Browse "College of Engineering(공과대학)" by Type Thesis(Ph.D)

Showing results 8941 to 8960 of 10603

8941
난류확산 화염에서의 차등확산의 영향에 관한 연구 = A study on the differential diffusion effects in the turbulent diffusion flameslink

이병무; Lee, Byung-Moo; et al, 한국과학기술원, 1988

8942
난지도 매립지의 지하수 오염 방지를 위한 침출수 적정 관리 방안에 관한 연구 = Leachate control system development for ground water protection in Nan-Ji Do landfill sitelink

김용우; Kim, Yong-Woo; et al, 한국과학기술원, 1995

8943
난지도 매립지의 침출수에 의한 지하수 오염의 기여도 추정과 해석 = Prediction of leachate contribution to groundwater pollution around nanji landfill sitelink

윤석표; Yoon, Seok-Pyo; et al, 한국과학기술원, 1994

8944
날숨 분석용 반도체식 어레이 센서의 제작 및 특성 평가 시스템에 관한 연구 = The study on the arrayed semiconducting ceramic gas sensors and design of their characterization system for the analysis of exhaled breathlink

박광민; Park, Kwang-min; et al, 한국과학기술원, 2017

8945
낮은 상관 관계를 갖는 음장에서 음향 홀로그래피의 적용 = Application of acoustic holography to the sound field of low coherencelink

남경욱; Nam, Kyoung-Uk; et al, 한국과학기술원, 2004

8946
내부 순환 유동층 반응기에서의 비촉매 및 촉매 석탄 가스화 특성 연구 = Non-catalytic and catalytic coal gasification in an Internally circulating fluidized bed reactorlink

이종민; Lee, Jong-Min; et al, 한국과학기술원, 1998

8947
내생탈질 메커니즘을 이용한 저농도 하수의 생물학적 질소, 인 제거 특서 연구 = Characteristics of biological nutrient removal by endogenous nitrate respiration(ENR) mechanism from low strength wastewaterlink

박명균; Park, Myung-Gyun; et al, 한국과학기술원, 2001

8948
내연기관 피스톤-링 결합체 마찰력 측정 시스템의 개발 및 마찰력 측정에 관한 연구 = A study on the development of piston-ring assembly friction force measuring system and its measurement in I.C. engineslink

윤정의; Yun, Jeong-Eui; et al, 한국과학기술원, 1993

8949
내연기관의 피스톤계 마찰 거동 해석 = Analysis of piston assembly frictional behavior in an internal combustion enginelink

조성우; Cho, Sung-Woo; et al, 한국과학기술원, 2000

8950
넓은 속도범위의 혈류 이미징을 위한 하이브리드 빔스캐닝 방식의 정량적 혈류 및 혈관분포구조 광간섭단층영상 = Hybrid beam scanning based quantitative OCT angiography for wide dynamic range blood flow speed imaginglink

박태진; 오왕열; et al, 한국과학기술원, 2018

8951
논홀로노믹 이륜 도립진자형 주행로봇의 개발 = Development of nonholonomic two-wheeled inverted pendulum type mobile robotlink

김연훈; Kim, Yeon-Hoon; et al, 한국과학기술원, 2006

8952
높은 CO2 부분압 조건에서 CaCO3 흡착제 입자의 로 내 탈황 반응 특성 연구 및 반응 모델 개발 = Characteristic study and modeling of the in-furnace desulfurization of CaCO3 sorbent particles under high CO2 partial pressurelink

정성하; Jeong, Seongha; et al, 한국과학기술원, 2015

8953
능동 자기베어링에 기반한 무진공 소형 초원심분리기에 관한 연구 = (A) study on vacuum-chamber free small ultra-centrifuge based on active magnetic bearinglink

이민구; 김수현; et al, 한국과학기술원, 2018

8954
능동 창문 시스템을 이용한 저주파 대역 실내 소음제어 = Low frequency interior noise control with active window systemlink

권병호; Kwon, Byoung-Ho; et al, 한국과학기술원, 2013

8955
능동식 현가시스템용 전자비례 유압 감압밸브의 해석 및 설계에 관한 연구 = Dynamic analysis and design of an electro-hydraulic pressure reducing valve for active suspension systemslink

이동음; Lee, Dong-Eum; et al, 한국과학기술원, 1997

8956
능동형 주파수 선택막이 적용된 스텔스 레이돔에 관한 연구 = Study on stealth radome with actvie frequency selective surfacelink

손대성; 이정률; et al, 한국과학기술원, 2021

8957
니켈 - 텅스텐 담지촉매에서 에틸벤젠의 수소화 알킬기 제거반응 = Hydrodealkylation reaction of ethylbenzene over supported nickel - tungsten catalystlink

송요순; Song, Yo-Soon; et al, 한국과학기술원, 1992

8958
니켈-티타늄 형상기억합금의 압축하중 사이클을 이용한 양방향 형상기억거동의 특성에 관한 연구 = Characteristics of two-way shape memory behavior induced by compressive loading cycles in NiTi shape memory alloylink

김현철; Kim, Hyun-Chul; et al, 한국과학기술원, 2009

8959
니켈과 니켈기 합금에서 입계 각짐 현상과 입자성장 = Grain boundary faceting and grain growth in Ni and Ni alloyslink

이성보; Lee, Sung-Bo; et al, 한국과학기술원, 1998

8960
니켈기 초내열 합금에서 α-W 입자의 석출거동 및 고온강도에 미치는 영향 = The influence of α-W particles on the high temperature strength of Ni-base superalloylink

김현태; Kim, Hyon-Tae; et al, 한국과학기술원, 1998

rss_1.0 rss_2.0 atom_1.0