An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints
In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm.
- Publisher
- Taylor & Francis
- Issue Date
- 1991-04
- Keywords
Manufacturing technology; adherend surface roughness; surface preparation; bonding process; adhesive thickness; torsional strength
- Citation
Journal of Adhesion, Vol.35, No.1, pp.39-53
- ISSN
- 0021-8464
- Appears in Collection
- ME-Journal Papers(저널논문)
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.