18901 | 연속 레이저 흡수에 의한 증발제거 과정의 관련 인자 영향 고찰 = Effect of parameters in evaporative removal process by absorption of a CW laserlink 김진윤; Kim, Jin-Yoon; et al, 한국과학기술원, 1994 |
18902 | 연속 매체를 위한 유닉스 화일 시스템 설계 = A UNIX file system for continuous medialink 임동선; Lim, Dong-Sun; et al, 한국과학기술원, 1996 |
18903 | 연속 멸균 모델을 이용한 가열멸균공정의 모사 = Simulation of heat sterilization using continuous sterilization modellink 김정원; Kim, Jeong-Won; et al, 한국과학기술원, 1999 |
18904 | 연속 시간 비최소 위상 시스템의 직접 적응 극배치 제어 = Continuous-time direct adaptive pole placement control of nonminimum phase systemslink 이선우; Lee, Seon-Woo; et al, 한국과학기술원, 1992 |
18905 | 연속 영상 분석에 의한 동체 유도에 관한 연구 = A study on the guidance system using passive dynamic imagerylink 홍선표; Hong, Sun-Pyo; 김명환; 윤명중; et al, 한국과학기술원, 1985 |
18906 | 연속 영상에 대한 복합적 영상 감축 방식의 비교 연구 = A study on the interframe hybrid codings for image sequenceslink 고종석; Koh, Jong-Seog; et al, 한국과학기술원, 1984 |
18907 | 연속 용융 아연도금 공정에서의 단부 과도금 현상에 대한 수치해석 = Numerical analysis of edge overcoating in continuous Hot-Dip galvanizinglink 안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2002 |
18908 | 연속 위상 변조 시스템을 위한 차등 검파 기반의 타이밍 동기 복구 = Differential-detection based timing recovery for continuous phase modulationlink 김인형; Kim, In-Hyoung; et al, 한국과학기술원, 1998 |
18909 | 연속 조업에서 생체농도의 전산제어 = Computer control of biomass concentration in continuous culturelink 이경범; Yi, Gyeong-Beom; et al, 한국과학기술원, 1985 |
18910 | 연속 증류를 이용한 벤젠과 클로로벤젠의 분리 = Separation of benzene from chlorobenzene mixture by continuous distillationlink 강신이; 김정돈; Kang, Shin-Ee; Kim, Jung-Don; et al, 한국과학기술원, 1979 |
18911 | 연속 하이브리드 공정을 이용한 알루미늄 고강도 볼트 성형 = High strength bolt forming of fine grained aluminum alloylink 김지훈; Kim, Ji-Hun; et al, 한국과학기술원, 2012 |
18912 | 연속 회분식 반응조의 수리학적 특성 및 영양 물질 제거 = Hydraulic characteristics and nutrient removal in SBRlink 이응택; Lee, Eung-Taek; et al, 한국과학기술원, 1992 |
18913 | 연속경로 제어에 있어서 특이성 회피방법 = A method for singularity avoidance in continuous path controllink 배경빈; Bae, Kyung-Bin; et al, 한국과학기술원, 1987 |
18914 | 연속생산형 검사방식의 경제적 운용방법과 그 응용 = Economic operating method of sampling plans in continuous production and its applicationlink 엄주태; Eum, Ju-Tae; 배도선; 황학; et al, 한국과학기술원, 1982 |
18915 | 연속적인 객체 분할과 분류 기법을 이용한 도시 환경에서의 빠른 주변 환경 인식 방법 = Fast scene understanding in urban environments using sequential segmentation and classificationlink 안승욱; Ahn, Seung-Uk; et al, 한국과학기술원, 2012 |
18916 | 연속적인 데이터 스트림에서 효율적인 술어 색인 방법 = An efficient predicate indexing method over continuous data streamslink 강우람; Kang, Woo-Lam; et al, 한국과학기술원, 2008 |
18917 | 연속체 수정법에 의한 S.D.M. 신뢰성 개선에 대한 연구 = A study on improving S.D.M. results by introducing continuous modification techniquelink 양군호; Yang, Koon-Ho; et al, 한국과학기술원, 1987 |
18918 | 연속회분식 반응조를 이용한 생물학적인제거공정의 효율향상을 위한 운전인자 연구 = Study of operation parameter for enhanced biological phosphorus removal in sequencing batch reactorlink 이상민; Lee, Sang-Min; et al, 한국과학기술원, 1993 |
18919 | 연속회분식 반응조를 이용한 질소와 인의 동시제거 = Simultaneous removal of nitrogen and phosphorus in SBR(sequencing batch reactor)link 전항배; Jun, Hang-Bae; et al, 한국과학기술원, 1989 |
18920 | 연쇄점 평가와 제품분배 모형 = Chain store evaluation and products allocationlink 조경환; Cho, Kyung-Hwan; et al, 한국과학기술원, 1981 |
18921 | 연신온도 및 연신배율이 일축 및 이축 연신된 폴리에틸렌나프탈레이트 필름의 기계적 물성에 미치는 영향 = Effects of processing temperature and stretch ratio on the mechanical properties of uniaxially and biaxially stretched poly(ethylene naphthalate) filmslink 명인호; Myung, In-Ho; et al, 한국과학기술원, 1994 |
18922 | 연약지반의 2차압밀 특성에 대한 실험적 고찰 = Experimental study on the secondary consolidation of soft claylink 라일웅; Ra, Il-Woong; et al, 한국과학기술원, 1991 |
18923 | 연역 규칙의 관리와 순환 질의 컴파일에 관한 연구 = A study on the management of deduction rules and the compilation of recursive querieslink 홍기형; Hong, Ki-Hyung; et al, 한국과학기술원, 1987 |
18924 | 연역 데이타베이스에서 가상 릴레이션을 통한 데이타베이스 갱신에 관한 연구 = A study on database update through derived relations in deductive databaseslink 조완섭; Cho, Wan-Seop; et al, 한국과학기술원, 1987 |
18925 | 연자성 재료의 자기이력곡선 측정 자동화에 관한 연구 = A study on automatic measurement of hysteresis loop for soft magnetic materialslink 이원창; Lee, Weon-Chang; et al, 한국과학기술원, 1985 |
18926 | 연주자를 위한 스테이지 인크로우져의 최적 설계 = Optimal design of stage enclosure for performerslink 이희원; Lee, Hee-Won; et al, 한국과학기술원, 1981 |
18927 | 연탄을 사용하는 온풍로에서의 열전달에 관한 연구 = A study on the heat transfer characteristics of a warm-air-furnace firing briquettelink 김재헌; Kim, Jae-Hun; et al, 한국과학기술원, 1977 |
18928 | 연화 점소성 재료에 대한 Semi-implicit 동적 유한요소해석 = Semi-implicit dynamic finite element analysis for softening viscoplastic materialslink 박종진; Park, Jong-Jin; et al, 한국과학기술원, 1993 |
18929 | 열 RC 네트워크 모델 기반의 전기자동차 배터리 팩 냉각시스템 열 시뮬레이션 프레임워크 및 냉각시스템 최적화 응용 = (A) thermal RC network model-based thermal simulation framework for electric vehicle battery packs and an application to cooling system optimizationlink 정민재; 장래혁; et al, 한국과학기술원, 2020 |
18930 | 열 대류 방식 가속도 센서의 성능향상에 관한 연구 = A study on the performance improvement of a micromachined convective accelerometerlink 오준석; Oh, Jun-Seok; et al, 한국과학기술원, 2006 |
18931 | 열 및 점성의 영향을 고려한 다공구조물 내의 음향 전파 = Sound propagation in porous structures considering visco-thermal effectlink 김한준; Kim, Han-Jun; et al, 한국과학기술원, 1994 |
18932 | 열 분해 카본의 제작방법 개발과 특성에 대한 연구 : 농도와 Bed 면적의 효과 = Study on the process development and the characteristics of pyrolytic carbon : effects of concentration and bed arealink 제정호; Jei, Jung-Ho; et al, 한국과학기술원, 1981 |
18933 | 열 영상 내 환자 자동 낙상 인식을 위한 다중 특징 결합 = Combining multiple features for automatic fall detection of patients using thermal imagerylink 김대언; Kim, Dae-Eon; et al, 한국과학기술원, 2016 |
18934 | 열 영상 시스템의 제작 및 특성 평가 = The fabrication and characterization of thermal imaging systemlink 강상구; Kang, Sang-Gu; et al, 한국과학기술원, 2000 |
18935 | 열 필라멘트법으로 제조한 다이아몬드 박막의 미세구조 제어 및 표면연마에 관한 연구 = A study on the microstructure controll and surface ppolishing of diamond film deposited b y hot-filament CVDlink 정상기; Jeong, Sang-Ki; et al, 한국과학기술원, 1994 |
18936 | 열 필라멘트법으로 제조한 다이아몬드 박막의 잔류응력 = Residual stress of diamond film deposited by hot-filament CVDlink 정대영; Jung, Dae-Young; et al, 한국과학기술원, 1995 |
18937 | 열 확산에 의한 미소입자의 부착현상에 관한 실험적 연구 = An experimental study of thermal diffusion effects on the deposition of small particleslink 장혁상; Chang, Hyuk-Sang; et al, 한국과학기술원, 1985 |
18938 | 열-진공 챔버를 이용한 우주환경하에서의 복합재료의 물성 저하 연구 = Degradation in material properties of composites under space environment using thermal-vacuum chamberlink 조석범; Cho, Seok-Beom; et al, 한국과학기술원, 2000 |
18939 | 열간 단조에서의 최적 예비형상 설계 = Optimal design of preform in hot forginglink 이석렬; Lee, Souk-Ryol; et al, 한국과학기술원, 2000 |
18940 | 열간 반경 단조의 2차원 유한 요소 해석 = Two-dimensional finite element analysis of hot radial forginglink 박치용; Park, Chi-Yong; et al, 한국과학기술원, 1990 |
18941 | 열간 압연의 유체 역학적 이론 = Hydrodynamic theory of hot rollinglink 황경현; Hwang, Kyung-Hyun; et al, 한국과학기술원, 1978 |
18942 | 열간압연 공정의 두께제어를 위한 유압서보시스템의 위치제어 = Position control of hydraulic servo system for thickness control in plate hot-rollinglink 김민영; Kim, Min-Young; et al, 한국과학기술원, 1998 |
18943 | 열간압연공정에서의 공정모니터링 데이터 분석을 위한 다중회귀분석법의 응용 = Application of multiple regression techniques for analyzing the process monitoring data in the hot strip milllink 박내학; Park, Nae-Hak; et al, 한국과학기술원, 1998 |
18944 | 열경화성 수지 복합적층 구조물의 성형 후 변형에 관한 연구 = Analysis of deformation after cure in thermoset matrix composite structurelink 박재성; Park, Jae-Sung; et al, 한국과학기술원, 1996 |
18945 | 열교 차장 유동분리 방법에 의한 Polystyrene 의 열확산 매개변수 측정 = Measurement of thermal diffusion parameters of polystyrene using thermal field flow fractionation methodlink 송기창; Song, Ki-Chang; et al, 한국과학기술원, 1985 |
18946 | 열기상증착법으로 합성한 ZnS 나노선의 구조적 특성 분석 = A study on microstructural characterization of ZnS nanowires synthesized by thermal vapor evaporation methodlink 선창우; Sun, Chang-Woo; et al, 한국과학기술원, 2005 |
18947 | 열단위로 계층화된 저밀도 패리티 검사 복호기의 FPGA 기반 구현 = FPGA-based implementation for column layered LDPC decoderlink 강준용; Kang, Jun Yong; et al, 한국과학기술원, 2016 |
18948 | 열린 공동 유동 해석과 제어 = Numerical analysis and open loop control of open cavity flowlink 장경식; Chang, Kyoung-Sik; et al, 한국과학기술원, 2002 |
18949 | 열린 균열을 갖는 회전체의 진동 특성에 대한 실험적 고찰 = Experimental investigation on vibration charateristics of the open cracked rotorlink 경진호; Kyung, Jin-Ho; 이종원; 김영대; et al, 한국과학기술원, 1988 |
18950 | 열민감성 하이드로젤의 팽윤거동과 4-acetamidophenol의 투과특성 = Swelling behavior of thermosensitive hydrogel and permeation of 4-acetamidophenollink 구영모; Koo, Young-Mo; et al, 한국과학기술원, 1994 |
18951 | 열방성 액정 block copolyester의 합성 및 그 성질에 관한 연구 = A study on the preparation and properties of thermotropic liquid crystalline block copolyesterslink 박재현; Park, Jae-Hyun; et al, 한국과학기술원, 1987 |
18952 | 열방성 액정 polyester 의 합성 및 blend 에 관한 연구 = A study on the thermotropic liquid crystalline polyesters synthesis and blendslink 김덕준; Kim, Deok-Jun; 장호남; 이원국; et al, 한국과학기술원, 1986 |
18953 | 열방성 액정 폴리에스터-등방성 중합체 블랜드의 유변학적 성질 = Rheological properties of thermotropic polyester-isotropic polymer blendslink 김연철; Kim, Youn-Cheol; et al, 한국과학기술원, 1991 |
18954 | 열방성 액정 폴리에스테르이미드 공중합체의 합성 및 물성에 대한 연구 = Synthesis and physical properties of thermotropic liquid crystalline copoly(ester-imide)slink 김상욱; Kim, Sang-Ouk; et al, 한국과학기술원, 1996 |
18955 | 열방성 액정분자가 폴리에틸렌테레프탈레이트의 결정화 속도에 미치는 영향 = The effect of thermotropic liquid crystalline polymer on the crystallization kinetics of poly (ethylene terephthalate)link 이민희; Lee, Min-Hee; et al, 한국과학기술원, 1989 |
18956 | 열방성 폴리에스터의 물성이 섬유방사의 신장비에 따라 폴리카보네이트 내에 형성된 폴리에스터 피브릴의 종횡비에 미치는 영향 = Effects of physical properties of thermotropic polyesters on the aspect ratio of the polyester fibril formed in polycarbonate for different draw ratios in fiber spinninglink 윤종화; Yun, Jong-Hwa; et al, 한국과학기술원, 1994 |
18957 | 열변형 충격에 의한 텔레비전 마찰소음 저감에 관한 연구 = Reduction of frictional impulse noise induced by thermomechanical deformations in TV setslink 표준호; Pyo, Joon-Ho; et al, 한국과학기술원, 2005 |
18958 | 열복사에 의한 고체연료 점화 연구 = Ignition of a solid fuel by thermal radiationlink 김명효; Kim, Myeong-Hyo; et al, 한국과학기술원, 1997 |
18959 | 열복사에 의한 수직 연료면의 점화현상 해석 = Ignition of a vertically positioned fuel plate by thermal radiationlink 한조영; Han, Cho-Young; et al, 한국과학기술원, 1995 |
18960 | 열분해 카본에 함유된 Soot particle 의 형성과 기계적 성질에 미치는 영향 = A study on the formation of soot particles included in pyrolytic carbon and its effects on mechanical propertieslink 오세민; Oh, Se-Min; et al, 한국과학기술원, 1985 |