Etching and passivation effects on boron-doped amorphous silicon carbide p layer of amorphous silicon solar cell by hydrogen treatment using a mercury-sensitized photochemical vapor deposition method
Etching and passivation effects of hydrogen treatment of boron-doped hydrogenated amorphous silicon carbide (a-SiC:H) film used as a p layer of p-i-n type amorphous silicon based solar cells using a mercury-sensitized photochemical vapor deposition method were investigated, For the hydrogen treatment of the p-layer film, longer p-layer deposition time was needed to obtain the same thickness as for no hydrogen treatment because of hydrogen etching effect, However, the cell performance was improved by similar to 7% due to an increase in the open circuit voltage (V-oc) and fill factor (FF) although the p-layer thickness was nearly identical in both cases, The increase in the V-oc and FF could be explained by an increase in the built-in potential due to a decrease in the film activation energy. Moreover, the electrical property improvement of the film was well explained by the passivation effect of a SiH2/SiH ratio decrease and a hydrogen content increase calculated from Fourier transformed infrared absorption measurements. (C) 1997 American Institute of Physics.