Showing results 9061 to 9120 of 12455
The dynamic analysis of metal transfer in pulsed current gas metal arc welding Choong Don Yoo, JOURNAL OF PHYSICS D-APPLIED PHYSICS, v.31, no.2, pp.207 - 215, 1998 |
The dynamic modeling and design improvement of a piezoelectric exciter of a touch screen device for efficient tactile feedback Park, Young-Min; Kim, Kwang-joon, SMART MATERIALS STRUCTURES, v.20, no.5, 2011-05 |
The Dynamic Performance Analysis of Foil Journal Bearings Considering Coulomb Friction: Rotating Unbalance Response Lee, Dong-Hyun; Kim, Young-Cheol; Kim, Kyung-Woong, TRIBOLOGY TRANSACTIONS, v.52, no.2, pp.146 - 156, 2009 |
THE DYNAMIC-RESPONSE OF A ROTATING SHAFT SUBJECT TO A MOVING LOAD KATZ, R; Lee, Chong-Won; ULSOY, AG; SCOTT, RA, JOURNAL OF SOUND AND VIBRATION, v.122, no.1, pp.131 - 148, 1988-04 |
The Editorial Chen, Gang; Huang, Wei-Xi; Da Ronch, Andrea; Pecora, Rosario; Kim, Daegyoum, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, v.237, no.18, pp.4077 - 4077, 2023-09 |
The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire Baek, Hyun Moo; Hwang, Sun Kwang; Joo, Ho Seon; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, MATERIALS & DESIGN, v.62, pp.137 - 148, 2014-10 |
The effect of a non-circular drawing sequence on spheroidization of medium carbon steel wires Joo, Ho Seon; Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.216, pp.348 - 356, 2015-02 |
The effect of a periodic absorptive strip arrangement on an interior sound field in a room Park, JB; Grosh, K; Kim, Yang-Hann, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.117, no.2, pp.763 - 770, 2005-02 |
The Effect of a Salinent Wedge on the Motion of a Small Particle in a Viscous Fluid Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.52, no.11, pp.3790 - 3799, 1983 |
The Effect of a Semi-Infinite Plane on the Motion of a Small Particle in a Viscous Fluid Hidenori Hasimoto; Takeshi Miyazaki; Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.52, no.6, pp.1996 - 2003, 1983 |
The effect of abductor muscle and anterior-posterior hip contact load simulation on the in-vitro primary stability of a cementless hip stem Park, Y.; Albert, C.; Yoon, Yong-San; Fernlund, G.; Frei, H.; Oxland, T.R., JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH, v.5, 2010 |
The effect of activated carbon injection rate on the removal of elemental mercury in a particulate collector with fabric filters Choi, HK; Lee, SH; Kim, Sang Soo, FUEL PROCESSING TECHNOLOGY, v.90, pp.107 - 112, 2009-01 |
The Effect of Active Control on Stability Characteristics of Hydrodynamic Journal Bearings With an Axial Groove Rho, B-H; Kim, Kyung-Woong, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, v.216, no.9, pp.939 - 946, 2002-09 |
The Effect of Anisotropic Conductive Films Adhesion on the Bending Reliability of Chip-in-Flex Packages for Wearable Electronics Applications Kim, Ji-Hye; Lee, Tae-Ik; Kim, Taek-Soo; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.7, no.10, pp.1583 - 1591, 2017-10 |
The Effect of Backpack Load Carriage on the Kinetics and Kinematics of Ankle and Knee Joints During Uphill Walking Lee, Jinkyu; Yoon, Yong-Jin; Shin, Choongsoo S., JOURNAL OF APPLIED BIOMECHANICS, v.33, no.6, pp.397 - 405, 2017-12 |
The effect of Coulomb friction on the static performance of foil journal bearings Lee, Dong-Hyun; Kim, Young-Cheol; Kim, Kyung-Woong, TRIBOLOGY INTERNATIONAL, v.43, no.5-6, pp.1065 - 1072, 2010 |
The Effect of Deformation Speed on Frictional Behavior by Tip Test Jung, Ki-Ho; Im, Yong-Taek, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.132, no.3, pp.031801-1 - 031801-6, 2010-07 |
The Effect of EN Ratio and Current on Microstructural and Mechanical Properties of Weld Joined by AC-GMAW on Square Groove Butt Joints Ikram, Adeel; Chung, Hyun, Applied Sciences-Basel, v.7, no.3, 2017-03 |
The effect of grain refinement by multi-pass continuous hybrid process on mechanical properties of low-carbon steel wires Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, CM; Lee, Ho Won, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.7, pp.1398 - 1407, 2014-07 |
The effect of heat treatment on formability of ultra-fine grained AA6061 for bolt manufacturing Choi, J.-S.; Jin, Y.-G.; Im, Yong-Taek, Key Engineering Materials, v.443, no.0, pp.164 - 169, 2010-06 |
The effect of inclination on impinging jets at small nozzle-to-plate spacing Choo, Kyo-Sung; Kang, Tae-Yeob; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.55, no.13-14, pp.3327 - 3334, 2012-06 |
The Effect of Kinematic and Kinetic Changes on Meniscal Strains During Gait Netravali, Nathan A.; Koo, Seungbum; Giori, Nicholas J.; Andriacchi, Thomas P., JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, v.133, no.1, 2011-01 |
The effect of meniscus on the permeability of micro-post arrays Byon, Chan; Kim, Sung-Jin, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.21, no.11, 2011-11 |
The effect of microstructure and texture evolution on mechanical properties of low carbon steel in a non-circular drawing sequence Hwang, Sun Kwang; Baek, Hyun Moo; Lee, Jung Wan; Son, Il-Heon; Im, Yong-Taek; Bae, Chul Min, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.2, pp.318 - 325, 2014-02 |
The effect of microstructure and texture evolution on mechanical properties of low-carbon steel processed by the continuous hybrid process Hwang, Sun Kwang; Baek, Hyun Moo; Son, Il-Heon; Im, Yong-Taek; Bae, Chul Min, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.579, pp.118 - 125, 2013-09 |
The Effect of Natural Gas Substitution Ratio and Diesel Injection Timing on Accuracy of In-cylinder Pressure Prediction DNN Model from Vibration Signal in a CNG-Diesel Dual-Fuel Engine Kim, G; Park, Chansoo; Kim, Wooyeong; Jeon, J; Jeon, M; Bae, Choongsik, Transactions of the Korean Society of Automotive Engineers, v.29, no.10, pp.909 - 919, 2021-10 |
The effect of negative pressure aging on the aggregation of Cu2O nanoparticles and its application to laser induced copper electrode fabrication Lee, H. S.; Yang, Min-Yang, PHYSICAL CHEMISTRY CHEMICAL PHYSICS, v.17, no.6, pp.4360 - 4366, 2015 |
The Effect of Oil Supply Conditions on the Dynamic Performance of a Hydrodynamic Journal Bearing Sang-Ik Son; Kyung-Woong Kim, KSTLE INTERNATIONAL JOURNAL, v.10, no.1, pp.6 - 12, 2009-12 |
The effect of oxygen and carbon dioxide concentration on soot formation in non-premixed flames Oh, KC; Shin, Hyun Dong, FUEL, v.85, no.5-6, pp.615 - 624, 2006-03 |
The effect of oxygen and carbon dioxide concentration on soot formation in nonpremixed flames using time resolved LII technique Oh, KC; Shin, Hyun Dong, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.19, pp.2068 - 2076, 2005-11 |
The effect of oxygen enrichment on incipient soot particles in inverse diffusion flames Jung, Yong-Jin; Oh, Kwang-Chul; Bae, Choong-Sik; Shin, Hyun-Dong, FUEL, v.102, pp.199 - 207, 2012-12 |
The Effect of Pad-asperity Curvature on Material Removal Rate in Chemical-mechanical Polishing Kim, Sanha; Saka, Nannaji; Chun, Jung-Hoon, Procedia CIRP, v.14, pp.42 - 47, 2014 |
The effect of piezoresistive microcantilever geometry on cantilever sensitivity during surface stress chemical sensing Loui, A.; Goericke, F. T.; Ratto, T. V.; Lee, Jungchul; Hart, B. R.; King, W. P., SENSORS AND ACTUATORS A-PHYSICAL, v.147, no.2, pp.516 - 521, 2008-10 |
The effect of plastic anisotropy on compressive instability in sheet metal forming Kim, JB; Yang, Dong-Yol; Yoon, Jeong Whan; Barlat, F, INTERNATIONAL JOURNAL OF PLASTICITY, v.16, no.6, pp.649 - 676, 2000 |
The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites Han, Song Hee; Oh, Hyun Ju; Lee, Hyun Chul; Kim, Seong Su, COMPOSITES PART B-ENGINEERING, v.45, no.1, pp.172 - 177, 2013-02 |
The effect of quartz nano-particles on the damage monitoring of adhesive joint at cryogenic temperature Yoon S.H.; Kim B.J.; Lee K.H.; Lee, Dai Gil, ADVANCED MATERIALS RESEARCH, v.93-94, pp.562 - 565, 2010-01 |
The effect of rigid-block length in elastomer-containing photoactive block copolymers on the photovoltaic and mechanical properties of polymer solar cells Lee, Heung-Goo; Lee, Jin-Woo; Oh, Eun Sung; Lee, Michael J.; Kim, Taek-Soo; Lee, Changyeon; Kim, Bumjoon J., JOURNAL OF MATERIALS CHEMISTRY A, v.12, no.30, pp.19039 - 19051, 2024-07 |
The effect of shrink fitting ratios on tool life in bolt forming processes Lee, Hyun Chul; Saroosh, MA; Song, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.209, no.8, pp.3766 - 3775, 2009-04 |
The effect of specimen geometry on the low cycle fatigue life of metallic materials Bae, Keun-Ho; Lee, Soon-Bok, MATERIALS AT HIGH TEMPERATURES, v.28, no.1, pp.33 - 39, 2011-03 |
The effect of strain-hardening on frictional behavior in tip test Kang, SH; Lee, JH; Cheon, JS; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.46, no.6, pp.855 - 869, 2004-06 |
The Effect of Surface Conditions on Friction by Tip Test Jung, Ki-Ho; Lee, Hyun-Chul; Ajiboye, Joseph S.; Kang, Seong-Hoon; Im, Yong-Taek, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.132, no.1, pp.011601-1 - 011601-7, 2010-01 |
The Effect of Swirl Ratio and Fuel Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low-Temperature COmbustion in an Automotive Diesel Engine Kook, Sanghoon; Bae, Choongsik; Miles, Paul C; Choi, Dae; Bergin, Michael; Reitz, Rolf D., SAE TRANSACTIONS, v.114, no.3, pp.1370 - 1381, 2006-04 |
The effect of temperature on low-cycle fatigue behavior of prior cold worked 316L stainless steel Hong, SG; Yoon, S; Lee, Soon-Bok, INTERNATIONAL JOURNAL OF FATIGUE, v.25, no.9-11, pp.1293 - 1300, 2003-09 |
The effect of temperature on the nanoscale adhesion and friction behaviors of thermoplastic polymer films Kim, Kwang-Seop; Ando, Yasuhisa; Kim, Kyung-Woong, NANOTECHNOLOGY, v.19, no.10, 2008-03 |
The effect of the misfit dislocation on the in-plane shear response of the ferrite/cementite interface Kim, Jaemin; Ghaffarian, Hadi; Ryu, Seunghwa; Kang, Keonwook, COMPUTATIONAL MATERIALS SCIENCE, v.173, 2020-02 |
The effect of the multi-pass non-circular drawing sequence on mechanical properties and microstructure evolution of low-carbon steel Lee, Jung Wan; Baek, Hyun Moo; Hwang, Sun Kwang; Son, Il-Heon; Bae, Chul Min; Im, Yong-Taek, MATERIALS & DESIGN, v.55, pp.898 - 904, 2014-03 |
The effect of the particle size distribution and packing structure on the permeability of sintered porous wicks Byon, Chan; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.61, pp.499 - 504, 2013-06 |
The effect of the shape of a tips apex on the fabrication of an AFM tip with an attached single carbon nanotube Lee, HW; Kim, Soohyun; Kwak, Yoon Keun; Lee, ES; Han, CS, SENSORS AND ACTUATORS A-PHYSICAL, v.125, pp.41 - 49, 2005-10 |
The effect of time-periodic heat flux oscillations in the steam reformer Park, J; Lee, S; Bae, Joongmyeon, CURRENT APPLIED PHYSICS, v.10, no.2, pp.S77 - S80, 2010-03 |
The Effect of Training Conditions on the Accuracy of In-cylinder Pressure Prediction DNN Model Using Engine Block Vibration in a CNG-Diesel Dual Fuel Engine Park, Chansoo; Kim, Gyeonggon; Kim, Wooyeong; Jeon, Jeeyeon; Jeon, Miyeon; Bae, Choongsik, Transactions of the Korean Society of Automotive Engineers, v.29, no.8, pp.751 - 763, 2021 |
The effect of tumble flow on lean burn characteristics in a four-valve SI engine Kang, KY; Oh, SM; Lee, JW; Lee, KH; Bae, Choong-Sik, SAE (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS, v.106, no.3, pp.981 - 989, 1997 |
The effect of varying impaction plate temperature on impactor performance: experimental studies Lee, BU; Kim, Sang Soo, JOURNAL OF AEROSOL SCIENCE, v.33, no.3, pp.451 - 457, 2002-03 |
The effect of wire drawing and aging on mechanical and electrical properties of Cu-Cr-Zr alloy Joo, Ho Seon; Kim, Yong Nam; Hwang, Sun Kwang; Im, Yong-Taek, Procedia Engineering, v.207, pp.1129 - 1134, 2017-11 |
The effects of hydrogen addition on engine power and emission in DME premixed charge compression ignition engine Jeon, Jee-Yeon; Bae, Choong-Sik, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.38, no.1, pp.265 - 273, 2013-01 |
The Effects of Injector Temperature on Spray and Combustion Characteristics in a Single Cylinder DISI Engine Bae, Choongsik; Moon, S; Choi, J; Abo-Serie, E, SAE SPECIAL PUBLICATIONS(SAE SP), v.0, no.1972, pp.61 - 72, 2005 |
The effects of interfacial adhesion strength on the characteristics of an aluminum/CFRP hybrid beam under transverse quasi-static loading Kim, Hee Chul; Lee, Jungju, COMPOSITES PART B-ENGINEERING, v.67, pp.595 - 606, 2014-12 |
The effects of late intake valve closing and different cam profiles on the in-cylinder flow field and the combustion characteristics of a compression ignition engine Kim, Jaeheun; Park, Stephen Sungsan; Bae, Choongsik, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.232, no.7, pp.853 - 865, 2018-06 |
The effects of material attenuation on acoustic resonance scattering from cylindrical tubes Lee, JP; Song, Ji Ho; Choi, MS, ULTRASONICS, v.34, no.7, pp.737 - 745, 1996-10 |
The effects of radiation shield and laser heating on the soot formation and oxidation of diffusion flame Lee, CB; Shin, Hyun Dong, JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, v.48, no.2, pp.279 - 285, 2005-05 |
The effects of surface roughness and bond thickness on the fatigue life of adhesively bonded tubular single lap joints Kwon, JW; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.14, no.8, pp.1085 - 1102, 2000 |
Discover