121 | (A) microcomputer based industrial eye for positioning and centering of holes = 원공 중심을 찾아가는 마이크로 컴퓨터에 의한 산업눈link Ha, Sung-Do; 하성도; et al, 한국과학기술원, 1985 |
122 | (A) new 3 d.o.f cable-suspended haptic interface = 케이블을 이용한 새로운 3 자유도 햅틱 인터페이스link Woo, Hyo-Jun; 우효준; et al, 한국과학기술원, 2009 |
123 | (A) new approach to chip curl formation in orthogonal cutting = 이차원 절삭에서의 칩 유동에 관한 해석link Ryu, Kye-Hyeon; 류계현; et al, 한국과학기술원, 1980 |
124 | (A) new guidance law for homing missiles = 호밍미사일의 새로운 유도방식에 관한 연구link Kim, Young-Seog; 김영석; et al, 한국과학기술원, 1983 |
125 | (A) new method for image separation from overlapped image on the two-layered PCB = 양면 실장 기판의 X선 중첩 영상의 분리에 관한 연구link An, Jin-Ung; 안진웅; et al, 한국과학기술원, 1997 |
126 | (A) New Strategy for the synthesis and integration of diverse nanostructures based on local thermal energy and their gas sensing applications = 국부적 열에너지 기반 다종 나노구조물의 합성과 집적 및 가스 센서에의 응용link Kim, Dong-Hwan; 김동환; et al, 한국과학기술원, 2012 |
127 | (A) nodal density based topology optimization with continuous boundary = 연속적인 경계를 가지는 절점밀도 기반 위상 최적화link Lee, Jinhwan; Lee, Phill-Seung; et al, 한국과학기술원, 2021 |
128 | (A) nodal-density-based model for reliability-based topology optimization under geometric uncertainty = 기하학적 불확실성 하에서 신뢰도 기반 위상최적설계를 위한 절점 밀도 기반 모델 연구link Kim, Jonghyun; Lee, Ik Jin; et al, 한국과학기술원, 2019 |
129 | (A) novel method of modelling effects of magnetic saturation in permanent magnet synchronous motor = 영구자석 동기 모터 내 자기 포화 효과의 모델링 방법link Stos, Tomasz Piotr; Kim, Kyung-Soo; et al, 한국과학기술원, 2016 |
130 | (A) numerical model for reflood phase of a LOCA in a PWR = 가압 경수형 원자로에서의 냉각수 상실 사고시 재관수 단계에 대한 수치적 모델link Jeung, Eun-Soo; 정은수; et al, 한국과학기술원, 1983 |
131 | (A) numerical study on high temperature-induced thermal runaway behavior of a prismatic li-ion battery = 고온에 의한 각주형 리튬이온전지의 열폭주 현상에 대한 수치해석link Cho, Hyun-Jun; 조현준; et al, 한국과학기술원, 2010 |
132 | (A) Part-based approach for real-world point cloud completion = 실제 점구름 완성을 위한 부분 기반 접근 방식link Yang, Yunseo; 양윤서; et al, 한국과학기술원, 2024 |
133 | (A) physical human-machine interaction using surface electromyography of the upper limb = 상지부의 표면 근전도를 이용한 물리적 인간-기계 상호작용에 관한 연구link Kwon, Sun-Cheol; 권순철; et al, 한국과학기술원, 2009 |
134 | (A) pneumatic haptic interface for simulation of catheter = 카테터 시뮬레이션을 위한 공압 구동 방식의 햅틱 인터페이스link Hwang, Jihye; 황지혜; et al, 한국과학기술원, 2016 |
135 | (A) research on mechanical reliability of Ag ion ink films on flexible substrates = 플렉서블 기판 위 은 이온 잉크 필름의 기계적 신뢰성 평가에 대한 연구link Choi, Hye Sun; Kim, Taek Soo; et al, 한국과학기술원, 2017 |
136 | (A) simplified model of coal gasifier : a simple kinetic model applied to process simulation = 석탄가스화기 단순화 모델링 : 공정해석에 활용 가능한 단순속도반응 기반 모델link Park, Jin-Hoo; 박진후; et al, 한국과학기술원, 2009 |
137 | (A) soft somesthetic robotic finger based on 3D electrical resistance tomography and hydrogel = 3차원 전기 저항 단층촬영기법 및 하이드로겔 기반의 유연 체성감각 센싱 로봇 손가락 개발link Cho, Jun-Hwi; Kim, Jung; et al, 한국과학기술원, 2022 |
138 | (A) soft variable stiffness band based on electroadhesive clutch for wearable robot = 외골격 장치를 위한 정전기 클러치 기반 소프트 가변 강성 밴드 개발link Choi, Junhwan; Kim, Jung; et al, 한국과학기술원, 2022 |
139 | (A) sound-absorbing metasurface using Helmholtz resonators having cavities partitioned non-uniformly by membranes = 얇은 막에 의해 비균일하게 분할된 헬름홀츠 공명기들을 이용한 흡음 메타표면link Choi, Eunji; Jeon, Wonju; et al, 한국과학기술원, 2021 |
140 | (A) speech separation from multi-speaker dialogues under reverberant environment based on enhanced interaural coherence = 잔향이 있는 다중 화자 환경에서의 두 개의 마이크로폰을 이용한 코히런스 기반 음성 분리 기법link Kim, Seong-Hu; Park, Yong-Hwa; et al, 한국과학기술원, 2019 |
141 | (A) stable treatment of time domain boundary condition in using the finite difference time domain method = 유한 차분 시간영역법에 있어서 시간영역 경계조건의 안정적 사용link Sihar, Indra; Ih, Jeong-Guon; et al, 한국과학기술원, 2010 |
142 | (A) study for determination and prediction of fiber volume fractions in compression molded SMC parts = 압축성형된 SMC 제품의 보강섬유 체적분율 측정 및 예측에 관한 연구link Cheon, Jae-Seung; 천재승; et al, 한국과학기술원, 1997 |
143 | (A) study of an active ankle foot orthosis for stabilization in gait with spasticity = 경직성 보행 안정화를 위한 능동 발목보조기 연구link Kim, Jongwon; Kong, Kyoungchul; et al, 한국과학기술원, 2023 |
144 | (A) study of natural convection in concentric vertical cylinders with heat genetating inner cylinder = 내부 발열 원통물체를 갖는 수직동심 원통형 밀폐공간 내의 자연대류에 관한 연구link Han, Heung-Do; 한흥도; et al, 한국과학기술원, 1986 |
145 | (A) study of natural convection in the horizontal gap between inner square duct and outer circular cylinder = 정방형 단면을 가진 수평 내부관과 외부원관 사이에서의 자연대류 현상에 관한 연구link Won, Young-Ho; 원영호; et al, 한국과학기술원, 1981 |
146 | (A) study of tool wear in electro discharge machining = 방전 가공시의 공구마모에 대한 연구link Park, Jong-Soo; 박종수; et al, 한국과학기술원, 1981 |
147 | (A) study on a driver model for vehicle lateral dynamics = 횡-방향 차량동역학을 위한 운전자 모델에 관한 연구link Moon, Chul-Woo; 문철우; et al, 한국과학기술원, 2008 |
148 | (A) study on designing of 3D-laser forming process for circular sheet metal = 원형 박판의 3차원 레이저 성형을 위한 공정설계에 관한 연구link Nadeem, Qaiser; 나딤, 카이저; et al, 한국과학기술원, 2010 |
149 | (A) study on improvement of tire force estimation by vehicle mass estimation in practical approach = 차량 중량 추정을 통한 타이어 힘 추정 개선에 관한 연구link Ga, Han-Seon; Choi, Seibum; et al, 한국과학기술원, 2017 |
150 | (A) study on iodine stress corrosion cracking of zircaloy-4 tube = 질르칼로이-4 튜브의 요오드 응력부식파괴에 대한 연구link Moon, Kyung-Jin; 문경진; et al, 한국과학기술원, 1978 |
151 | (A) study on motor controller and distributed computing for compensation of mechanical impedance of multi-joint robot systems = 다관절 로봇 시스템의 기계적 임피던스 보상이 가능한 모터 제어장치와 분산 컴퓨팅 제어 연구link Kim, Hyeong-Jun; Kong, Kyoungchul; et al, 한국과학기술원, 2022 |
152 | (A) study on narrowband noise reduction characteristics of acoustic screens in a rectangular duct = 사각 덕트 내 음향 스크린의 협대역 소음 저감 특성에 관한 연구link Rim, Min-Hong; 임민홍; et al, 한국과학기술원, 1998 |
153 | (A) study on natural convection in inclined rectangular cavity of high aspect ratio using F.E.M. = 경사진 직사각형내에서의 자연 대류 현상의 유한 요소법을 이용한 연구link Lee, Yong-Shin; 이용신; et al, 한국과학기술원, 1981 |
154 | (A) study on parameters affecting the structure of the turbulent pane jet = 2차원 난류 평면 제트의 구조에 영향을 주는 인자들에 대한 연구link Kim, Ho-Jong; 김호종; et al, 한국과학기술원, 1983 |
155 | (A) study on performance of absorption heat transformer with process simulation = 프로쎄스 씨뮬레이션에 의한 제 2종 흡수식 열펌프에 관한 연구link Cho, Seung-Yon; 조승연; et al, 한국과학기술원, 1986 |
156 | (A) study on permeability prediction of fiber-reinforced composite materials based on the representative volume element = 대표 체적 요소 기반 섬유강화 복합재료 투수 계수 예측에 관한 연구link Lee, Hugon; Kim, Seong Su; et al, 한국과학기술원, 2022 |
157 | (A) study on protection of brittle layers in rollable display structures = 롤러블 디스플레이 구조 내 취성 층의 보호에 관한 연구link Ma, Boo Soo; Kim, Taek-Soo; et al, 한국과학기술원, 2018 |
158 | (A) study on the acoustic black hole structure with varying width = 폭이 변하는 음향 블랙홀 구조에 대한 연구link Jeong, Jae-Hak; Ih, Jeong-Guon; et al, 한국과학기술원, 2019 |
159 | (A) study on the adaptive control system for turning process using axial force = 이송력을 이용한 선삭작업의 적용 제어 시스템에 관한 연구link Lee, Soo-Han; 이수한; et al, 한국과학기술원, 1980 |
160 | (A) study on the adaptive control system for turning process using cutting temperature = 절삭 공구 온도를 이용한 선삭작업의 적응제어 시스템link Kim, Jong-Shik; 김종식; et al, 한국과학기술원, 1979 |
161 | (A) study on the characteristics of parametric speakers in near field = 파라메트릭 스피커의 근접음장 특성에 관한 연구link Ju, Hyeong-Sick; 주형식; et al, 한국과학기술원, 2006 |
162 | (A) study on the development of robot hand with under-actuated fingers and control of grasping control = 불충분 구동 손가락을 갖는 로봇 손의 개발 및 악력의 제어에 관한 연구link Trinh, Minh Coung; Oh, Jun-Ho; et al, 한국과학기술원, 2007 |
163 | (A) study on the feedback controller design of mold filling process for plastic injection molding machine = 플라스틱 사출기의 사출과정을 위한 피드백 콘트롤러 디자인link Shin, Jin-Woo; 신진우; et al, 한국과학기술원, 1984 |
164 | (A) Study on the improvement of fracture toughness of stainless steel adhesive joints at cryogenic temperature = 스테인리스 강철 접착조인트의 극저온 파괴인성 향상에 관한 연구link Hwang, Yun-Jeong; 황윤정; et al, 한국과학기술원, 2012 |
165 | (A) study on the measurement of the dynamic cutting force coefficients = 동절삭력 계수의 측정에 관한 연구link Park, Byoung-Ho; 박병호; et al, 한국과학기술원, 1985 |
166 | (A) study on the new extrusion-forging processes = 새로운 압출-단조 공정에 관한 연구link Yang, Dong-Yol; 양동열; et al, 한국과학기술원, 1975 |
167 | (A) study on the residual thickness evaluation based on shape measuring for a furnace refractory material = 용광로 내화 재료 형상 측정에 의한 잔여 두께 평가에 대한 연구link Oussama, Anguek,; 우사마, 언각; et al, 한국과학기술원, 2016 |
168 | (A) study on the sound pressure distribution in a duct with flow = 도관내에 공기의 흐름이 있을 경우, 관벽의 음원에 의한 음압 분포에 대한 연구link Lee, Soun-Young; 이순영; et al, 한국과학기술원, 1988 |
169 | (A) study on the thermal characteristics of a double-spiral heat exchanger using a thermo-electric cooler : analysis and experimentation = 열전소자를 이용한 이중 나선형 열교환기의 열적 특성에 관한 수치 및 실험적 연구link Kim, Sung-Won; 김성원; et al, 한국과학기술원, 2002 |
170 | (A) study on the tomographic interpretation of axisymmetric diffusion flame emission = 단층 진단법을 이용한 축대칭 확산 화염 영상의 해석에 관한 연구link Ha, Kwang-Soon; 하광순; et al, 한국과학기술원, 1993 |
171 | (A) study on the tool wear by dynamic data system (DDS) approach = Dynamic Data System (DDS) 방법을 이용한 공구 마멸에 관한 연구link Hwang, Hong-Yeon; 황홍연; et al, 한국과학기술원, 1984 |
172 | (A) study on the torque chracteristics of the composite cocured single lap joint = 복합 재료 동시 경화 조인트의 토크 특성 연구link Lee, Seung-Woo; 이승우; et al, 한국과학기술원, 1996 |
173 | (A) study on the vibration absorber using viscoelastic material = 점탄성 재료를 이용한 진동 흡수기에 대한 연구link Yeo, Tae-In; 여태인; et al, 한국과학기술원, 1984 |
174 | (A) study on thickness optimization of inflatable circular membrane for large optical system = 대구경 광학계의 팽창용 원형 박막 두께 최적화에 관한 연구link Soh, Min-Gwan; 소민관; et al, 한국과학기술원, 2003 |
175 | (A) study on transfer learning of text classification neural network using image data = 이미지 데이터를 이용한 텍스트 분류 모델 전이 학습에 관한 연구link Ohm, TaeWoong; Yang, Minyang; et al, 한국과학기술원, 2018 |
176 | (A) surface-micromachined capacitive microaccelerometer = 자동차에어백용 정전용량형 미소가속도계에 관한 연구link Kim, Jong-Pal; 김종팔; et al, 한국과학기술원, 1997 |
177 | (A) switchable stiffness hydrostatic transmission for safe physical human-robot interaction = 안전한 물리적 인간-로봇 상호작용을 위한 가변 강성 유압 트랜스미션link Park, Sung Bin; Kim, Jung; et al, 한국과학기술원, 2022 |
178 | (A) system for measuring composition and size distribution of atmospheric dust = 대기 중 먼지의 크기 분포 및 성분 측정을 위한 시스템 개발link Seo, Minseok; Kim, Soohyun; et al, 한국과학기술원, 2017 |
179 | (A) theoretical study on room acoustics = 실내 음향에 대한 이론적 연구link Kim, Jeung-Tae; 김정태; et al, 한국과학기술원, 1978 |
180 | (A) tip vortex suppression of a ducted propeller by mass injection = 질량 주입에 의한 덕트 프로펠러의 팁 볼텍스 억제link Choi, Jaeho; Kim, Daegyoum; et al, 한국과학기술원, 2021 |