DC Field | Value | Language |
---|---|---|
dc.contributor.author | Moon, Byoung-Gi | ko |
dc.contributor.author | Sohn, Keun Yong | ko |
dc.contributor.author | Park, Won-Wook | ko |
dc.contributor.author | Lee, Taek Dong | ko |
dc.date.accessioned | 2013-03-07T01:32:33Z | - |
dc.date.available | 2013-03-07T01:32:33Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2007 | - |
dc.identifier.citation | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.449, pp.426 - 429 | - |
dc.identifier.issn | 0921-5093 | - |
dc.identifier.uri | http://hdl.handle.net/10203/89099 | - |
dc.description.abstract | The variation of soft magnetic properties of nanocrystalline Fe73Si16B7Nb3Cu1 (numbers indicate at.%) alloy powder cores as a function of milling time has been investigated. Amorphous ribbons were pulverized using a hammer mill after crystallization heat treatment at 550 degrees C for 1 h. Ball milling was carried out for the pulverized flake powder at room temperature for up to 36h. The powders were classified into 53-75 mu m and under 45 mu m particles and mixed with a binder for consolidation into a toroidal shape. The consolidated powder was annealed at 450 degrees C for 1 h for stress relief. Results show that the consolidation density of the flake-shaped nanocrystalline, alloy powder increased by 2.5-5% in theoretical density (0.2-0.4 g/cm(3)) by the ball milling process. The density increase is attributed mainly to the morphological change due to the milling, which yields smoothened particle edges. Excess milling induced fracture of particles, resulting in reduced density due to the reappearance of sharp edges. In coarse flake powder the permeability is mainly controlled by the density of the consolidates whereas it is dominated by the size distribution of particles in finer powder. The intrinsic coercivity of the powder was significantly influenced by the residual stress and demagnetization effect arising from the change in morphology. (c) 2006 Elsevier B.V. All rights reserved. | - |
dc.language | English | - |
dc.publisher | Elsevier Science Sa | - |
dc.subject | POWDER | - |
dc.title | Effect of milling on the soft magnetic behavior of nanocrystalline alloy cores | - |
dc.type | Article | - |
dc.identifier.wosid | 000245477800096 | - |
dc.identifier.scopusid | 2-s2.0-33847192443 | - |
dc.type.rims | ART | - |
dc.citation.volume | 449 | - |
dc.citation.beginningpage | 426 | - |
dc.citation.endingpage | 429 | - |
dc.citation.publicationname | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.contributor.localauthor | Lee, Taek Dong | - |
dc.contributor.nonIdAuthor | Moon, Byoung-Gi | - |
dc.contributor.nonIdAuthor | Sohn, Keun Yong | - |
dc.contributor.nonIdAuthor | Park, Won-Wook | - |
dc.type.journalArticle | Article; Proceedings Paper | - |
dc.subject.keywordAuthor | powder consolidation | - |
dc.subject.keywordAuthor | ball milling | - |
dc.subject.keywordAuthor | FINEMET | - |
dc.subject.keywordAuthor | nanocrystalline materials | - |
dc.subject.keywordAuthor | demagnetization | - |
dc.subject.keywordPlus | POWDER | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.