A methodology is presented for the failure prediction of the composite single lap bonded joints considering both the composite adherend and the bondline failures. An elastic-perfectly plastic model of the adhesive and a delamination failure criterion were used in the methodology. The failure predictions using the finite element analysis and the proposed methodology were performed. The failure prediction results such as failure mode and strength showed very good agreements with the test results for the joint specimens with various bonding methods and parameters. Based on the numerical investigation, the optimal joint strength condition was found and a new joint strength improvement technique was suggested. The suggested technique was verified to have a significant effect on the joint strength improvement. (c) 2007 Elsevier Ltd. All rights reserved.