DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최진경 | ko |
dc.contributor.author | 이대길 | ko |
dc.date.accessioned | 2013-02-27T05:21:46Z | - |
dc.date.available | 2013-02-27T05:21:46Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1994-04 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.18, no.4, pp.835 - 845 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/66678 | - |
dc.description.abstract | In this paper, the effects of the adhesive thickness and adherend roughness on the static and fatigue strengths of the adhesively bonded circular single lap joints has been investigated by an experimental method. The stacking sequence effect of the composite adherend on the static and fatigue strength and the fracture patterns of the adhesive failure were also observed. Since the circular single lap joint fails catastrophically beyond the static strength of fatigue limit, the tubular polygonal adhesively bonded joints such as triangular, tetragonal, pentagonal, hexagonal as well as elliptical joints were manufactured in order to give partial mechanical characteristics to the adhesively bonded tubular joints. These joints were tested both in static and fatigue modes. From the experimental investigations, it was found that the fatigue strength of the circular adhesively bonded joints was much dependent on the arithmetical average surface roughness of the adherends and the polygonal adhesively bonded joints had better fatigue strength characteristics than the circular adhesively bonded joints. | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | 단면형상에 따른 단일겹치기 이음의 피로 및 정적 토크 전달특성에 관한 실험적 연구단면형상에 따른 단일겹치기 이음의 피로 및 정적 토크 전달특성에 관한 실험적 연구 | - |
dc.title.alternative | Effect of the Cross Sectional Shapes on the Static and Fatigue Torque Transmission Capabilities of Adhesive Single Lap Joints | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 18 | - |
dc.citation.issue | 4 | - |
dc.citation.beginningpage | 835 | - |
dc.citation.endingpage | 845 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.contributor.localauthor | 이대길 | - |
dc.contributor.nonIdAuthor | 최진경 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.