DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박현준 | ko |
dc.contributor.author | 유제용 | ko |
dc.contributor.author | 홍성준 | ko |
dc.contributor.author | 강형식 | ko |
dc.contributor.author | 나석주 | ko |
dc.date.accessioned | 2013-03-03T02:31:41Z | - |
dc.date.available | 2013-03-03T02:31:41Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1996-10 | - |
dc.identifier.citation | 대한용접접합학회지, v.14, no.5, pp.78 - 86 | - |
dc.identifier.issn | 1225-6153 | - |
dc.identifier.uri | http://hdl.handle.net/10203/76764 | - |
dc.description.abstract | Vision sensor was used to track the weld line of the compressor case. The compressor case was feed in fig equipped with the rotating system, and two torches having one degree of freedom was applied in automatic welding system. The radius of rotation for the compressor case is varying with each rotating angle, while, the angle velocity is constant. Therefore, an algorithm to expect the feature of the compressor case for versing rotation angle is needed. To over come the avove difficulties, the curve fitting and composite curve were used. The experiment to verify the proposed algorithm showed desirable results for tacking the welding line of compressor case. | - |
dc.language | Korean | - |
dc.publisher | 대한용접접합학회 | - |
dc.title | 시각센서를 이용한 비원형 압축기 케이스를 자동용접시스템 개발에 관한 연구 | - |
dc.title.alternative | A study on development of automatic welding system for compressor case using vision sensor | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 14 | - |
dc.citation.issue | 5 | - |
dc.citation.beginningpage | 78 | - |
dc.citation.endingpage | 86 | - |
dc.citation.publicationname | 대한용접접합학회지 | - |
dc.contributor.localauthor | 나석주 | - |
dc.contributor.nonIdAuthor | 박현준 | - |
dc.contributor.nonIdAuthor | 유제용 | - |
dc.contributor.nonIdAuthor | 홍성준 | - |
dc.contributor.nonIdAuthor | 강형식 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.