Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 4201 to 4260 of 12331
| Experimental Study of AC Losses in a Rutherford Type Cable Jeong, Sangkwon, ADVANCES IN CRYOGENIC ENGINEERING, v.42, no.0, pp.1209 - 1216, 1996-01 |
| Experimental Study of acoustic characteristics of expansion chamber with mean flow Kim, Yang-Hann; Kim, S.H.; Lim, B.D.; Kwak , Y.K., KSME INTERNATIONAL JOURNAL, v.2, no.2, pp.125 - 132, 1988-09 |
| Experimental study of effect of CO2 addition on oxy-fuel combustion in triple concentric multi-jet burner Kim, S.H.; Park, J.H.; Lee, D.K.; Shin, Hyun Dong, TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS, v.34, no.4, pp.409 - 416, 2010-04 |
| Experimental Study of Effects of Axi-asymmetric Combustion Air Supply in Horizontally Oil-fired Burner and Furnace Go, YG; Choi, Sangmin; Yang, W, ENERGY & FUELS, v.23, no.8, pp.3899 - 3908, 2009-08 |
| An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints Im, Y.T.; Lee, D.G.; Kim, K.S., Journal of Adhesion, Vol.35, No.1, pp.39-53, 1991-04 |
| Experimental study of film flow and heat/mass transfer in LiBr-H2O solution flowing over a cooled horizontal tube Seol, SS; Lee, Sang Yong, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, v.32, pp.445 - 453, 2005-02 |
| Experimental study of material behavior of AP-HTPB base composite solid propellant Kim, Shinhoe; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.33, no.7, pp.3355 - 3361, 2019-07 |
| Experimental study of miniaturized tip test Chauviere, P; Jung, KH; Kim, DK; Lee, HC; Kang, SH; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.22, no.5, pp.924 - 930, 2008-05 |
| Experimental study of surface integrity during end milling of Al/SiC particulate metal-matrix composites Reddy, N. Suresh Kumar; Kwang-Sup, Shin; Yang, Min-Yang, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.201, no.1-3, pp.574 - 579, 2008-05 |
| EXPERIMENTAL STUDY OF SURFACE IRREGULARITIES OF LOW CARBON STEEL IN HOT BAR ROLLING Lee, Ho-Won; Awais, Muhammad; Im, Yong-Taek; Lee, You-Hwan; Son, Il-Heon; Lee, Duk-Lak, STEEL RESEARCH INTERNATIONAL, v.79, no.2, pp.65 - 72, 2008-09 |
| Experimental study of three-dimensional vortex structures in translating and rotating plates Kim, Daegyoum; Gharib, M., EXPERIMENTS IN FLUIDS, v.49, no.1, pp.329 - 339, 2010-07 |
| Experimental study on a criterion for normal operation of pulsating heat pipes in a horizontal orientation Jun, Soohwan; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.137, pp.1064 - 1075, 2019-07 |
| Experimental study on heating type pressurization of liquid applicable to LNG fueled shipping Seo, Suwon; Jang, Wonhee; Kim, Juneyoung; Ryu, Jiheon; Chang, Daejun, APPLIED THERMAL ENGINEERING, v.127, pp.837 - 845, 2017-12 |
| Experimental study on identifying cracks of increasing size using ultrasonic excitation An, Jungeun; Haftka, Raphael T.; Kim, Nam H.; Yuan, Fuh-Gwo; Kwak, Byung Man; Sohn, Hoon; Yeum, Chul Min, STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, v.11, no.1, pp.95 - 108, 2012-01 |
| An Experimental Study on Incremental Roll Forming Process for Manufacturing Double Curved Ship Hull Plat D.S., Shim; C.G., Jung; D.Y., Seong; D.Y., Yang; M.S., Han; S.W., Chung, KSTP, 2008-01 |
| Experimental study on physical properties of compression molded SMC parts under plane strain condition Kim, KT; Im, Yong-Taek, COMPOSITE STRUCTURES, v.35, no.2, pp.131 - 141, 1996-06 |
| Experimental study on spreading and evaporation of inkjet printed pico-liter droplet on a heated substrate Lim, Taewoong; Han, Sewoon; Chung, Jaewon; Chung, Jin Taek; Ko, Seung Hwan; Grigoropoulos, Costas P., INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.52, no.1-2, pp.431 - 441, 2009-01 |
| Experimental study on squeeze film damping of perforated micromechanical structures oscillating perpendicular to the substrate Kim, Eung-Sam; Han, Ki-Ho; Cho, Young-Ho; Kim, Moon Uhn, SENSORS AND MATERIALS, v.18, no.7, pp.381 - 393, 2006 |
| Experimental study on stable steam condensation in a quenching tank Kim, HY; Bae, YY; Song, CH; Park, JK; Choi, Sangmin, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.25, no.3, pp.239 - 252, 2001-03 |
| Experimental study on the double-evaporator thermosiphon for cooling HTS (high temperature superconductor) system Lee, Jung-Hyun; Ko, Jun-Seok; Kim, Young-Kwon; Jeong, Sang-Kwon; Sung, Tae-Hyun; Han, Young-Hee; Lee, Jeong-Phil; et al, CRYOGENICS, v.49, no.8, pp.390 - 397, 2009-08 |
| Experimental study on the effect of blade angle on regenerative pump performance Choi, Won-Chul; Yoo, Il-Su; Park, Mu-Ryong; Chung, Myung-Kyoon, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, v.227, no.5, pp.585 - 592, 2013-08 |
| Experimental study on the effect of flame surface area fluctuation on the heat release fluctuation in a premixed bunsen flame Park, J.H.; Lee, D.K.; Shin, Hyun Dong, TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS, v.34, no.2, pp.197 - 202, 2010-02 |
| Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engine Park, Youngsoo; Bae, Choongsik, APPLIED ENERGY, v.133, pp.308 - 316, 2014-11 |
| Experimental study on the life prediction of servo motors through model-based system degradation assessment and accelerated degradation testing Park, Bumsoo; Jeong, Haedong; Huh, Hyunseuk; Kim, Minsub; Lee, Seungchul, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.32, no.11, pp.5105 - 5110, 2018-11 |
| AN EXPERIMENTAL STUDY ON THE POSITION CONTROL OF AN ELECTROHYDRAULIC SERVO SYSTEM USING TIME DELAY CONTROL Chin, Sung-Mu; Lee, Chung-Oh; Chang, Pyung H., Control Engineering Practice, Vol.2, No.1, pp.41-48, 1994-02 |
| AN EXPERIMENTAL STUDY ON THE POSITION CONTROL OF AN ELECTROHYDRAULIC SERVO SYSTEM USING TIME DELAY CONTROL Chin, Sung-Mu; Lee, Chung-Oh; Chang, Pyung Hun, Control Engineering Practice, Vol.2, No.1, pp.41-48, 1994 |
| Experimental study on the regenerator under actual operating conditions Jeong, Sangkwon, ADVANCES IN CRYOGENIC ENGINEERING, v.47, no.0, pp.977 - 984, 2002-07 |
| Experimental study on the spray characteristics in the spray drying absorber Yang, HM; Kim, Sang Soo, ENVIRONMENTAL SCIENCE TECHNOLOGY, v.34, no.21, pp.4582 - 4586, 2000-11 |
| Experimental study on the vortex-induced vibration of towed pipes Hong, S; Choi, YR; Park, JB; Park, YK; Kim, Yang-Hann, JOURNAL OF SOUND AND VIBRATION, v.249, no.4, pp.649 - 661, 2002-01 |
| Experimental study on tribrachial flames in narrow channels with small fuel concentration gradients Cho, Sang Moon; Lee, Min Jung; Kim, Nam Il, EXPERIMENTAL THERMAL AND FLUID SCIENCE, v.34, no.8, pp.1432 - 1438, 2010-11 |
| Experimental techniques for fatigue reliability of BGA solder bumps in electronic packaging Lee, Soon-Bok; Park, TS; Ham, SJ, JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, v.43, no.4, pp.400 - 407, 2000-10 |
| Experimental validation of heat switch capability of cryogenic loop heat pipe Cho, Hyokjin; Jin, Lingxue; Kim, Seokho; Jeong, Sangkwon, CRYOGENICS, v.121, 2022-01 |
| Experimental validation of vibration damping using an Archimedean spiral acoustic black hole Park, Seongmin; Kim, Minkyu; Jeon, Wonju, JOURNAL OF SOUND AND VIBRATION, v.459, pp.114838, 2019-10 |
| Experimental verification of autoalignment for focusing unit of near field recording system: Neural network approach Yoon, H.-K.; Gweon, Dae-Gab; Lee, J.-H.; Jeong, J., JAPANESE JOURNAL OF APPLIED PHYSICS, v.45, no.2 B, pp.1357 - 1362, 2006-02 |
| Experimental Verification of Fault Identification for Overactuated System With a Scaled-Down Electric Vehicle Park, Jinseong; Park, Youngjin, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.21, no.4, pp.1037 - 1045, 2020-08 |
| EXPERIMENTAL-OBSERVATIONS ON FLOW CHARACTERISTICS IN AN OPEN 2-PHASE NATURAL CIRCULATION LOOP Kyung, I.S.; Lee, Sang Yong, NUCLEAR ENGINEERING AND DESIGN, v.150, no.1, pp.163 - 176, 1994 |
| EXPERIMENTAL-STUDY OF PARTICLE DEPOSITION ONTO A CIRCULAR-CYLINDER IN HIGH-TEMPERATURE PARTICLE-LADEN FLOWS Kim, YJ; Kim, Sang Soo, EXPERIMENTAL THERMAL AND FLUID SCIENCE, v.5, no.1, pp.116 - 123, 1992-01 |
| EXPERIMENTAL-STUDY OF THERMALLY STRATIFIED UNSTEADY-FLOW BY NMR-CT LEE, SJ; Chung, Myung Kyoon; MUN, CW; CHO, ZH, EXPERIMENTS IN FLUIDS, v.5, no.4, pp.273 - 281, 1987 |
| EXPERIMENTAL-STUDY OF TURBULENT AXISYMMETRICAL CAVITY FLOW LEE, DH; Sung, Hyung Jin, EXPERIMENTS IN FLUIDS, v.17, no.4, pp.272 - 281, 1994-08 |
| EXPERIMENTAL-STUDY OF UNIFORM-SHEAR FLOW PAST A ROTATING CYLINDER Sung, Hyung Jin; CHUN, CK; HYUN, JM, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, v.117, no.1, pp.62 - 67, 1995-03 |
| EXPERIMENTAL-STUDY OF VAPOR-DEPOSITION AND DEW POINTS IN COMBUSTION GASES BY INTERFEROMETRIC-TECHNIQUE SONG, YH; HER, JY; Kim, Sang Soo, JSME INTERNATIONAL JOURNAL SERIES II-FLUIDS ENGINEERING HEAT TRANSFER POWER COMBUSTION THERMOPHYSICAL PROPERTIES, v.31, no.3, pp.559 - 564, 1988-08 |
| EXPERIMENTAL-STUDY ON MASS-TRANSFER FROM A CIRCULAR-CYLINDER IN PULSATING FLOW Sung, Hyung Jin; HWANG, KS; Hyun, Jae Min, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.37, no.15, pp.2203 - 2210, 1994-10 |
| EXPERIMENTAL-VERIFICATION OF SUPERPLASTIC SHEET-METAL FORMING ANALYSIS BY THE FINITE-ELEMENT METHOD Huh, Hoon; HAN, SS; LEE, JS; HONG, SS, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.49, no.3-4, pp.355 - 369, 1995-02 |
| Experiments on formation of the adiabatic shear band in sheet metal Lim, J; Huh, Hoon, METALS AND MATERIALS INTERNATIONAL, v.11, no.1, pp.11 - 18, 2005-02 |
| Experiments on heat transfer enhancement from a heated square cylinder in a pulsating channel flow Ji, Tae Ho; Kim, Seo Young; Hyun, Jae Min, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.51, no.5-6, pp.1130 - 1138, 2008-03 |
| Experiments on non-resonant sloshing in a rectangular tank with large amplitude lateral oscillation Ji, Young-Moo; Shin, Young-Sup; Park, Jun-Sang; Hyun, Jae-Min, OCEAN ENGINEERING, v.50, pp.10 - 22, 2012-08 |
| Experiments on the transient effect of evolving jet diffusion flames Lee, EJ; Oh, KC; Shin, Hyun Dong, PROCEEDINGS OF THE COMBUSTION INSTITUTE, v.28, pp.2079 - 2084, 2000 |
| Experiments on vision guided docking of an autonomous underwater vehicle using one camera Park, Jin-Yeong; Jun, Bong-huan; Lee, Pan-mook; Oh, Jun-Ho, OCEAN ENGINEERING, v.36, no.1, pp.48 - 61, 2009-01 |
| EXPERT CURE SYSTEM FOR THE CARBON-FIBER EPOXY COMPOSITE-MATERIALS CHOI, JH; Lee, Dai Gil, JOURNAL OF COMPOSITE MATERIALS, v.29, no.9, pp.1181 - 1200, 1995 |
| Expert System for Multi-Stage Cold Forging Process Sequence Design Kim, Hong Seok; Yoon, Sung Man; Im, Yong Taek, TRANSACTIONS- NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, v.22, pp.1 - 6, 1994-05 |
| Expert system for multi-stage cold-forging process design with a re-designing algorithm Kim, Hong-Seo; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.54, no.1-4, pp.271 - 285, 1995-10 |
| Expert system for the process sequence design of a ball stud Song, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.90Special, no.SI, pp.72 - 78, 1999-05 |
Explaining Evaporation-Triggered Wetting Transition Using Local Force Balance Model and Contact Line-Fraction Annavarapu, Rama Kishore; Kim, Sanha; Wang, Minghui; Hart, A. John; Sojoudi, Hossein, SCIENTIFIC REPORTS, v.9, no.1, 2019-01 |
| Explicit code를 이용한 Lower control arm의 스탬핑 해석 하원필; 임세영, 한국자동차공학회 논문집, v.2, no.4, pp.50 - 58, 1994-07 |
| Explicit structural topology optimization using boundary element method-based moving morphable void approach Zhang, Weisheng; Jiang, Qingqing; Feng, Weizhe; Youn, Sung-Kie; Guo, Xu, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.122, no.21, pp.6155 - 6179, 2021-11 |
| Explicit topology optimization for graded lattice flexoelectric nanostructures via ersatz material model Zhang, Weisheng; Meng, Yao; Yan, Xiaoye; Shao, Li-Hua; Yan, Dongze; Liu, Chang; Youn, Sung-Kie; et al, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.124, no.17, pp.3852 - 3874, 2023-09 |
| Explicit topology optimization using IGA-based moving morphable void (MMV) approach Zhang, Weisheng; Li, Dingding; Kang, Pilseong; Guo, Xu; Youn, Sung-Kie, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.360, 2020-03 |
| Explicitly-adaptive time delay estimation for wide-band signals Kim, DH; Park, Youngjin, IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES, v.E88A, no.11, pp.3214 - 3217, 2005-11 |
| Exploitation of the Impedance and Characteristics of the Human Arm in the Design of Haptic Interfaces Woo, Hyun Soo; Lee, Doo Yong, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.58, no.8, pp.3221 - 3233, 2011-08 |
| Exploiting multi-layer graph factorization for multi-attributed graph matching Park, Han-Mu; Yoon, Kuk-Jin, PATTERN RECOGNITION LETTERS, v.127, pp.85 - 93, 2019-11 |
Discover
Open Access
Date issued
- 4,140 2020 - 2024
- 12,347 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989