Browse "College of Engineering(공과대학)" by Type Article
Showing results 37861 to 37920 of 62464
| Optimal design of a 1-rotational DOF flexure joint for a 3-DOF H-type stage Kim, Kyoung-Chon; Ahn, Da-Hoon; Gweon, Dae-Gab, MECHATRONICS, v.22, no.1, pp.24 - 32, 2012-02 |
| Optimal design of a CsI(Tl) crystal in a SiPM based compact radiation sensor Yoo, Hyunjun; Joo, Segyeong; Yang, Shiyoung; Cho, Gyuseong, RADIATION MEASUREMENTS, v.82, pp.102 - 107, 2015-11 |
| Optimal design of a double-sided linear motor with a multi-segmented trapezoidal magnet array for a high precision positioning system Lee, MG; Gweon, Dae-Gab, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, v.281, no.2-3, pp.336 - 346, 2004-10 |
| Optimal design of a flexure hinge based XYθ wafer stage Ryu, J.W.; Gweon, Dae-Gab; Moon, K.S., PRECISION ENGINEERING, v.21, no.1, pp.18 - 28, 1997-07 |
| Optimal design of a flexure hinge-based XYZ atomic force microscopy scanner for minimizing Abbe errors Kim, D; Kang, D; Shim, J; Song, I; Gweon, Dae-Gab, REVIEW OF SCIENTIFIC INSTRUMENTS, v.76, no.7, pp.376 - 391, 2005-07 |
| Optimal design of a new wheeled mobile robot based on a kinetic analysis of the stair climbing states Woo, CK; Choi, HD; Yoon, S; Kim, Soohyun; Kwak, Yoon Keun, JOURNAL OF INTELLIGENT ROBOTIC SYSTEMS, v.49, no.4, pp.325 - 354, 2007-08 |
| Optimal design of accelerated degradation tests based on Wiener process models Lim, Heonsang; Yum, Bong-Jin, JOURNAL OF APPLIED STATISTICS, v.38, no.2, pp.309 - 325, 2011 |
| Optimal design of accelerated degradation tests for estimating mean lifetime at the use condition Park, JI; Yum, Bong-Jin, ENGINEERING OPTIMIZATION, v.28, no.3, pp.199 - 230, 1997 |
| Optimal design of accelerated life tests under modified stress loading methods Park, SJ; Yum, Bong-Jin, JOURNAL OF APPLIED STATISTICS, v.25, no.1, pp.41 - 62, 1998-02 |
| Optimal design of accelerated life tests with two stresses Park, JW; Yum, Bong-Jin, NAVAL RESEARCH LOGISTICS, v.43, no.6, pp.863 - 884, 1996-09 |
| Optimal design of commercial vehicle systems using analytical target cascading Kang, Namwoo; Kokkolaras, Michael; Papalambros, Panos Y.; Yoo, Seungwon; Na, Wookjin; Park, Jongchan; Featherman, Dieter, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.50, no.6, pp.1103 - 1114, 2014-12 |
| Optimal design of composite hood with reinforcing ribs through stiffness analysis Kwak, DY; Jeong, JH; Cheon, JS; Im, Yong-Taek, COMPOSITE STRUCTURES, v.38, no.1-4, pp.351 - 359, 1997-05 |
| Optimal design of composite stiffened panel with cohesive elements using micro-genetic algorithm Kim, Soohyun; Kim, Chun-Gon, JOURNAL OF COMPOSITE MATERIALS, v.42, no.21, pp.2259 - 2273, 2008-11 |
| Optimal Design of Composite Stiffened Panel with Cohesive Elements using Micro-Genetic Algorithm Kim, Soo-Hyun; Kim, Chun-Gon, Journal of Composite Materials, Vol..42, No.21, pp.2259-2274, 2008 |
| Optimal design of electric vehicle public charging system in an urban network for Greenhouse Gas Emission and cost minimization Lee, Jinwoo; Madanat, Samer, TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES, v.85, pp.494 - 508, 2017-12 |
| Optimal design of experiments for optimization-based model calibration using Fisher information matrix Jung, Yongsu; Lee, Ikjin, RELIABILITY ENGINEERING & SYSTEM SAFETY, v.216, pp.107968, 2021-12 |
| Optimal design of filament wound structures under internal pressure based on the semi-geodesic path algorithm Kim, CU; Kang, JH; Hong, Chang Sun; Kim, Chun-Gon, COMPOSITE STRUCTURES, v.67, no.4, pp.443 - 452, 2005-03 |
| Optimal design of filament wound type 3 tanks under internal pressure using a modified genetic algorithm Kim, CU; Hong, Chang Sun; Kim, Chun-Gon; Kim, JY, COMPOSITE STRUCTURES, v.71, no.1, pp.16 - 25, 2005-10 |
| Optimal design of heat and water recovery system utilizing waste flue gases for refinery CO2 reduction Yoo, Haeun; Roh, Kosan; Al Hunaidy, Ali S.; Imran, Hasan; Lee, Jay Hyung, COMPUTERS & CHEMICAL ENGINEERING, v.124, pp.140 - 152, 2019-05 |
| Optimal design of high precision XY-scanner with nanometer-level resolution and millimeter-level working range Kang, Dongwoo; Kim, Kihyun; Kim, Dongmin; Shim, Jongyoup; Gweon, Dae-Gab; Jeong, Jaehwa, MECHATRONICS, v.19, no.4, pp.562 - 570, 2009-06 |
| Optimal design of microalgae-based biorefinery: Economics, opportunities and challenges Rizwan, Muhammad; Lee, Jay Hyung; Gani, Rafiqul, APPLIED ENERGY, v.150, pp.69 - 79, 2015-07 |
| Optimal design of offshore wind power farm in high resolution using geographical information system Kim, Sunwoo; Kang, Seongwhan; Lee, Jay H., COMPUTERS & CHEMICAL ENGINEERING, v.174, 2023-06 |
| Optimal design of periodic test input signals for multivariable impulse response models Kaisare, Niket S.; Lee, Jay H., OPTIMAL CONTROL APPLICATIONS METHODS, v.31, no.5, pp.451 - 469, 2010-09 |
| Optimal Design of Planar Three Degree of Freedom Redundant Manipulator Using Iterative Orthogonal Array Based Optimization kim kk; Yoon, Yong-San, SME TRANSACTIONS ON ROBOTICS RESEARCH, v.2, no.6, pp.1 - 20, 1992 |
| Optimal design of rotary-type voice coil motor using multisegmented magnet array for small form factor optical disk drive Jeong, Jaehwa; Gweon, Dae-Gab, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, v.46, no.5A, pp.2912 - 2914, 2007-05 |
| Optimal Design of Scara Type Robot Arm Section for Minimum Cycle Time Kim, Soohyun, MECHANICS IN DESIGN, pp.373 - 387, 1996 |
| Optimal design of step-stress accelerated degradation tests based on the Wiener degradation process Sung, Si Il; Yum, Bong-Jin, QUALITY TECHNOLOGY AND QUANTITATIVE MANAGEMENT, v.13, no.4, pp.367 - 393, 2016 |
| Optimal Design of Step-Stress Degradation Tests in the Case of Destructive Measurement Park, Sang-Jun; Yum, Bong-Jin; S. Balamurali, QUALITY TECHNOLOGY AND QUANTITATIVE MANAGEMENT, v.1, no.1, pp.105 - 124, 2004 |
| Optimal design of the adhesively-bonded tubular single lap joint Lee, SJ; Lee, Dai Gil, JOURNAL OF ADHESION, v.50, no.2-3, pp.165 - 180, 1995 |
| Optimal design of the exhaust system layout to suppress the discharge noise from an idling engine Ih, Jeong-Guon; Choi, C. -Y.; Kim, T. -K.; Jang, S. -H.; Kim, H. -J., INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.12, no.4, pp.617 - 630, 2011-08 |
| Optimal design of the press fit joint for a hybrid aluminum/composite drive shaft Kim, HS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.70, no.1, pp.33 - 47, 2005-08 |
| Optimal design of the pulse tube refrigerator with slit-type heat exchangers Ki, Tae Kyung; Jeong, Sangkwon, CRYOGENICS, v.50, pp.608 - 614, 2010-09 |
| Optimal design of thrust bearing for high-speed composite air spindles Kyung Geun Bang; Hui Yun Hwang; Lee, Dai Gil, INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, v.1/2, pp.173 - 197, 2004-06 |
| Optimal design of voice coil motor for micro stage Jeong, Jae Heon; Kim, Myeong Hyeon; Woo, Siwoong; Gweon, Dae-Gab; Hong,Dongpyo, Applied Mechanics and Materials, v.607, pp.507 - 510, 2014-07 |
Optimal Design of Wireless Charging Electric Bus System Based on Reinforcement Learning LEE, HYUKJOON; Ji, Dong Jin; Cho, Dong-Ho, ENERGIES, v.12, no.7, 2019-04 |
| Optimal Determination of Antenna Height and Power in a Mass per Swath Width Sense for a Given Incidence Angle Park, KM; Kim, Hyung-Myung, IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, v.45, pp.799 - 802, 2009-04 |
| OPTIMAL DIAGNOSTIC PROCEDURE FOR FAILURES IN A SERIES SYSTEM Park, Kyung Soo, INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, v.13, no.4, pp.409 - 412, 1982 |
| Optimal Dipole-Coil Ampere-Turns Design for Maximum Power Efficiency of IPT Choi, Byeong G.; Kim, Ji H.; Lee, Eun S.; Kim, Hoi-Rin; Rim, Chun T., IEEE TRANSACTIONS ON POWER ELECTRONICS, v.35, no.7, pp.7317 - 7327, 2020-07 |
| Optimal direction for monotone chain decomposition Shin, Hayong; Kim, DS, COMPUTATIONAL SCIENCE AND ITS APPLICATIONS - ICCSA 2004, PT 2 BOOK SERIES: LECTURE NOTES IN COMPUTER SCIENCE, v.3044, pp.583 - 591, 2004 |
| OPTIMAL DISCRETE-SYSTEMS USING TIME-WEIGHTED PERFORMANCE INDEX WITH PRESPECIFIED CLOSED-LOOP EIGENVALUES KWON, BH; Youn, Myung Joong, IEEE TRANSACTIONS ON AUTOMATIC CONTROL, v.33, no.11, pp.1078 - 1080, 1988-11 |
| Optimal Dispatch of a Two-Terminal Shuttle System Han, Youngnam; J.MacGregor Smith, STOCHASTIC MODELS, v.9, no.4, pp.639 - 655, 1993 |
| Optimal Display Color for Nighttime Smartphone Users Na, Nooree; Suk, Hyeon-Jeong, COLOR RESEARCH AND APPLICATION, v.42, no.1, pp.60 - 67, 2017-02 |
| Optimal domain adaptive object detection with self-training and adversarial-based approach for construction site monitoring Kim, Hyungsoo; Seong, Jaehwan; Jung, Hyung-Jo, AUTOMATION IN CONSTRUCTION, v.158, 2024-02 |
| Optimal dose reduction algorithm using an attenuation-based tube current modulation method for cone-beam CT imaging Son, Kihong; Chang, Jieun; Lee, Hoyeon; Kim, Changhwan; Lee, Taewon; Cho, Seungryong; Park, Sohyun; et al, PLOS ONE, v.13, no.2, 2018-02 |
| Optimal Dynamic Design of Anthropomorphic Robot Module with Redundant Actuators Sang Heon Lee; Byung-Ju Yi; Yoon Keun Kwak, 대한기계학회 영문 논문집, v.10, no.3, pp.265 - 276, 1996 |
| Optimal dynamic subcarrier allocation for dual-band OFDMA-PON supporting integrated fronthaul and backhaul in 5G networks Allawi, Yazan M.; Kim, Geun Young; Cho, Jungbum; Reza, Ahmed Galib; Na, Yongsoo; Rhee, June-Koo Kevin, ICT EXPRESS, v.4, no.3, pp.138 - 143, 2018-09 |
| Optimal Dynamic Transmission Scheduling for Wireless Networked Control Systems Ma, Yehan; Guo, Jianlin; Wang, Yebin; Chakrabarty, Ankush; Ahn, Heejin; Orlik, Philip; Guan, Xinping; et al, IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, v.30, no.6, pp.2360 - 2376, 2022-11 |
| OPTIMAL EARTH ESCAPE TRAJECTORY USING CONTINUATION METHOD AND COSTATE ESTIMATOR Lee, Donghun; Bang, Hyochoong, American Astronomical Society Meeting, 2008-01 |
| Optimal Earth-Moon Trajectory Design Using New Initial Costate Estimation Method Lee, Donghun; Bang, Hyochoong; Kim, Hae-Dong, JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, v.35, no.5, pp.1671 - 1676, 2012-09 |
| Optimal Embedding of Multiple Directed Hamiltonian Rings into d-dimensional Meshes Chwa, Kyung Yong, JOURNAL OF PARALLEL AND DISTRIBUTED COMPUTING, v.60, no.6, pp.775 - 783, 2000-01 |
| Optimal employment of color attributes to achieve saliency in icon matrix designs Choi, Kyungah; Suk, Hyeon-Jeong, COLOR RESEARCH AND APPLICATION, v.40, no.5, pp.429 - 436, 2015-10 |
| Optimal Encirclement Guidance Li, Hongyan; He, Shaoming; Wang, Jiang; Lee, Chang-Hun, IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, v.58, no.5, pp.4327 - 4341, 2022-10 |
| OPTIMAL ENCODING OF MICROCOMMANDS IN MICROPROGRAMMED PROCESSORS Park, In-Cheol; HONG, SK; Kyung, Chong-Min, ELECTRONICS LETTERS, v.26, no.6, pp.393 - 395, 1990-03 |
| Optimal Energy and Catalyst Temperature Management of Plug-in Hybrid Electric Vehicles for Minimum Fuel Consumption and Tail-Pipe Emissions Kum, Dongsuk; Peng, Huei; Bucknor, Norman K., IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, v.21, no.1, pp.14 - 26, 2013-01 |
| Optimal Engine Starts of an Input-Split Hybrid Electric Vehicle Zhuang, Weichao; Kum, Dongsuk; Peng, Huei; Wang, Liangmo; Li, Daofei, SAE INTERNATIONAL JOURNAL OF ALTERNATIVE POWERTRAINS, v.4, no.2, pp.343 - 351, 2015-07 |
| Optimal Erasure Selection of M-ary PAM Signaling for Errors and Erasures Decoding Algorithms Kwon, Yeong-Hyeon; Oh, Mi-Kyung; Park, Dong-Jo, IEEE TRANSACTIONS ON COMMUNICATIONS, v.56, no.12, pp.2071 - 2079, 2008-12 |
| An Optimal Estimator Model of Multi-Sensory Processing in Human Postural Control Park, Sukyung; Arthur D., Kuo, Key Engineering Materials, v.277/279, pp.148-154, 2005 |
| OPTIMAL EVALUATION OF PATH PREDICATES IN OBJECT-ORIENTED QUERIES SEO, SK; Lee, Yoon Joon, MICROPROCESSING AND MICROPROGRAMMING, v.40, no.10-12, pp.751 - 754, 1994-12 |
| Optimal fault tolerant gait sequence of the hexapod robot with overlapping reachable areas and crab walking Yang, JM; Kim, Jong-Hwan, IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART A-SYSTEMS AND HUMANS, v.29, no.2, pp.224 - 235, 1999-03 |
| Optimal feedback control strategies for state-space systems with stochastic parameters Lee, JayHyung; Cooley, BL, IEEE TRANSACTIONS ON AUTOMATIC CONTROL, v.43, no.10, pp.1469 - 1475, 1998-10 |
Discover
Open Access
Date issued
- 23,193 2020 - 2024
- 75,387 2010 - 2019
- 57,250 2000 - 2009
- 30,842 1990 - 1999
- 9,025 1980 - 1989