DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김선락 | ko |
dc.contributor.author | 이재학 | ko |
dc.contributor.author | 유중돈 | ko |
dc.date.accessioned | 2013-03-09T12:58:30Z | - |
dc.date.available | 2013-03-09T12:58:30Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2009-09 | - |
dc.identifier.citation | 대한용접접합학회지, v.27, no.4, pp.60 - 66 | - |
dc.identifier.issn | 1225-6153 | - |
dc.identifier.uri | http://hdl.handle.net/10203/96415 | - |
dc.description.abstract | The cylinder horn is designed to increase uniformity of the displacement on the output face through simulation and experiments for the simple cylinder, spool and step horns. The modal analysis is conducted numerically to calculate the vibration mode and stress distribution of the cylinder horn, and the design of experiment (DOE) technique is employed to determine the optimum configuration of the spool horn. Displacement of the cylinder horn was measured using the Laser Doppler Vibrometer (LDV), and experimental results show good agreements with the predicted results. It appears that uniformity higher than 95% can be achieved with the spool horn when the proper dimension of the groove is used. | - |
dc.language | Korean | - |
dc.publisher | 대한용접접합학회 | - |
dc.title | 초음파 용접용 실린더 혼의 설계 | - |
dc.title.alternative | Design of Cylinder Horn for Ultrasonic Welding | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 27 | - |
dc.citation.issue | 4 | - |
dc.citation.beginningpage | 60 | - |
dc.citation.endingpage | 66 | - |
dc.citation.publicationname | 대한용접접합학회지 | - |
dc.identifier.kciid | ART001372261 | - |
dc.contributor.localauthor | 유중돈 | - |
dc.contributor.nonIdAuthor | 김선락 | - |
dc.contributor.nonIdAuthor | 이재학 | - |
dc.subject.keywordAuthor | Ultrasonic welding | - |
dc.subject.keywordAuthor | Horn design | - |
dc.subject.keywordAuthor | Cylinder and Spool horn | - |
dc.subject.keywordAuthor | Step horn | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.