |
Design and Fabrication of a Multi-modal Confocal Endo-Microscope for Biomedical Imaging Kim, Young-Duk; Ahn, Myoung-Ki; Gweon, Dae-Gab, JOURNAL OF THE OPTICAL SOCIETY OF KOREA, v.15, no.3, pp.300 - 304, 2011-09 |
Design and fabrication of an optical probe with a phase filter for extended depth of focus Xing, Jingchao; Kim, Junyoung; Yoo, Hongki, OPTICS EXPRESS, v.24, no.2, pp.1037 - 1044, 2016-01 |
Design and fabrication of planar multilayer structures with coherent thermal emission characteristics Lee, Bong Jae; Zhang, Z. M., JOURNAL OF APPLIED PHYSICS, v.100, no.6, 2006-09 |
Design and finite volume evaluation of a counterflow recuperative spiral heat exchanger for additive manufacturing Busch, Bastian; Caughley, Alan; Glasson, Neil; Badcock, Rodney A; Weijers, Hubertus W; Lumsden, Grant; Gschwendtner, Michael; et al, CRYOGENICS, v.127, 2022-10 |
Design and Implementation of a Novel Interior Permanent Magnet Bearingless Slice Motor Weinreb, Benjamin S.; Noh, Minkyun; Fyler, Donald C.; Trumper, David L., IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, v.57, no.6, pp.6774 - 6782, 2021-11 |
Design and locomotion control of a hydraulic lower extremity exoskeleton for mobility augmentation Kim, Hong Chul; Shin, Young June; Kim, Jung, MECHATRONICS, v.46, pp.32 - 45, 2017-10 |
Design and manufacture of a carbon fiber epoxy rotating boring bar Lee, Dai Gil; Hwang, HY; Kim, JK, COMPOSITE STRUCTURES, v.60, no.1, pp.115 - 124, 2003-04 |
Design and manufacture of a three-axis ultra-precision CNC grinding machine Kim, HS; Jeong, KS; Lee, Dai Gil, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.71, no.2, pp.258 - 266, 1997 |
Design and manufacture of an aerostatic spindle bearing system with carbon fiber-epoxy composites Lee, Dai Gil; Choi, JK, JOURNAL OF COMPOSITE MATERIALS, v.34, no.14, pp.1150 - 1175, 2000 |
Design and manufacture of an automotive hybrid aluminum/composite drive shaft Lee, Dai Gil; Kim, HS; Kim, JW; Kim, JK, COMPOSITE STRUCTURES, v.63, no.1, pp.87 - 99, 2004-01 |
Design and manufacture of composite high speed machine tool structures Lee, DG; Lee, Dai Gil; Kim, HS; Kim, JM, COMPOSITES SCIENCE AND TECHNOLOGY, v.64, no.10-11, pp.1523 - 1530, 2004-08 |
Design and manufacture of hybrid polymer concrete bed for high-speed CNC milling machine Suh J.D.; Lee, Dai Gil, INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, v.4, no.2, pp.113 - 121, 2008-06 |
Design and manufacture of stainless steel/carbon epoxy hybrid shaft for cleaning large LCD glass panels Kim, HS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.80, no.2, pp.279 - 289, 2007-09 |
DESIGN AND MANUFACTURE OF THE COMPOSITE FLEXSPLINE OF A HARMONIC DRIVE WITH ADHESIVE JOINING OH, HS; JEONG, KS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.28, no.3, pp.307 - 314, 1994-01 |
Design and Modeling of a Clutch Actuator System With Self-Energizing Mechanism Kim, Jin-Sung; Choi, Seibum B, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.16, no.5, pp.953 - 966, 2011-10 |
Design and modeling of semi-active squeeze film dampers using magneto-rheological fluids Kim, Keun-Joo; Lee, Chong-Won; Koo, Jeong-Hoi, SMART MATERIALS & STRUCTURES, v.17, no.3, 2008-06 |
Design and optimisation of one-port RF MEMS resonators and related integrated circuits using ANN-based macromodelling approach Lee, Y.; Park, Yong-Hwa; Niu, Feng; Filipovic, Dejan, IEE PROCEEDINGS: CIRCUITS, DEVICES AND SYSTEMS, v.153, no.5, pp.480 - 488, 2006-10 |
Design and optimisation of variable geometry single-tracked vehicle for climbing stairs Park, Dong Il; Lim, Sung-Kyun; Kwak, Yoon Keun, INTERNATIONAL JOURNAL OF VEHICLE DESIGN, v.43, no.1-4, pp.221 - 236, 2007 |
Design and Optimization of Long Stroke Planar Motion Maglev Stage using Copper Strip Array Woo, Siwoong; Gweon, Dae-Gab, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.16, no.3, pp.479 - 485, 2015-03 |
Discover